Laserfiche WebLink
SKILLED NURSING - 10 BED CONVERSION <br />FLTSP15008 <br />2. Furnish factory cut, nickel -silver large bow permanently inscribed with a visual key <br />control number as directed by Owner. <br />3. Existing System: Key locks to Owner's existing system. <br />E. Key Quantity: Provide the following minimum number of keys: <br />1. Change Keys per Cylinder: Two (2) <br />2. Master Keys (per Master Key Level/Group): Five (5). <br />3. Construction Keys (where required): Ten (10). <br />F. Construction Keying: Provide construction master keyed cylinders. <br />G. Key Registration List (Bitting List): <br />1. Provide keying transcript list to Owner's representative in the proper format for importing <br />into key control software. <br />2. Provide transcript list in writing or electronic file as directed by the Owner. <br />2.5 MECHANICAL LOCKS AND LATCHING DEVICES <br />A. Cylindrical Locksets, Grade 2 (Standard Duty): ANSI/BHMA A156.2, Series 4000, Grade 2 <br />certified. <br />1. Locks are to be non -handed and fully field reversible. <br />2. Acceptable Manufacturers: Basis of Design. <br />a. Sargent Manufacturing (SA) - 7-Line. <br />B. Tubular Locksets: <br />1. Standard tubular locksets designed to fit ANSI standard 161 door prep without additional <br />through -bolt preps. <br />2. Acceptable Manufacturers: Basis of Design. <br />a. Sargent Manufacturing (SA) — DL Series. <br />2.6 LOCK AND LATCH STRIKES <br />A. Strikes: Provide manufacturer's standard strike with strike box for each latch or lock bolt, with <br />curved lip extended to protect frame, finished to match door hardware set, unless otherwise <br />indicated, and as follows: <br />1. Flat -Lip Strikes: For locks with three-piece antifriction latchbolts, as recommended by <br />manufacturer. <br />2. Extra -Long -Lip Strikes: For locks used on frames with applied wood casing trim. <br />DOOR HARDWARE 087100 - 9 <br />