|
z
<br />Q
<br />C�
<br />D
<br />Cn
<br />G
<br />I
<br />0
<br />N
<br />N
<br />N
<br />0
<br />N
<br />EL.EGTRIGAL 5 EGIFIGATION5
<br />I. MATERIALS FURNISHED SHALL BE NEW. MATERIALS SHALL BE A MANUFACTURER'S
<br />STANDARD AND ESTABLISHED PRODUCT LINE, AND SHALL BE L15TED AND LABELED
<br />FOR THE APPLICATION BY UNDERhRITERS LABORATORIES (UL), OR SHALL BE
<br />CERTIFIED BY OTHER APPROVED LABORATORY OR BY THE BUILDIN6 OFFICIAL
<br />HAVING JURISDIGTIOK
<br />2. THE PLANS AC.C.OMPANYIN6 THESE SPECIFICATIONS ARE 6ENERALLY DIAGRAMMATIC
<br />AND DO NOT SHOW ALL DETAILS REQUIRED FOR THE COMPLETE WORK. ESTABLISH
<br />DETAILS OF THE WORK AS NECESSARY TO PROVIDE FOR THE COMPLETE
<br />INSTALLATION OF SYSTEMS AND MATERIALS. ARRAN6E THE WORK 50 AS TO AVOID
<br />INTERFERENCE WITH OTHER BUILDIN6 COMPONENTS OR SYSTEMS AS ACTUALLY
<br />INSTALLED.
<br />3. COMPLY WITH APPLICABLE OR NECESSARY JOB SAFETY PROVISIONS.
<br />4. PROVIDE FOR SYSTEM RAuCEMAYS, OUTLET BOXES, PULL "WIRES" OR "CORDS", OUTLET
<br />BOX OPENIN65, BOX EXTENSIONS, DEDICATED RECEPTACLES, BAGKBOARDS, ETC. AS
<br />SPECIFIED AND INDICATED. TELEPHONE GABLE SHALL BE FURNISHED AND INSTALLED
<br />BY OTHERS.
<br />5. ELECTRICAL SYSTEMS, EQUIPMENT, AND SUPPORTIN6 STRIIGTURES SHALL BE
<br />COMPLETELY AND EFFECTIVELY GROUNDED. BONDIN6 J141EIPS SHALL. BE PROVIDED
<br />WHERE NECESSARY. METAL ELECTRICAL RACEWAYS AND FITTIN65, JOINT5 AND
<br />CONrECTION5 AT EQUIPMENT SHALL BE MECHANICALLY AND ELEGTRIGALLY SECURED
<br />TO PROVIDE AN APPROVED EQUIR-IIENT OR ENCLOSURE 6ROUNDIN65 MEANS, EVEN WHEN
<br />NO OTHER SEPARATE 6ROUNDIN6zP MEANS ARE ALSO PROVIDED EITHER INHERENTLY OR
<br />BY BONDIN6.
<br />b. WERE 6R1E:N 6ROUNDIN67 CONDUCTORS ARE NOT INDICATED SPECIFICALLY FOR
<br />EACH BRANCH CIRCUIT BY THE DRANN65, PROVIDE FOR EACH RACEWAY A GREEN #12
<br />6ROUNDIN6 CONDUCTOR IN ADDITION TO BRANCH CIRCUIT CONDUCTORS INDICATED.
<br />1. L NLE55 OTHERWISE INDICATED OR DIRECTED BY THE ARCHITECT FOR SPECIAL
<br />APPLICATIONS, NRIN6 DEVICES SHALL BE INSTALLED WITH CENTER -OF -BOX MOUNTING
<br />HEIGHTS ABOVE FINISHED FLOORS BETWEEN 18-INC E5 AND 44-INGHE5, AS REQUIRED
<br />BY HANDICAPPED CODES. MOUNTING HE16HT5 FOR 5PEGIFIG DEVICES SHALL BE AS
<br />SGHEDUL.ED BY THE PLANS.
