MIAM! MIAM DA.DECOUN
<br />PROD ii CTCONTROL SECTIOVY
<br />11905 SW16 streets Rom 208
<br />DEPA.RTMOff OF REGULATORY AND ECO-NOWC RESOURCES WM) M Florida 33175 2474
<br />BOARD AND CODE ADU IISTRATIONDM15MN T (7" 3I5-2590 F (7W 315-25"
<br />NOTICE OF ACCEPTANCE (NOA) *r**Misawdoe-20V0901mm•
<br />PGT Industries, Inc.
<br />1070 Technololpr Dtii-e,
<br />'_north Venice. FL 34275
<br />Score:
<br />This NOA is beingissued under the applicable rules and regulations governing the use of conshmctionmaterials. The
<br />documentation submi#M has been reviewed and accepted by Muni -Dade County RER -Product Control Section to
<br />be used in 14fratlai Dade County and outer areas where alluwed by the Aut mity Hawing dutmdictim (AW).
<br />This NOA shall not be valid after the expiration date statedbelow_ The Miami -Dade CountyProduct Control Section
<br />(In Mianu Dade County) en&or tine AHJ (in areas other than Miami Dade County) res erve the right to have this
<br />product or material tested for quality assurance purposes. If this product or material fails to pesfottn in the accepted
<br />manner, the maxw&cturer krill incur the expense of such testing and the AHJmay immuhatelyrev oke_ me difY, or
<br />suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this
<br />acceptance. if it is determined byNUami-Dade ConatyProduct Control Section that this product ormaterial fails to
<br />meet the requirements of theapplicable building code..
<br />This product is approved as described hesein and has been designed to comply with the Florida Building Code_
<br />including the High Velocity Hurricane Zone.
<br />DESCRIPTION: Series ` .4570J2770" Vinyl Sliding Glass Door (Reinforced) w,hro 9CP & 135e corners-L.Mi L
<br />APPROVAL DOCL'l EXT: Drawing No. _MD -5570.0 Rer-B, titled "Vinyl Sliding Glass Door NOA (11v1)", sheets
<br />1 through 21 of 21. preparedby ahanufachirer. dated I OM1115 and last revised on O'?-.t'01L 1, signed and sealed by
<br />A. Lynn Moiler, P.E.. bearing the Miami -Dade CrnmtyProduct Control Revision stamp with the Notice of
<br />Acceptance number and expiration date by the Mum -Dade Cauca Product Control Section.
<br />MISSILE IMPACT RATLNG: Large and Small1EMst'le Impact Resistant
<br />Lim ations:
<br />I- See table 1 (sheet 2) and table 2 (sheet ?)for apphcable SGD unit sizes, design pressures, reinforcements types.
<br />glass types, sill user (see tables B-1 & B-2. sheets 7-8) and anchor layout sheets requirements in 11 thru I &
<br />2. Rigid White PVC, Tan (Non -white) Rigid PVC andBrovm coated (Painted or laminated) white Rigid PVC to be
<br />labeled per retbrencedNOA'srequirements.
<br />3. Egress operable doors must ccmplywith min clear width or height per FBC requirement as applicable.
<br />4. Pocket walls under separate approval, to be reviewed by Building official
<br />L ABELING., Each unit shaltbear a permanent label with the nthannfacturer<.s name or logo, city, state and series and
<br />following statement. "Miami -Dade County Product Coamrcol Approved', rioted herein.
<br />RENEWAL of this NOA shall be considered after a rew al application has been filed and there has been
<br />change in the applicable budding code negahwly affecting the perfamuvice ofthis product.
<br />TER?l►M ATION ofthis NOA will occur after the expiration date or if there has been a rew im or change in the
<br />materials, use, an&or minifiKlute ofthe product or process. Misuse ofthis NOA as an endorsement of any product,
<br />for sales. advertising or any otherpu gxres shall automate ally terminate this NOA_ Failure to comply with any
<br />section of this NOA shall be cause for termination and removal ofNOA.
<br />ADVERTISE.ME T: The NOAnumber preceded by the words Miami Dade County. Florida, and foluwed by the
<br />expiration date maybe displayed in advertising literature_ If anyportion of the NOA is displayed. then it shall be
<br />done in its entirety.
