|
MIAMf•[Alt►DE I A4MDECOiJNW
<br />Rolm PROD'UCTCONTROL SECTION
<br />11805 SW 26 sueek Room 208
<br />DEPARTMENT OF REGULATORY AND ECONOMIC RES01VACES(RER) Miami, Floods 33175-2474
<br />SOARDANDCODE ADMIMTRATIONDIVISION T(786)3I5-2590 F(aO315-:5"
<br />NOTICE OF ACCEPTA. CE (NOA) w,nrARbMiftsaetrvretottertes
<br />PGT Industries, Inc.
<br />1070 Technology Drive,
<br />North Venice. FL 34275
<br />SCOPE:
<br />This NOA is being issued under the appfliicable rules and regulations governing the use of cvnstructionmaterials. The
<br />documentation: submitted has been reviewed and accepted -by Miami -Made County RER -Product Control Section to
<br />be used m Nftami Dark County and Qtber areas whom allowed by true Authority Having Jurisdiction (AHI).
<br />This NOA shall not be valid after the expiration date stated below. The Miami Dade County Product Control Sec lion
<br />(In Mianu Dade County) andr'orthe AW (in areas other than Miami Dade County) reserve the right to have this
<br />product or material tested for quality asuralnce proposes. If thin product or material fails to perform in the accepted
<br />manner, the manufacturer wiM incur the expense of such testing and the AH7may im merliatelyrev oke_ mo dify. o r
<br />suspend the use of such product or material within their jurisdiction. RER reserves the right to revolve this
<br />acceptance. if it is determined byMiami-Dade County Product Control Section that this product or material fails to
<br />meet the requirements of theapplicable building code_
<br />This product is approved as described herein and has been designed to comply with the Florida Building Code,
<br />including the High Velocity Hurricane Zone_
<br />DESCRIPITON: Series "557012770*' Vinsi $riding Gla ss Door (Reinforced) ur1wt-o 90e & 1356 corners -LEI.
<br />APPROVAL DOCILM- U1T: Drawing No. MD-5.470.0 RerB, tided "Miinyl Sliding Glass DoorNOA (LM)", sheets
<br />1 through 21 of 21,preparedbyrnacufactu m. dated 1 W05115 and last revised on. 02/01121, signed and sealed by
<br />A. Lynn Mules. P.E., bearing the Miami -Dade CountyProduct Cool Recision stamp with the Notice of
<br />Acceptance number and expiration date by theNIia= Dade Courtly Product Control Section.
<br />11ISSILE L1iPACT RATING: Large aad Small Affksike In"ct Resista at
<br />Liutuba [ions:
<br />1 _ See table 1 (sheet .Z) and table 2 (sheet, for applicable SGD unit sizes, design pressures, reinforcements types,
<br />glass types, sill riser (see tables B-1 & B-2, sheets 7-8) and anchor layout sheets reguirmtents in 11 thru 16.
<br />2. Rigid White PVC, Tan (Non -white) Rigid PVC and Brown coated (Painted or laminated) white Rigid PVC to be
<br />labeled per referenced NOA'srequireunents.
<br />3. Egress operable do ors must comply with min clear width or height per FBC requirement as applicable.
<br />4. Pocket walls under separate approval, to be reviewed by Building official
<br />L ABELLNG: Each unit shall bear a permanent label with the manu€act roes name or logo, city. state and series and
<br />following statement: "Miami -Dade County Product Control! Approved% noted herein.
<br />RX-NEW AL of this NOA "be considered aft" a renewal application has been filed and there has been no
<br />change in the applicable building codenegatively affecting the performance ofthis product
<br />TERAU ATION ofthis NOA will occur after The expirsttion date or if there has been a revision or change in the
<br />materials, use. an&or manufacture of the product or process. Misuse of this NOA as an endorsement of any product,
<br />for sale$, advadisisng or any otterputposes shall automakc ally terminate this NOA. Failure to comply with any
<br />section of this NOA shall be cause for termination and removal of NOA.
<br />ADVERTISEIMF-Yr: The NOA number preceded by the words Miami -Dade County: Florida, and followed by the
<br />expiration date maybe displayed in advrstising bteratuce. Ifanypotionofthe NOAis displayed. then it shall be
<br />done in its entirety-
<br />LKSPECTION: A copy of this entire NOA shall be prozided to the user by the mamtfactuser or its disbfttors and
<br />shall be available for inspection at the job site at the request of the Building Official.