<br />8. ELECTRICAL CONDUCTORS SHALL BE COLOR CODED AS FOLLOWS:
<br />EQUIPMENT 6ROUND: 6REFN.
<br />PHASE CONDUCTORS: RED, BLUE, BLACK,
<br />NEUTRAL. WHITE;
<br />q. NOTIFY THE OWNERS REPRESENTATIVE OF ANY NONFUNGTIONIN6 MATERIAL OR
<br />POTENTIALLY UNSAFE CONDITION WITHIN THE PROJECT SYSTEMS THAT 15 OBSERVED
<br />DURING THE GONDUGT OF THE WORK.
<br />10. WORK SHALL BE FURNISHED AND INSTALLED A5 A MINIMUM IN ACCORDANCE WITH THE
<br />APPLICABLE REGIUIREMIENTS AND RECOMMENDATIONS OF THE LATEST LOCALLY
<br />ADOPTED EDITION OF CODES AND STANDARDS OF THE FOLLOWING:
<br />1. NATIONAL ELEGTRIGAL CODE 11`EC) - NFPA 10.
<br />2. ENER6Y CODE - A%PAE/IE5NA qO.1.
<br />3. LIFE SAFETY CODE - NFPA 101.
<br />4. OTHER NFPA STANDARDS: CIOA AND qq
<br />5. U.L. STANDARDS AND LISTIN6 REQUIREMENTS AND NEMA STANDARDS.
<br />6. FEDERAL, STATE, AND LOCAL LAWS, ORDINANCES, CODES, AND RULINGS OF
<br />BUILDIN6 OFFICIALS HAVING JURISDICTION IN ZEPHHYRHILL 5, FL.
<br />11. THE WORK COVERED BY THIS SPECIFICATION SHALL INCLUDE PROVIDIN6
<br />SUPERVI510N, LABOR, SUPPLIES, MATERIALS (TO INCLUDE EQUIPMENT), TOOLS,
<br />%RVICE5, DOCUMENTATION, TESTS 4 DEMONSTRATIONS, CERTIFICATES, AND DOLLAR
<br />COSTS REQUIRED TO CONSTRUCT THE COMPLETE SYSTEMS AS SPECIFIED HEREIN AND
<br />AS SHOWN BY THE PLANS AND OTHER RELEVANT DOCUMENTS.
<br />12. UNLESS OTHERWISE SPECIFICALLY SHOWN OR NOTED BY ELECTRICAL PLANS, PILOT
<br />DUTY CONTROL SYSTEMS AND RELATED WIRIN6 FOR MECHANICAL EQUIPMENT SHALL
<br />BE PROVIDED UNDER THE MECHANICAL SECTION OF THE SPECIFICATIONS.
<br />13. SERVICE EQUIPMENT SHALL BE PROVIDED RATED FOR BUILDING LOADS, INCLUJDIN6
<br />INTERRUPTING RATIN65. SERVICE EQUIPMENT SHALL BE SERVED U51% THE TYPE
<br />SERVICE ENTRANCE EQUIPMENT AS INDICATED BY THE PLANS.
<br />14. ALL RECEPTACLES SHALL BE 20A, 125V, SPECIFICATION GRADE, MOUNTED 18" AFF
<br />UNE55 NOTED OTHERWISE.
<br />15. FIRE ALARM HORN/SPEAKER AND STROBE DEVICES SHALL BE MOUNTED 80' AFF
<br />UNLESS NOTED OTHERWISE.
<br />16. 5WITGHES SHALL AS A MINIMUM BE 'HEAVY-DUTY' RATED, QUICK MAKE AND BREAK,
<br />SPECIFICATION 6RADE, SINGLE THIROW DDACE5.
<br />11. DISTRIBUTION EQUIPMENT U51% CIRCUIT BREAKER TYPE PROTECTIVE DEVICES SHALL
<br />USE BOLTED -ON OR SQUARE D' I -LINE DEVICES.