<br />Lv SFECI'ION: A copy of this entire NOA shall beprotaded to the userbythe m mrfactuser or its disufttors and
<br />shall be available &t in speetim at the job site at the request of the Budding Offxial.
<br />This NOA rex ises & renews NOA#20-0429.05 and consists of this page 1 and evidencepages E-1. E-2, E-3. E-4,
<br />E-5 & 1<6 as well as approval document mentioned ab(me-
<br />The submitted documentation was reviewed by Ishaq L Cltanda, PE.
<br />NO A No. 21-0205.03
<br />( / Expiration Datet April 14, 2016
<br />t" rl f�q n �, Approval DatoXarrh.19, 2021
<br />Page 1
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANCE: EV DENCE SUB?bIITTED
<br />2. Evidence Submitted under precious .submittal
<br />A. DRAWINGS
<br />1. Drawing No. MD-5570.0 RerB. titled "Vinyl Sliding Glass Door NOA tLI++1)" sheets
<br />I through 21 of 21. prepared by manufacturer. dated 10.05115 and last revised on
<br />04r2120, signed and sealed by A- Lynn Miller. P.E.
<br />B. TESTS
<br />1. Test reports on: 1) Air infiltration Test, per FBC. TAS 202-94
<br />2) Uniform Static Air Pressure Test. Loading per FBC. TAS 202-94
<br />3) Water Resistance 'Test, per FBC, TAS 202-94
<br />4) Large Missile Impact Test per FBC. TAS 201-94
<br />5) Cyclic Ulind Pressure Loading per FBC. TAS 203-94
<br />along with marked: -up drawings and installation diagram of all PGT Industries, Inc.
<br />representative units listed below and tested to qualify Dowsi1791 and Dow sit 983 silicones,
<br />prepared by Fenestration Testing Laboratory, Inc.. Test Reports No.:
<br />FTL-7897, PGT PW5520 PVC Fixed Window (unit 6 in proposal), dated 09/03/14
<br />FTL-20-2107.1, PGT SGD780 Aluminum Sliding Glass Door (unit 7 in proposal) FTL-20-
<br />2107.2, PGT CA740 Alum Outswing Casement Window (unit 8 in proposal) FTL-20-
<br />2107.3, PGT PW7620A Aluminum Fixed Window (unlit 9 in proposal) and FTL-20-2107.4.
<br />PGT PW7620A Aluminum Fined Window (unit 10 in proposal) dated 071131.0. all signed
<br />and sealed by Idalrnis Ortega. P.E.
<br />C. CALCULATIONS
<br />1. Anchor verification calculations and structural analysis, complying with FBC 7*
<br />Edition (202ft dated 0422'20, prepared by mam factuner, signed and sealed by
<br />Anthony Lynn I1Mer, P.E.
<br />2. Glazing complies with ASTV. E1300-04, -09. -12 and -16.
<br />D. QUALITV ASSUR.A N CE
<br />Miami -Dade Department of Regulatory .and Economic Resources (RER).
<br />E. 3 lTERLAL CERTIFICATIONS
<br />1. Notice of Acceptance No.19-0305.02 issued to Kuraray America" Inc. for their
<br />"Trosifolt UTltraclear, Clear, and Color PCB Glass Interlayerf'. expiring on
<br />07108,24.
<br />2. Notice of Acceptance No.17-0803.02 issued to Kuraray America, Inc. for their
<br />"SentryGhst (Clear and White) Glass Inter] Yers", tatpiritlg on 07i 41?3.
<br />3. Notice of Acceptance No. 18-1106.10 issued to Vision. Extrusions limited for their
<br />"Brown Coated (Painted or Laminated) 'White Rigid PVC Exterior Extrusions
<br />for Windows and Doors", expiring on 09/30r24.
<br />4. Notice of Acceptance No.18-1106.11 issued to Vision Extrusions Limited for their
<br />series "YE 1000 Tan 202 and lighter shades (Non -White) Rigid Cellular PVC
<br />Exterior Extrusions for Windows and Doors". expiring on 111-9//21. IA ` � � Of .4
<br />Ishaq L Chasers, P.E.