<br />ThisNOA revises & renews NOA#20-04'_9.05 and consists of this page 1 and e-oidence pages E- 1. E-21 E-3. E-4.
<br />E-5 & E-6 as well as approval document mentioned above.
<br />The submitted documentation was reviewed by Ishaq L C`Ownda, PE.
<br />NOA No. 21-0105.03
<br />/ Expiration Datet April 14, 2026
<br />i !�lvy 1 }fin ►:.�. Approval Date: March 2f, 2021
<br />Pat* 1
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDFNCESL7B?4ffITED
<br />2. Evidence Submitted under precious submittal
<br />A. DRAWINGS
<br />1. Drawing No. DID-5570.0 Rev B. titled -Vinyl Sliding Glass Door NOA W', sheets
<br />1 through 21 of 21, prepared by niwdactum. dated 10,05115 and last revised on
<br />0402/20, sighed and sealed by A_ Lynn Miller. P.E.
<br />B. TESTS
<br />1. Test reports on: 1) Air Infiltration. Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test. Loading per FBC_ TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loadingper FBC, TAS 203-94
<br />along with marked -up drawings and installation diagram of all PGT Industries, Inc.
<br />representative units listed below and tested to qualify Dowsd 791 and Dowsil 983 silicones,
<br />prepared by Fenestration Testing Laboratory. Inc., Test Reports No.:
<br />FTL-7897, PGT PW5520 PVC Fixed Window (unit 6 in proposal), dated 09103r 14
<br />FTL-20-2107.1. PGT SGD780 Aluumitu rn Sliding Glass Door (unit 7 in proposal) FTL-20-
<br />2107.2, PGT CA740 Alton Outsw-ing Cat Window (unit 8 iii proposal) FTL-20-
<br />2107.3, PGT PW7620A Aluminum Fixed Window (unit 9 in proposal) and FTL-20-2107.4.
<br />PGT PW7620A Ahunumu n Fixed Window (unit 10 in proposal) dated 07/13/20. all sighted
<br />and sealed by Idalmis Ortega, P.E.
<br />C. CALCULATIONS
<br />1. Anchor verification calculations and structural analysis, complying with FBC 76
<br />Edition (2020), dated 04l?2,20, prepared by manufactu r_ signed and sealed by
<br />Anthony Lynn Millet, P.E_
<br />2. Glazing complies with ASTM E 1300-04, -09, -12 and -1.6.
<br />D. QUA►LI ' V ASSURANCE
<br />Miami -Dade Department of Regulatory and Economic Resources (RER).
<br />E. V_ATERIAL CERTIFICATIONS
<br />1- Notice of Acceptance No.19-0305.02 issued to Kuraray America. Inc. for their
<br />"Trosifolt Uitraclear, Clear. and Color PVB Glass Interla`ers", expiring on
<br />07/080-4.
<br />2. Notice of Acceptance No.17-0808.02 issued toKararay.America, Inc. fortheir
<br />"SentryGiast (Clear and 4"7lite) Glass Intetlayers". cq)ihng on 07.D4123.
<br />3_ Notice of Acceptance No. 18-1106.10 issued to Vision Extrusions Limited for their
<br />"Brown Coated (Painted or Laminated). White Rigid PVC Exterior Extrusions
<br />for Windows and Doors". expiring on 0913024.
<br />4. Notice of Acceptance No.18-1106.11 issued to Vision Extrusions Limited for their
<br />series "VE 1000 Tan 202 and lighter shades (Non -!'!'line) Right! Cellular PVC
<br />Exterior Extrusions for Windows and Doors". eqp hnng on 1229121_ 1 6" 7
<br />Ishaq L Canada, P.E.
<br />Product Control [;;nit Supervisor
<br />NOA No. 21-0205.03
<br />Expiration Date: April 14,1026
<br />Approval Darr, March :+, 2021
<br />E -i
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANCE: EVMENCE SUBMITTED
<br />1. Evidence submitted under previous NOA
<br />A. DR A►'"T GS
<br />1. Manufacturer's die drawings and sections.