<br />18. DISTRIBUTION EQUIPMENT SHALL BE AS INDICATED AND A5 MANUFACTURED BY
<br />GENERAL. ELEGTRIG, GUTLER/HAMMER, SQUARE-D, SIEMENS.
<br />Iq. PAN U30ARD MAINS SHALL BE COPPER OR AL WITH BRANCH DEVICE
<br />CONNECTIONS ARRAN6ED IN A VERTICALLY DISTRIBUTED GONSEGUTIVE PHASE
<br />SEQUENCE SUCH THAT ONE OR MULTIPLE POLE BREAKERS CAN BE MOUNTED IN ANY
<br />P05IT10K A SOLID NEUTRAL BUS SHALL BE PROVIDED WITH A FEEDER LU6 AND WITH
<br />A SEPARATE SET -SCREW TERMINAL FOR EACH BRANCH GIRCIJIT POLE.
<br />20. STARTERS AND DISCONNECT SNTCHE5 SHALL HAVE QUICK -MAKE AND
<br />QUICK -BREAK MEGHANISMS, AND BE FULLY LY ENCLOSED.
<br />21. FIXTURE SUPPORTS AND HARDWARE SHALL BE SUITABLE METAL LHLE55
<br />OTHERWISE INDICATED. SUPPORT STUDS USED FOR INDOOR FIXTURE OR
<br />COMPONENT SUPPORT SHALL BE GALVANIZED STEEL OR MALLEABLE IRON; DIEGAST
<br />STUDS SHALL NOT BE USED. PROVIDE SEISMIC RESTRAINTS ON ALL FIXTURES PER
<br />LOCAL REQUIREMENT5.
<br />22. LAMPS SHALL BE MANUFACTURED BY 6ENERAL ELEGTRIG, PHILIPS, OR
<br />05RAM/SYLVANIA.
<br />23. 6ONDUGTOR5 SHALL BE OF SOFT DRAWN, ANNEALED COPPER HAVING A
<br />CONDUCTIVITY OF NOT LE55 THAN 48 PERCENT BY 'ASTM' STANDARDS.
<br />24. UNLESS OTHERWISE REQUIRED 13Y CODE OR INDICATED.
<br />A. CONDUCTORS NO. 12 AN& AND NO. 10 A 16 SIZE SMALL BE SOLID.
<br />B. CONDUCTORS NO.8 A116 SIZE AND LARGER SHALL BE STRANDED.
<br />25. R1610 STEEL AND IMG STEEL. CONDUIT, WHEN USED, SHALL BE HOT DIP 6ALVANIZED.
<br />STEEL EMT, WHEN USED, SHALL BE HOT DIP 6ALVANIZED OUTSIDE, AND ENAMEL OR
<br />6ALVANIZED FINISHED INSIDE.
<br />26. EMT COLIPLIN65 AND CONNECTORS SHALL BE METAL AND 5ET-5GREW TYPE.
<br />21. UNLESS OTHERWISE INDICATED, WIRING DEVIGE5 SHALL BE.
<br />I. SWTCHES: HIJBBEL 1221 OR EQUAL.
<br />2. RECEPTACLES: HIBBELL 20A HOSPITAL GRADE.
<br />3. COLOR AS SELECTED BY OWNER
<br />28. THE TELEPHONE AND SOUND SYSTEMS SHALL INCLUDE BACKBOARDS, RACEHAY5, OUTLET
<br />BOXES, PULL CORDS IN EMPTY RACEWAYS, COVER PLATES, AND MISCELLANEOUS
<br />MATERIALS OR DEVICES FOR TELEPHONE OUTLETS, ETC,. AS REQUIRED. PROVIDE GABLE
<br />WHERE INDICATED ON THE DRANN&5.
<br />2q. FIRE ALARM SYSTEM - SEE SHEET E-III.
<br />30. FIXTURES SHALL BE INSTALLED IN ACCORDANGE WITH UL LISTIN6 RESTRICTIONS AND
<br />LOCAL CODES AND ORDINANCES.