<br />Product Control unit Supervisor
<br />NOA No. 21-0205.03
<br />Expiration Data: April 14, 2026
<br />Approval Date: Marti 2;, 2021
<br />E -t
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
<br />1. Evidence submitted under previous NOA
<br />A. DRAWINGS
<br />1- Manufactu er's die drawings and sections.
<br />(Submi ted under , 0.4 .Vo. JI-0107. 04)
<br />3_ Drawing No. MD-5570.0, titled "Vinyl Sliding Glass Door NOA (i.M)", sheets 1
<br />through 21 of 21, prepared by manufactures, dated 10105115, with revision A dated
<br />OV05117, signed and sealed by A. Lynx Mincer, P.E.
<br />B. TESTS
<br />1 _ Test report on 1) Uniform Static Air Pressure Test, per FBC_ TAS 202-94
<br />2) Large Missile Impact Test per FBC. TAS 201-94
<br />3) Cyclic Wind Presswe Loading per FBC, TAS 203-94
<br />along withmarkedup drawings and installation diagram of-%*vl sliding glass door. prepared
<br />by Fenestration Testing Lab, Inc.. Test Report No- FTL 8717, dated 12207/15. signed and
<br />sealed by Idalmis Ortega. P_ E. (Test report revised on 02/15.16 and 02. 34116)
<br />2. Test report on 1) Air Infiltration Test,. per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resista noe Test, per FBC, TAS 202-94_
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Prune Loading per FBC, TAS 20394
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along withmadmdup drawings and installation diagram ofv nyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FTL 8546, dated 11106115. signed and
<br />sealed by Idalmis Ortega, P_ E. (rest report revised on O VO4,16 and 02,q 2016)
<br />3. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Prune Test: per FBC, TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 20294
<br />4) Large Missile Impact Test per FBC, TAS 20194
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 203.94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along with madmdup drawings and installation. diagram of vinyl sliding glass door prepared
<br />by Fenestration. Testing Lab, Inc., Test Report No_ FTL 85.17. dated 12104115, signed and
<br />sealed by Idalmis Ortega, P_ E. (rest report raised on 0?.'15116)
<br />4. Test report on 1) Air Infiltration Test, per FBC. TAS 2W-94
<br />2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance Test, per FBC. TAS 20294
<br />4) Large Missile Itnact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FTL &W. dated 12104/15, signed and
<br />sealed by Idahmis Ortega, P. E. (Test report revised on 01 r'04116 and 02111r'16). pp
<br />j:j S+yr d i Z E !)..
<br />hhaq L CLaad:t, P.E.
<br />Product Control fait Supervisor
<br />NOA No.:1-0205.03
<br />Expiration Dow April14,2026
<br />Approval Date: btareL 25, 2021
<br />E -1
<br />CGI Windows and Doors, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
<br />E. -MATERIAL CERTIFICATIONS (continue)
<br />5. Quanm Part Sumer St)acef Standard complying with ASTM C518 Thermal Conductivity
<br />0.881 BTU -in/ hr. fV-`F, ASTM F 12.49 WVTR Pass, ASTM D3985 Oxygen -Pass; ASIM E
<br />2190 I.G. Durability -No Fog Pass. (Subirt turd under pretions XV0.4 A'o. I "409 05)
<br />6. Quanex Part Duraseal complying with ASTM C518 Thermal Conductivity 2.22 BTU -in/
<br />fir- W-'F, ASTM F 1249 RTM Pass, ASTM D 1434 Argon P+e a -Pass, ASTM E
<br />2189 I.G. Durability No Fog, ASTM E 546 Dew Point Developnxmt -20°F in 48 hrs.
<br />(Submhoed under N,0.4 No. 15-0409.05).
<br />7_ Vision Extrusions_ Ltd. Parts complying with PVC-AAMA 303-13. Voluntary Specification
<br />for Rigid Polyvinyl CUbnde (PVC) Exterior Profiles for Vision Extrusions, Ltd. VEX-1 by
<br />AAMA Futon Exterior Profile Certification Program (Srtbmifted under NO 4 A'o. 1 S-
<br />0409 05)
<br />8_ Vision Extrusions, Ltd. Parts complying with PVC-AAIv1A 30343.