<br />(Submitted under ?1'0.4 X& 11-0107 04)
<br />2. Drawing No. MD-5570.0. titled `Vinyl Sliding Glass Door NOA (LTt+i}', sheets 1
<br />through 21 of21, prepared by manufactures, dated 10,t5115, with revision A dated
<br />04105f17, signed and sealer! by A. Lyme Miller, P.E.
<br />B. TESTS
<br />1 _ Test report on 1) Uniform Static Air Pressure Tess, per FBC. TAS 202-94
<br />?) Large Missile Impact Test per FBC, TAS 201-94
<br />3) Cyclic Wind Pressia a Loadingper FBC, TAS 2034A
<br />along with marked -cup drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc:, Test Report No. FTL 9717, dared 11VT15, signed and
<br />sealed by Idalmis Ortega. P. E. (Test report revised on 02/15.16 and OZ'24,16)
<br />2, Test report on 1) Air Infiltration Test, -per FBC, TAS 202 94
<br />2) Unifonn Static Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance Test, per FBC. TAS 202-94_
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Presme Loadingper FBC_ TAS 203-94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along withmadmd uP drawings and installation diagram ofvinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FM 8546, dated 1 l rt}6u`157 signed and
<br />sealed by Idahnis Ortega, P. E. (Test report revised on OliD 16 and 02111,2016)
<br />3. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test_ per FBC, TAS 202-94
<br />3) Water Resistance Test. per FBC, TAS 202-94
<br />4) Large MissileImpact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loadingper FBC, TAS 203-94
<br />6) Forted Entry Test, per FBC, TAS 202-94
<br />along with marked -up draw ings and installation diagram of vmyt sliding glass door, prepared
<br />by Fe nestratioa Testing Lab, Inc., Test Report No. FTL 8:547. dated 1-1/04/15. signed and
<br />sealed by Idahn7is Ortega, P. E. (Test report revised on 0211516)
<br />4. Test report on 1) AirIn?liltratitm Test. per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance Test per FBC, TAS 202-94
<br />4) Large Ivfsssiie Impact Test per FBC. TAS 201-94
<br />5) Cyclic Wind Pressure Loading per FBC, TAS '203-94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab; Inc., Test Report No. FTL 8548, dated 12104/15. signed and
<br />sealed by Idalnnis Ortega_ P. E_ (Test report revised on 01+0416 and ONI 11`16)_
<br />1 5 i''., 7 � Z /j R r+ 1.
<br />hhaq L Cl►aada, P.E.
<br />Product Control Unit Supervisor
<br />NOA `o. 21-0209.03
<br />Expiratioa lkie::dtpril 14, 2026
<br />Approval Date: March 25, 2011
<br />E -1
<br />CGI Windows and Doors, Inc.
<br />NOTICE OF ACCEPT AINCE: EVIDENCE SUBMITTED
<br />E. DL4.TERIAL CERTIFICATIONS (continue)
<br />5. Quanex Part Surer Spacer Standard complying with ASTM C518 Thermal Conductivity
<br />0.881 BTU -inn hr.-ft=-°F, ASIM F 1249 VArI R-Pass, ASIM D3985 Cxygm-Pass, ASIM E
<br />2190 I.G_ Durability No Fog -Pass. (Subntifted under previous A'0A. o.15-0409.05)
<br />6.. Qua= Part complying with ASTM C518 Themlal Conductivity 2.22 BTU -in,'
<br />hr, R" °F, ASTM F 1249 WVTR Pass, ASTM D 1434 Argon Pem e-PassS ASTM E
<br />2189 I.G. DumbilityNo Fog, ASTM E 546 Dew Point Development -2.0OF in 48 his.
<br />(Srtb rfffed under N10.4 No. 1S-0409.05).
<br />7_ Vision Extrusions, Ltd_ Parts complying with PVC-AAMA 303-13. Vohrntary Specification
<br />for Rigid Polyvinyl Chloride (PVC) Exterior Profiles for Vision ExtMisions, Ltd. VEX-1 by
<br />AAMA fenestration Exterior Profile Certification Program (Subirthled under.'VO.4 Na 1 S-
<br />0409.05)
<br />8. Vision Extrusions, Ltd. Parts complying with PVC-AAMA 303-13.