<br />31. FIXTURES SHALL BE LOCATED IN A MANNER COORDINATED WITH ANY SUSPENDED
<br />ACOUSTIC GEILIN6 PATTERN, AND IN ACLORDANGE WITH PATTERNS A5 SHOWN ON THE
<br />ARCHITECTURAL DRANN65.
<br />32. UNLESS OTHERWISE REQUIRED BY CODE OR FUNCTION OR INDICATED BY THE PLANS,
<br />CONDUCTORS FOR POWER AND LI&MN6 BRANCH CIRCUITS SHALL BE #12 AWG MINIMUM.
<br />NO SHARE NEUTRAL 15 ALLONED.
<br />33. CONDUCTORS SHALL BE CONNECTED BY UL. APPROVED CONNECTORS. BRANCH CIRCUIT
<br />WIRIN6 TO SIZE #8 SHALL BE CONNECTED BY CONNECTORS WITH LIVE SPRIN6 TENSION.
<br />34. WIRING SHALL BE INSTALLED IN METALLIC RACEWAYS AS ALLOWED AND SIZED PER NEC.
<br />35. RACEWAYS AND GABLE SHALL BE RUN CONCEALED, EXCEPT THAT RACEWAYS OB16NEED
<br />ONLY FOR SURFAGE MOUNTIN6 AND RACEWAYS AND GABLE IN EQUIPMENT ROOMS SHALL
<br />BE RUN EXPOSED, UNLESS OTHERWISE INDICATED. CONGEALED CONDUIT RUN ABOVE THE
<br />GEILIN6 LINE SHALL BE SUPPORTED INDEPENDENTLY OF CEILING CONSTRUCTION. WHERE
<br />CEILIN65 OF THE LAY -IN TYPE MAY 8E USED, CONDUITS MUST BE INSTALLED H16H ENOU61-I
<br />TO PERMIT REMOVAL OF CEILING PANELS OR EQUIPMENT.
<br />36. RP:GEWAY OR GABLE, ETC. THAT PENETRATES A FIRE BARRIER, SUCH AS FIRE OR SMOKE
<br />RATED SLAB, WALL, CEILING, OR OTHER ELEMENT, SHALL BE INSTALLED WITH MATERIALS
<br />AND METHODS APPROVED FOR THE APPLICATION BY LOCAL BUILDIN6 OFFICIALS. THE
<br />CONTRACTOR SHALL BE RESPONSIBLE FOR IDENTIFYING EACH FIRE BARRIER FROM THE
<br />ARCHITECTURAL PLANS, AND FOR SEGURIN6 APPROVAL OF MATERIALS AND MIETHOD5 TO
<br />BE USED FOR EACH TYPE PENETRATION.
<br />31. MLE55 OTHERWISE INDICATED, RAGEWAY5 SHALL BE AS FOLLOWS:
<br />I. CONGEALED INSIDE WHERE NOT IN WET OR DAMP LOCATIONS AND NOT EXPOSED
<br />TO MECHANICAL INJURY, AND USED FOR 12OV/20A BRANCH CIRCUITS:
<br />ELECTRICAL METALLIC, TUBING (i:Mf) OR GABLE THAT 15 L15TED IN NEC, 250.118 A5 AN
<br />ACCEPTABLE 6ROUNDIN6 RETURN PATH, SUCH AS TYPE AG/MG.
<br />2. THROU61-1 TWO-HOUR RATED FIRE BARRIERS OR BUILDIN6 EXTERIORS:
<br />6ALVANIZED M610 STEEL (61RS) CONDUIT MADE UP WATER T16HT.