<br />(Srtbm (rued under A'0.4.?'o.15-0469 05)
<br />9. PVC-AAMA 303-13, Vohrntary Specification for Rigid Polyvinyl Chloride. (PVC:) Exterior
<br />Profiles for Vision Extrusions., Ltd -VEX-1 by AAMA Fenestration Exterior Probe
<br />Certification Program
<br />10. Notice of Acceptance No_ 18-1217.14 issued to Energi Fenestration Solution, USA, Inc. for
<br />their "Tan 3040 & light shade (non -white) 111doe Rigid PVC Exterior Extrusions for
<br />Windows and Doors expiring on 02/C4,21.
<br />11. Notice of Acceptance No. 18-0122.02 issued to Energi Fenestration Sohrtion, USA. Inc. for
<br />their series "White Rigid PVC Exterior Extrusions for Windows and Doors`, mpinng on
<br />02,28/23..
<br />12. Notice of Acceptance No. 20-0203.03 issued to Energi Fenestration Solution, USA. Inc_ for
<br />their `Bronze & light shade cap coated White Rigid PVC Exterior Extrusions for
<br />Windows and Doors', expiring on 04-1160-5.
<br />F. STATE?llENTS
<br />1. Statement letter of conformance to FBC: 71b Edition (2020). dated 042220• issued by
<br />tmarmfkhuer, signed and sealed byAnthony Lynn Miller, P.E_
<br />2. Statement letter of no financial interest and of independent. issued by manufacturer, dated
<br />04' 18120, signed and sealed by Anthony Lym1 Miller, PE_
<br />3. Private Labeling; Agreement document between PGT. dated 03,3045 and signed by all
<br />un,olved parties.
<br />G. OTHERS
<br />1. This NOA. revises N OA# 17-0420.06 (PVT wrCGI) and updates to FBC2020 (16 Edition),
<br />expiring 0421./21 _
<br />2. RER Test proposals #194155 dated 0110.20 approved by Ishaq I_ Chanda, PE, expiring
<br />04114r2L
<br />E -5
<br />F
<br />I*xq L CLaada, P.E.
<br />Product Control Unit Saponisor
<br />NOA No, 21-020;.03
<br />Expiration Date: April14,20!6
<br />Approval Do to. Marck 3 , 2021
<br />PGT Industries. Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUTB3ffITED
<br />B. TESTS (continued)
<br />S. Test repast on 1) Air Infiltration Test. per FBC- TAS 202-94
<br />2) Uniform Static Air Pressure Test. per FBC, TAS 20294
<br />3) Water Resistance Test, per FBC, TAS 202-94.
<br />4) Large Missile Impact Test per FBC, TAS 20194
<br />5) Cyclic Wind Pressure Loadingper FBC, TAS 203-94
<br />6) Forced El11ry Test, pet FBC, TAS 202-94
<br />along with marked -up drawings and installation diagram of vinyl diding glass door, prepared
<br />by Fenestration Testing Lab. Inc.. Test Report No. FTL W49, dated 1106?15, signed and
<br />sealed by Idalmis Ortega, P. E. (rest report revised on 12/04.45 and 0241116)
<br />6. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test. per FBC. TAS 202-94
<br />3) Water Resistance Test. per FBC, TAS 20294.
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 20394
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door' prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FTL 8552_ dated 12104115, signed and
<br />sealed by Idalmis Ortega, P. E_ (Test report revised on 02115,2016)
<br />7. Test report on 1) Uniform Stag Air- Pressure Test, per FBC, TAS202-94
<br />2) Large Missile Impact Test per FBC, TAS 201-94
<br />3) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FTL 6638 (samples A-1 thru A-22), dated
<br />I I!19,40, signed and sealed by Jorge A. Causo, P. E. (Subniftted underJV0.4 Na 11-
<br />010 0,t)
<br />8 Test report on 1) Air Infiltration Test per FBC_ TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC. TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94
<br />4) Large Missile Impact rest per FBC TAS 201-94
<br />5) Cyclic Wind Pmaue Loading per FBC, TAS 203-94
<br />6) Forced Entry Test, per FBC. TAS 202-94
<br />along with matkedup drawings and installation diagram of amyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FTL 6.137 (samples A-1 thru A-5), dated
<br />lb06110, signed and sealed by Jorge A. Causo, P. E. (Submitt'ed under V0.4 A'o. ll-
<br />010 09)
<br />C. C ALCUTLATIONS
<br />1 _ Anchor verification calculations and structural analysis, complying with FBC-2014,
<br />prepared by PGT dated 1109-15and last mused on 01115/16. sighed and sealed by
<br />Anthony Miller, P.E. (Submtilied under.N0.4 Xe. 15-1210. 01).