<br />(Submr`ffed under .n'0AA'o.15-0469.05)
<br />9. PVC-AAMA 303-13, Voluntary Specification for Rigid Polyvinyl Chloride (PVC) Exterior
<br />Profiles for Vision Extrusions. Ltd--VEX-1 by AAMA Fenestration Exterior Profile
<br />Certification Program.
<br />10. Notice of Acceptance No_ 18-1217.14 issued to Energi Fenestration Solution, USA, Inc. for
<br />their "Tan 3040 Ar light shade (non -white) White Rigid PVC Exterior Extritsions for
<br />Windows and Doors", expiring on 021104i21.
<br />11_ Notice of Acceptance No. 18-0122.02 issued to Energi Fenestration Solution, USA. Inc, for
<br />their series "%'ltihe Rigid PVC Exterior Extrusions for Windows and Doois'T, expirimg an
<br />02,281?3_
<br />12. Notice of Acceptance No_ 20-0203.03 issued to Energi Fenestration Solution, USA, Inc. for
<br />their "Bronze &light shade cap coated White Rind PVC Exterior Extrusions for
<br />Windows and Doors-, expiring on 04,16:25.
<br />F. STATEMENTS
<br />1. Statement letter of conformance to FBC 716 Edition (2020). dated 0422t?0. issued by
<br />manufacturer, signed and sealed by Anthony Lynn Miller. P.E.
<br />2. Statement letter of no financial interest and of independent. issued by manufacturer. dated
<br />04,118120, signed and sealed by Anthony Lynn Nfiller, PE_
<br />3. Private Labeling; Agm ment document between PGT, dated 033045 and signed by all
<br />involved parties.
<br />G. OTHERS
<br />1. This NOA revises N OA# 17-0420.06 (PVTtwrtCGI) and updates to FBC2020 (71 EditiouX
<br />expiring 0+21.21 _
<br />2_ RER Test proposals #194155 dated 011110120 approved by IshagI_ Chanda. P-E. expiring
<br />0411401.
<br />;Iva•,. � , t. ��r>,�,
<br />1
<br />Ishstq L Chaada, PE,
<br />Product Cootie! Unit Supervisor
<br />TTOA No. 21-0206.03
<br />Expiration Date: Aprill.4,2026
<br />Approval Date: March 1a, 2021
<br />E -5
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
<br />B. TESTS (continued)
<br />5. Test report on 1) Air lion Test, per FBC. TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC. TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94.
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Ulind Pressure Loadingper FBC, TAS 203-94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along with marked -up drawings and installation diagram of vinyl duhng glass door, prepared
<br />by Fenestration Testing Lab, Inc.. Test Report No. FTL W-49, dated 11,'0645, signed and
<br />sealed by Idalmis Ortega, P. E. (rest report revised on 12P0445 and 02f11116)
<br />6. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Unifamn Static Air Pressure Test. per FBC, TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 20294.
<br />4) Large Missile Impact Test per FBC. TAS 201-94
<br />5) Cyclic Wind Pressinre Loadingper FBC, TAS 203-94
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FTL 8552, dated 12,%15, signed and
<br />sealed by Idalnnis Ortega, P. E. (Test report devised on 02/1512016)
<br />7. Test report on 1) Uniform Static Air Pressurr Test- per FBC, TAS 202-94
<br />2) Lange Missile Impact Test per FBC, TAS 201-94
<br />3) Cyclic Wind Pressure Loadingper FBC, TAS 203-94
<br />along with marked -up drawings and motion diagram of tnrlyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FTL 6638 (samples A-1 thru A-22), dated
<br />11119110, signed and sealed by Jorge A. Causo, P. E. (Submh*d under NO.3 A`& I1-
<br />010704)
<br />8 Test repon on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Uniform Static .Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94.
<br />4) Large Missile InVact Test per FBC, TAS 201-94
<br />5) Cyclic 'gtrtind Pressure Loadingper FBC, TAS 203-94
<br />6) Forced Entry Test. per FBC, TAS 202-94
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inca Test Report No_ FTL 6337 (samples A-1 thin A-5). dated
<br />12/06110, signed and sealed by Jorge A_ Causo. P. E. (S'ubmh*d under A'44 A'o.11-
<br />0107 09)
<br />C. CALCULATIONS
<br />1 _ Anchor verification calculations and structural analysts, complying with FBC-2014,
<br />ncv-ucd by PGT, dated 12;0911Sand last redsed on 02115116, sighed and sealed by
<br />Anthony I.. Miller. P.E. (Sublrrilled tender 2V0 d j'N'v.13-1210 01i.