<br />3. FINAL CONNECTION RACEWAYS IN DRY LOCATIONS SERVING 1-1614TIN6 FIXTURES,
<br />OR OTHER NON -MOTOR EQUIPMENT LIKELY TO REQUIRE MOVEMENT FOR
<br />ADJUSTMENT OR LIKELY To TRANSMIT SHOCK OR V113RATION INTO THE RACEWAY
<br />SYSTEM, BUT NOT REQUIRING FLEXIBILITY FOR OPERATION, AND WHERE
<br />APPROVED FOR THE APPLICATION SHALL BE FLEXIBLE METALLIC, TUBING (FLEX)
<br />WHERE APPROVED FOR THE APPLICATION.
<br />38. BOXES SHALL. NOT BE INSTALLED BACK-TO-BACK AND THRU-WALL TYPE BOXES SHALL
<br />NOT BE USED DUE TO TRANSMISSION OF SOUND OR HEAT AND SMOKE. OFFSET TO
<br />MAINTAIN FIRE RATING PER UL REQUIREMENTS.
<br />341. SUSPENDED CEILIN6 CONSTRUCTION SHALL NOT BE USED TO SUPPORT RAGEWAY5, BOXE5
<br />OR OTHER ITEMS, EXCEPT AS ALLOWED BY CODE, ACCEPTED BY THE EN61NIE K AND
<br />ACCEPTED BY THE ARCHITECT IN WRITING FOR THE SPECIFIC ITEMK) TO BE SUPPORTED.
<br />40. COVER PLATES FOR FLUSH, DRY, ORDINARY LOCATIONS SHALL BE STANDARD
<br />CDW16LRATIOK ONE PIECE, STANDARD SIZE PLATES WITH MATC4IN6 SCREWS, AND
<br />HAVING MATERIALS, 5TYLE5, AND FINISHES A5 SELECTED BY ARCHITECT.
<br />41. CONDUIT SYSTEM, IF USED, SHALL BE INSTALLED CONGEALED ABOVE GEILIN6, ABOVE
<br />LOWEST POINT OF STRUCTURAL STEEL SYSTEM LOWER CHORD FOR HORIZONTAL RUNS.
<br />INSTALL PARALLEL OR ICULAR TO STRUCTURAL NENBER6.
<br />42. CONFIRM THE FOLLOWING WITH THE OWNER PRIOR TO ROU6H-IN: EXACT LOCATIONS OF
<br />RECEPTACLES AND VOICE/DATA/TV OUTLETS; EXACT CONNECTION REQUIREM1EiNT5 OF
<br />OWNER -FURNISHED EQUIPMENT.
<br />43. CONFIRM THE EXACT LOCATIONS OF REGEPTAGLE5, SWITCHES, VOICVDATA/TV
<br />OUTLETS WITH MILLWORK/CASEWORK DETAILS AND ARCHITECTURAL ELEVATIONS.
<br />44. PER NEC 410.130(6), FLUORESCENT LUMINARIES THAT CONTAIN DOUBLE -ENDED LAMPS AND
<br />BALLASTS THAT CAN BE SERVICED IN PLACE REQUIRE A MEANS TO DISCONNECT
<br />SIMULTANEOUSLY ALL CONDUCTORS OF THE BALLAST, INGLUDIN6 THE 6ROUNDED
<br />CONDUCTOR. CONFIRM THIS REQUIREMENT 15 MET PRIOR TO ORDERING FIXTURES.
<br />45. ANY CONDUIT EXITING FROM THE INTERIOR TO THE EXTERIOR OF THE BUILDIN6 SHALL BE
<br />FILLED NTH AN APPROVED MATERIAL TO PREVENT THE CIRCULATION OF WARM AIR TO A
<br />COLDER SECTION OF THE RAGI3 AY PER NEC 300.1A. SEAL ALL CONDUITS ENTERING
<br />BUILDING TO PREVENT WATER EGRESS.