<br />2. Glazing; comes with ASTME-1300-09_
<br />Ishoq L Chanda, P.E.
<br />Product Control Uait Supervisor
<br />NOA No. 21-01.105.03
<br />Expiration Date: April 14, 2026
<br />Approval Date: MarcL 16, 2021
<br />E -2
<br />PGT Ludastries, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUTBIEffU
<br />3. New Evidence Surbi nitted
<br />A. DRA11°INGS
<br />1. Drawing No. DID-5570.0 Rev B, titled "Vinyl Sliding Glass DoorNOA (I.M)" sheets 1
<br />through 21 of 21, prepared by manufacturer, dated 10*5;15 and last rm-md on 02"01'.2, L
<br />signed and sealed by A. Lynn Miller, P.E_
<br />Note: This revision consists replacement of same emsting installation screw with flat head.
<br />B. TESTS
<br />1. None-
<br />C, C LCELATTON,S
<br />1- None_
<br />D. QUTALITF ASSUR.XNCE
<br />1. Miami -Dade Department of Regulatory and Economic Resources (REX).
<br />E, M4,TERL4I. CERTIFICATIONS
<br />1. Notice of Acceptance No.19-0305.02 issued toKararati America. Inc. for their
<br />"Trosifolg Ultraclear, Clear, and Color PVB Glass Interlacers'. expiring on 07/08124_
<br />2. Notice of Acceptance No.17-080&02 issued to Kuraray America, Inc. for their
<br />"Sent]-rGlast (Clear- and Wltite) Glass Interlatcers % mptiltting on 07104,Q3_
<br />3_ Notice. of Acceptance No.19-1106.10 issued to Vision Extrusions Limited for th& -Brown
<br />Coated (Painted or Laminated) White Rigid PVC Exterior Extrusions for Windows
<br />and Doors", expiring on 09130124.
<br />4. Notice of Acceptance No.19-1106.11 issued to Vision Extrusions Limited for their series
<br />"VE 1000 Tan 202 and lighter shades (1tion-1i7r#e) Rigid Cellular PVC Exterior
<br />Extrusions for Windows and Doors", expiring on 12/29121.
<br />F. STATEMENTS
<br />L Statement letter of conformance to FBC 7`6 Edition (2020), dated 02/01,21. issued by
<br />manufacturer, signed and sealed by Anthony Lynn Miller. P-E.
<br />2. Private Labeling Agreement dated 03.09,21 between PGT Industries, Inc. and CGI
<br />Windows and Doors Inc.. signed by Dean M. Ruark, P.E., V.P. Engineering, on behalf of
<br />both companies.
<br />G. OTHERS
<br />L This NOA revises & renews NO.A## 20-0429.0: (PLA w/CGT), expiring 04r141216.
<br />2. The current associated PL4 CGI file #21-0205.01, expiring 0444,26.
<br />E -6
<br />Ishaq L Chaada, Y.E.
<br />Product Control Unit Supervisor
<br />NOA No. 21-0205.03
<br />Expiration Dare: April14,2016
<br />Approval Date: Marti 25,1.1.021
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUTBMITT ED
<br />D. QUTALTI7' ASSUTRANCE
<br />1. Miami Dade Department of Regulatory and Economic Resources (RER)_
<br />E. MATERLAL CERTIFICATIONS
<br />1. Notice of Acceptance No.1."529.14 issued to Vision Extrusion Limited for their
<br />"WIdie Rigid PVC Exterior Extrusions for'%Indows and Donors", dated 0813?'15.
<br />expiring on 09. 30/19.
<br />2. Notice of Acceptance No.16-0920.09 issued to Vision Extrusion. Limited for their -17E
<br />1000 Tan 202 and lighter :Shades (Non-N%lite) Rigid PVC Exterior Extrusions for
<br />Windows and Doors", dated 11-08/16, expiring on 12129/21.