<br />2. Glazing zomphes with ASTMS-1300-09. 4
<br />1 �• iHi
<br />Ishaq L Chazda, P.E.
<br />Product Control Unit Supervisor
<br />NOA No. 21-0265.03
<br />Expiration Date: April 14,1026
<br />Approval Dates March 25, 2021
<br />E -2
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPT-ANCE: EVIDENCE SLBU ITTED
<br />3. New Evidence Submitted
<br />A. DRAT' FINGS
<br />1. Drawing No. AID-.k,970.0 Rev B, titled -Vinyl Sliding Glass DoorNOA (LW, sheets 1
<br />through 21 of 21, prepared by manufacturer, dated I0,,V5115 and Last revised on 02/01;21.
<br />signed and sealed by A. Lynn Miller, P.E.
<br />Note: This revision consists replacement of same existing installation screw with flat head_
<br />B. TESTS
<br />1. None..
<br />C. CALCULA11O1tiS
<br />I_ Norte.
<br />D. QUALITY ASSURANCE
<br />1. Miami -Dade Department of Regulatory and Economic Resources (RER).
<br />E. MATERIAL C:`ERTMCATIONS
<br />1. Notice of Acceptance No.19-0305.02 issued torKura•ati America. Inc. fortbeir
<br />"Trosdoit Uhrack-ar, Clear, and Color PVB Glass Interiay; err", expiring on 07rCf8124_
<br />2. Notice of Acceptance No.17-080&02 issued toKtu gray America, Inc. for their
<br />"SenhTGlasl, (Clear and'CUlaite) Glass Interiayeri", expiring on 0710423.
<br />3. Notice of Acceptance No.18-1106.10 issued to Vision Extrusions Limited for their `'Brown
<br />Coated (Painted or Laminated) White .Rigid P%"C Exterior Extrurio as for Windows
<br />and Doors", expiring on 0930024.
<br />-1. Notice. ofAcceptance No.19-1106.11 issued to Vision Extrusions Limited for their series
<br />"VB 1000 Tan 202 and lighter shades (Nee-i'Uhite) Rigid Cellular PVC Exterior
<br />Extrusions for Windows and Doors": expiring on 1129i21.
<br />F. STATE-MENTS
<br />1. Statement letter of conforumance to FBC 76 Edition (2020), dated 02.01?21, issued by
<br />manuufacturm, signed and sealed by Anthony Lynn Moller, P.E.
<br />2_ Private Labeling Agreement dated 03,4)8021 between PGT Industries, Inc. and CGI
<br />Windows and Doors Inc., sighed by Dean M Ruaazk, P.E., V.P. Engineering, on behalf of
<br />both c mmpanies.
<br />G. OTHERS
<br />L '!his NOA revises & renews NOA# 20-0429.05 (PLA w1CGI), expiring 04114/26.
<br />2. The current associated PLA CGI file #21-020&01, expiring 04!14,2.6.
<br />1-6
<br />Ishaq L Chards, P.E.
<br />Product Control L?nit Supervisor
<br />NOA No,11-020.4.03
<br />Expiration Date: April 14, 2026
<br />Approval Datr: March 2:;, 2021
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
<br />D. QUALM ASSURANCE
<br />1. Miami Dade Department. of Regulatory and Economic R.esotares (RER).
<br />E. MATERIAL CERTMCATIONS
<br />1. Notice of Acceptance No.1."529.14 issued to Vision Extrusion Limited for their
<br />" Whke Rigid PVC Exterior Eztnisions for U'indows and Doors", dated 08/13/15,
<br />expiring on 09,30?19.
<br />2. Notice of Acceptance No.16-0920.08 issued to Vision Extmsion Limited for their -17E
<br />1000 Tan 202 and lighter Shades (Nan-Mlitae) Rigid PVC EzteAar Extrusions for
<br />Windows and Doors". dated 12/08116. expiring on 12129.,21_
<br />3. Notice of Acceptance No.1.54528.15 issued to Vision Extmsion Lanited for their
<br />"Brown Coated (Painted or Laminated) White Rigid PVC Eunior Extrusions for
<br />' , endows and Doors", dated 08113.q 5. expiring on 09130119.