<br />46. WIRING IN PATIENT CARE AREAS SHALL COMPLY WITH NEC, ARTICLE 511.13. PATIENT CARE
<br />AREAS ARE TREATMENT FLOOR, PATIENT PREP, PRIVATE TREATMENT, PO HHD AND EXAMS
<br />ROOMS. ALL BRANCH GIRCJITS SHALL BE PROVIDED WITH AN EFFECTIVE GROUND -FAULT
<br />CURRENT PATH BY INSTALLATION IN A METAL RACEWAY SYSTEM OR GABLE HAVING A
<br />METALLIC ARMOR ASSEMBLY. THE A55EMBLY OR RACEWAY SHALL. ITSELF QUALIFY AS
<br />AN EQUIR-IIENT 6ROUNDIN6 CONDUCTOR IN ACWFOANGE NTH NEC 250.118. PROVIDE
<br />INSULATED COPPER EQUIPMENT 6ROUNDIN6 GONUUGTOR WITHIN OR PART OF THE
<br />ASSEMBLY OR RACEWAY AND BOND RECEPTACLES AND ALL NON-GGURRENT CARRYING
<br />CONDUCTIVE 5URFAGE5 OR FIXED ELECTRICAL IEGI UIPMENT. 517E 6RO1)NDIN6 CONDUCTOR
<br />IN AGGORDANGE WITH TABLE 250.122. WIRING IN PATIENT CARE AREAS INCLUDING
<br />LIGHTS SHALL CONSIST OF A WIRING METHOD THAT COMPLIES WITH THE
<br />REQUIREMENT5 L15TED ABOVE INCLUDING THE FIXTURE WHIP. ACCEPTABLE WIRING
<br />TYPE ARE AC, MG WITH GREEN STRIPE AND LISTED AS H05PITAL 6RADE OR
<br />WIRE -IN -CONDUIT. SUBMIT ALL PATIENT CARE WIRING FOR APPROVAL FROM THE
<br />ENGINEER PRIOR TO ROU&H-IN. ALL WIRING 15 DEDICATED FROM RECEPTACLE TO
<br />PANEL WITH NO SHARED NEUTRALS.
<br />ELEGTRIGAL 5YMBOL5
<br />YMBOL
<br />DE56RIPTION
<br />5YMf3OL
<br />DE5GRIPTION
<br />5YMBOL
<br />DE5GRIPTION
<br />HOMERUN TO PANEL, ARROWHEADS INDICATE QUANTITY OF CIRCUITS,
<br />NURSE GALL
<br />FIRE ALARM
<br />`
<br />2OA/IP UNLSS OTHERWISE NOTED
<br />E
<br />HASH MARKS INDICATE QUANTITY OF #12 WIRES IN 1/2" CONDUIT,
<br />co-
<br />NURSE GALL 5YSTEM DOME L16HT/ BUZZER - SINGLE BULB
<br />0-
<br />HEAT DETECTOR
<br />SHORT = HOT OR SW., LONG = NEUTRAL, LONG W/BEND = GROUND,
<br />NURSE GALL SYSTEM EMER6ENGY PULL CORD, 44" AFF
<br />0--
<br />DUCT SMOKE DETECTOR, PHOTOELEGTRIG TYPE
<br />NO MARKS INDICATES 2#12, 1#126 - 1/2"
<br />o-
<br />NURSE GALL PUSH BUTTON CORD, 44" AFF
<br />®
<br />MANUAL PULL STATION (+44" AFF UNO)
<br />CONDUIT GONGEALED_IN GEILIN6 OR WALL
<br />NURSE GALL SYSTEM MASTER STATION
<br />N4
<br />COMBINATION HORN/SPEAKER 4 STROBE L16HT
<br />CONDUIT EXPOSED_ _.
<br />N4
<br />STROBE L16HT
<br />'-�
<br />_
<br />CONDUIT IN FLOOR OR BELOW SLAB
<br />0D
<br />5PRINKLER WATER BELL
<br />�1Jlftl�
<br />FLEXIBLE CONDUIT
<br />s0--
<br />SMOKE DETECTOR, PHOTOELECTRIC TYPE
<br />o-`
<br />CONDUIT TURNED UP
<br />OUTLET MOUNTING
<br />VALVE TAMPER SWITCH
<br />�-
<br />CONDUIT TURNED DOWN
<br />®
<br />MISCELLANEOUS OUTLET - CEILING MOUNTED
<br />o-
<br />WATER FLOW 5WITGH
<br />MULTIPLE OUTLET ASSEMBLY
<br />OO -
<br />M15GELLANEOU5 OUTLET - WALL MOUNTED
<br />®
<br />CARBON MONOXIDE DETECTOR
<br />_
<br />CONDUIT SEAL FITTING
<br />?