<br />3. Notice of Acceptance No.1."528.15 issued to Vision Extrusion Limited for their
<br />"Brown Coated (Painted or Laminated) White Rigid PVC Exterior Extrusions for
<br />Windows and Doors", dated 08113i15. expuing on 09,130.(19.
<br />4. Notice of Acceptance No.16-0712.02 issued to ENERGI Fenestration Solutions USA,
<br />Inc. for their TAN 3040 and Lighter Shades (Non-1lhite) Rigel PVC Exterior
<br />Extrusions for Windows and Doors" dated 0911546_ expiring on 02*4121.
<br />5. Notice of Acceptance No-16-0712.04 issued to ENERGI Fenestration Solutims USA,
<br />Inc. for their "Bronze and Lighter Shades of Cap Coated Rigid PVC Exterior
<br />Extrusions for Windows and Doors" dated 09l15116, expiring on 04,116,20.
<br />6.. Notice of Acceptance No. 16-0712.03 issued to ENERGI Fenestration Solutions USA,
<br />Inc. for their"White Rigid PVC Exterior Extrtlsi(ons for Windows and Doors" dated
<br />08A0ell7, Mooring on 02,28118.
<br />7. Test reports No(s). 10- 2-792(A), 10-06-140527. 535753-09. per ASTM E-84-
<br />ASTND 1929 and ASTMD-635. issued by EXOVA to Vision Extrusion for cellulosic
<br />composite material.
<br />(Subntined tinder Ar0.4 1'o.11-0107.04)
<br />8. Notice of Acceptance No.14-0916.11 issues! to Kuraray America., Inc. for their
<br />.`Senn --Glass (Clear and White) Interlaces". expiring on OP04118.
<br />9. Notice of Acceptance No.16-1117.01 issued to Kwaray 4mecica, Inc. for their
<br />..Trosifolt U>ttraclear. Clear and Color PN B Interla;t rs expiring on 07{0849.
<br />F. STATEMENTS
<br />1. Statement letter of conformance with FBC-StbEdition (2014) and FBC-6ftEdition
<br />(2017), issued by manurfachirer, dated 08114 T signed & sealed by Lyra Miller, P.E_
<br />2. Statement letter of no financial interest, dated 04-118l17, issued by manufacturer, signed
<br />& sealed by Lyon Millar. PF_
<br />3. Letter of lab compliance} part of the above test reports.
<br />4. RER Test Proposal No.17-0397. dated 05,05117, signed by Ishaq Chanda. P.E_
<br />G. OTHER
<br />1. Notice of Acceptance No.1--1210.01, issued to PGT Indus, for their Series
<br />"557012770" Vinyl S>idfmg Glass Door (Reinforced) -L.M.I.. expiring on 0444.,21-
<br />tf
<br />hhaq L Choada, PF.
<br />Product Control Unit Saperriror
<br />NOA No. 21-020rA3
<br />Expiration Date: April 14, .026
<br />Approval Date: 'March 25, 2021
<br />E -3
<br />4--0
<br />N
<br />N
<br />to
<br />(D
<br />a..�
<br />C�
<br />L
<br />a
<br />O
<br />Q
<br />�
<br />0
<br />2
<br />.�
<br />U
<br />(L
<br />'0
<br />O
<br />cu
<br />rn
<br />_a
<br />c
<br />O
<br />L.L.
<br />An
<br />Cn
<br />E
<br />L
<br />O
<br />CU
<br />L
<br />1-
<br />t�
<br />Cn
<br />i.7_
<br />�C
<br />W
<br />J
<br /><'r3
<br />rr,�Ho
<br />CD
<br />-
<br />�
<br />T E c.
<br />CY 10
<br />-,-..
<br />QD
<br />CU
<br />co
<br />CU
<br />0
<br />CDL
<br />Q
<br />U
<br />O
<br />Q_
<br />CU
<br />Ca
<br />CU
<br />Q
<br />w
<br />z
<br />Z J
<br />Q
<br />J
<br />d
<br />SHEET NO.
<br />PA 1 A
<br />March 6, 2023
<br />
|