<br />4. Notice of Acceptance No.16-0712.02 issued to ENERGI Fenestration Solutions USA.,
<br />Inc. for their "TAN 3040 and Lighter Shades (Non-Mltite) Rigid PVC Exterior
<br />Extrusions for Windows and Doors" dated 0911516, expiring on 02,04121.
<br />5. Notice of Acceptance No.16-0712.04 issued to ENERGI Fenestration Solutions USA.
<br />Inc. for their 'Bronze and Lighter Shades of Cap Coated Rigid PVC Exterior
<br />Extrusions for Windows and Doors" dated 09115116, expiring on 04/16/20.
<br />& Notice of Acceptance No.16-0712.03 issued to ENERGI Fenestration Solutions USA,
<br />Inc. for their "Moire Rigid PVC Exterior Extivsions for Windows and Doors" dated
<br />0940117, expiring on 0212&118.
<br />7. Test reports No(s). 10-W2-792(A), 10-06-M0527., 535753-09, per ASTN E-84.
<br />ASTND 1929 and ASTMD-635. issued by EXOVA to Vision Extrumon for cellulosic
<br />composite material.
<br />(Submitted under A'0_4 AVo.11-0107.04)
<br />8_ Notice of Acceptance No.14-0916.11 issued to Kuraiay America., Inc. for then
<br />"Sen:tri-Glast. (Clear and White) Interh er". expiring on07104f18.
<br />9. Notice of Acceptance No.16-1117.01 issued to Kuraray America, Inc- for their
<br />'`Trosifollt- "traclear. Clear and Color Pi'B Interlajers". expiring on 07108119.
<br />F. STATEX.IE TS
<br />1_ Statement Letter ofcolforuance with FBC-5th Edition (2014) and FBC-6'0Edition
<br />(2017), issued by manufacturer, dated 09114117, signed & sealed by Lym Miller. P.E_
<br />2. Statement letter of no financial interest, dated 0411&17., issued by manufacturer, signed
<br />& sealed by Lynn Miller: P.E.
<br />3. Letter of lab compliance, part of the above test reports.
<br />4. RER Test Proposal No.17-0387. dated 051054 7, signed by Ishaq Chanda, P.E.
<br />G. OTHER
<br />1. Notice of Acceptance No.15-1210.01, issued to PGT Industries, for their Series
<br />557012770" Vinyl l Sliding Glass Door (Reinforced) - L.M1", g on 04114t21.
<br />E -3
<br />♦ Ishaq L Clanda, P.E.
<br />Product Control Unit Supervisor
<br />NOA Ne.:I-020z.03
<br />Expiration Date: April 14, 2026
<br />Approva 1 Data: ?!larch 2:, 2011
<br />,+...
<br />ty
<br />N
<br />Cl)
<br />O
<br />O
<br />O
<br />U
<br />L
<br />N
<br />O-
<br />C
<br />O
<br />O
<br />c
<br />cD
<br />-0
<br />CL
<br />0
<br />tU
<br />to
<br />N
<br />a
<br />0
<br />3
<br />a
<br />O
<br />CU
<br />U-
<br />O
<br />An
<br />E
<br />L
<br />(�
<br />p
<br />L
<br />t2
<br />1E
<br />c
<br />-0
<br />�O
<br />.c
<br />CU
<br />�
<br />CD_I---
<br />Q
<br />a
<br />z
<br />W
<br />J
<br />!V
<br />a
<br />o
<br />o
<br />W a
<br />M
<br />C M
<br />N
<br />02
<br />L6
<br />d
<br />yC
<br />%
<br />C
<br />(n
<br />v� y
<br />,c
<br />3=
<br />d
<br />E
<br />4 T
<br />C C7
<br />d
<br />t0
<br />C
<br />/9
<br />7
<br />-♦..+
<br />CD
<br />Ct5
<br />0
<br />1L
<br />Q
<br />U
<br />0
<br />CL
<br />Ca
<br />m
<br />d
<br />CL
<br />CU
<br />w
<br />'m
<br />J
<br />Z
<br />a
<br />J
<br />0-
<br />SHEET NO.
<br />PA 1 A
<br />August 10,
<br />
|