<br />MISCELLANEOUS OUTLET - FLOOR BOX MOUNTED
<br />`O
<br />DISCONNECT SWITCH, VOLTAGE AS REQUIRED,
<br />NUMERALS INDICATE: AMP5/POLE5/FU5E5NEATHERPR0OF
<br />e--
<br />SIMPLEX RECEPTACLE, 20A (+18" AFF LINO)
<br />GIRGUIT BREAKER, VOLTA6E AS REQUIRED,
<br />DUPLEX RECEPTACLE 018" AFF UNO)
<br />NUMERALS INDICATE:_ AMP5/POLE5MEATHERPR0OF
<br />DUPLEX RECEPTACLE 044" AFF CENTER OF BOX LINO)
<br />_
<br />®
<br />MA61NETIG MOTOR STARTER, VOLTA6E A5 REQUIRED,
<br />QUADRUPL.EX REGEPTAGLE 13018" AFF UNO)
<br />NUMERALS INDICATE: TYF"IZE
<br />®-
<br />SPECIAL POWER RECEPTACLE, TYPE AS NOTED
<br />5EG11JR112C
<br />Lo
<br />COMBINATION FUSED 5WITCH / MA6NETIG MOTOR STARTER,
<br />DUPLEX RECEPTACLE FLOOR MOUNTED
<br />NUMERALS INDICATE: AMPS/POLES/FUSES i TYPE/SIZE
<br />01-
<br />TELEPHONE OUTLET (+18' AFF Lw)
<br />o--
<br />DOOR LOCK ELEGTROMA6NE , FAIL SAFE
<br />_
<br />PANELBOARD, FLUSH OR 5URFAGE MTD. RE5PEGTIVELY
<br />DATA OUTLET 018" AFF UNO)
<br />®
<br />PLYWOOD BACKBOARD, 3/4" THICK, 8' H16H, WIDTH AS INDICATED
<br />COMBINATION TELEPHONE/DATA OUTLET 018" AFF UNO)
<br />®
<br />WIREWAY, SIZE AS REQUIRED
<br />"A" INDIGATE5 ANAL06 TYPE DEVICE
<br />51,185CiRIPT5 APPLIED TO OUTLETS
<br />®
<br />PULLBOX/JUNCTION BOX, 51ZE AS REQUIRED
<br />COMBINATION TELEPHONE/DATA OUTLET FLOOR MOUNTED
<br />D
<br />"DEDICATED", PROVIDE ENGRAVED COVER PLATE
<br />_
<br />MOTOR, NUMERAL INDICATES HORSEPOWER, "F" = 1/8 HP OR LESS
<br />EP
<br />EXPLOSION PROOF, CLA55 AND DIVISION AS NOTED
<br />_
<br />®
<br />HfrATER, KW A5 INDICATED
<br />ISM
<br />61ROUND FAULT INTERRUPTER, FEED THRU TYPE
<br />TRANSFORMER
<br />MILE
<br />H
<br />HOSPITAL 6RADE
<br />Q--
<br />JUNCTION BOX
<br />16
<br />ISOLATED 6ROUND
<br />SHIMIM2x
<br />TRANSFORMER IN
<br />5A
<br />SAFETY TYPE, CHILDPROOF
<br />S
<br />51N6LE POLE SWITCH (+44" AFF UNO)
<br />SP
<br />SLR6E PROTECTED
<br />THREE WAY 5WITGH (+44" AFF UNO)
<br />AUDIO /VISUAL
<br />U
<br />"UPS", PROVIDE EN6RAVED COVER PLATE
<br />SL
<br />SWITCH W/INDIGATOR LIGHT 044" AFF UNO)
<br />_
<br />HP
<br />WEATHERPROOF
<br />MANUAL MOTOR 5WITGH (+44" AFF UNO)
<br />INTERCOM STATION 048" AFF UNO)
<br />5D
<br />SMOKE DAMPERS
<br />_ SD _
<br />DIMMER SWITCH (5YNER6Y ISD BC, 120/211 WH MIO) 044" AFF UNO)
<br />JUNCTION BOX
<br />5FO
<br />SMOKE FIRE DAMIPERS
<br />SLy
<br />0161TAL 5WITCH (CHELSEA GH_X BM PWH) 044" AFF UNO)
<br />TELEVISION JACK
<br />+??'
<br />MOUNTING HT ABOVE FINISHED FLOOR TO CENTERLINE OF DEVICE
<br />S
<br />TIMER 5WITGH (SEN50R5161ITGH PTS bO WH) (+44" AFF UNO)
<br />S
<br />OCCUPANCY SENSOR (SEN50RSWITGH W5X PDT WH)
<br />SQS2
<br />2P OCCA PANCY 5EN50R (SENSORSWITCH WSX PDT 2P WH)
<br />CEILING OC A PANGY SENSOR (SENSORSWITCH GM PDT q)
<br />Shepherd, Harvey & Associates, Inc.
<br />4855 River Green Parkway, Suite 400
<br />Duluth, Georgia 30096-2569 Fla. Cert. of Auth. No. 28961
<br />770-495-4007 FAX 770-495-7112 Project Number: 22-170
<br />cc
<br />(n
<br />Y
<br />c
<br />t-
<br />A
<br />o
<br />O
<br />4-
<br />•r4
<br />3
<br />H
<br />4-+
<br />L
<br />•.-1
<br />a
<br />Z
<br />O
<br />U
<br />co
<br />a
<br />-4
<br />0
<br />(q
<br />OL
<br />o
<br />c
<br />x
<br />^
<br />H
<br />N
<br />LL
<br />U
<br />r-
<br />C
<br />a)
<br />L
<br />C
<br />L
<br />H
<br />o
<br />0
<br />U
<br />�
<br />�
<br />U
<br />C
<br />C
<br />C U
<br />Q�
<br />.E Q
<br />M
<br />L cc
<br />Q a
<br />M
<br />cr)
<br />C
<br />Cl)Q
<br />Q
<br />z 00
<br />cc
<br />O W
<br />o
<br />w 00
<br />0
<br />�
<br />CD
<br />Q c
<br />m
<br />X U
<br />O
<br />Z -
<br />CM
<br />N
<br />Q N
<br />=)hO
<br />m
<br />Q ...
<br />LL
<br />Z
<br />0
<br />v�
<br />Z
<br />Q
<br />N
<br />W
<br />m
<br />Z
<br />0
<br />Lf)
<br />�
<br />U
<br />CM
<br />U)
<br />z
<br />>
<br />LL
<br />J
<br />Q
<br />(n
<br />Q
<br />M
<br />J
<br />Q
<br />`
<br />z
<br />=
<br />Q
<br />U)
<br />J
<br />Q
<br />W
<br />>-
<br />J
<br />rn
<br />T
<br />CL
<br />W
<br />N
<br />�
<br />M
<br />Z
<br />W
<br />N
<br />'`,���nuurrrrrr���
<br />0 R. zz.
<br />xw
<br />S.
<br />No, 93336
<br />STATE OF
<br />%FSS10N 1\\-
<br />101
<br />101
<br />RAWN BY:
<br />SPJ
<br />DATE: 10/ 11 /2022
<br />ROJECT NO.2022.12
<br />REV.
<br />REV.
<br />REV.
<br />REVISIONS
<br />Sheet No.
<br />E-001
<br />
|