|
MIAMI NUA,a-DAME Comm
<br />PRODUCTCaNTROL S1:CnON
<br />11905 SW 26 9 crust, Pam 302
<br />DEPARnAE'NT OF REGULATORY AND EC QNOWC RESOURCES WM) M3amt. Plourde 33175-2474
<br />BOARD AND CODE AD&UNISTRATION DIVISION T (T$6) 3 L5-2590 F (M) 315-25"
<br />NOTICE OF ACCEPT kNCE (NOA) �►�* .�+aaet.�let.■�.�
<br />PGT Indmstries, Inc.
<br />1070 Technology Drive,
<br />North Venice, FL 34275
<br />SCOPE:
<br />This NOA is being issued under the applicable rules and regulations governing the use of conshmictionmaterials. The
<br />documentation submitted has been reviewed and accepted by Miami -Dade CouttyRER -Product Control Section to
<br />be used in Miami. Dade County and other ucas wham allowedby the Authority Ha -mg Juris, Lion (AM).
<br />'This NOA shall not be valid afar the expration date statedbelaw_ The Miami -Dade County Product Control Sections
<br />(1n Miami Dade County) an&orthe AHT (in areasolher thanMiami Dade County) reserve the right to have this
<br />product or material tested for quality a3snranceputposes. If this product or material fails to pedotm in the accepted
<br />manner, the mamx&cturer will incur the expense of suchtestiag and the AHJmay immediately revoke- mo dify, or
<br />suspend the use of such product or material within their jurisdiction. RER reserves the rat to revoke this
<br />acceptara:e, if it is determined byMrami-Dade County Product Control Section that this product or material fails to
<br />meei time requirements of the applicable building code -
<br />This product is approved as described herein and has been designed to comply with the Florida Building Code_
<br />including the High Velocity Hurricane Zone.
<br />DESCRIPTION: Series "557ti12 770" Vinyl Sliding Gla ss Door (Reinforced) Rhro 900 & 13.50 corners-L.M.I.
<br />APPROVAL DOCU AW T: Drawing No. MD-5570.0 Rev B, titled "Vinyl Sliding Glass Door NOA (LM)", sheets
<br />1 through 21 of 21, prepared by manufacturer. dated l0105115 and last revised on O''1'01121. signed and sealed by
<br />A. Lynn Miller, P.E., bearing the Miami -Dade CountyProductContcol Revision stance with the Notice of
<br />Acceptance number and expustion date by the Miami -Dade County Product Control Section
<br />MISSILE IMPACT RA1r G: Large and Small Nksile Impact Resistant
<br />Limitations:
<br />1. See table 1 (sheet 7) and table 2 (sheet �) forapplicable SGD unit sizes, design pressures, reinforcements types.
<br />glass types, sill riser (see tables B-1 & B-2 sheets 7-8) and anchor layout sheets requirements in 1 I thou 16.
<br />Rigid White PVC, Tan (Non -white) Rigid PVC and Brower coated (Painted or laminated) white Rigid PVC to be
<br />labeled per referenced NOA's requirements-
<br />3- Egress operable doors must catnmply with min clear width or hex&t per FBC requirement. as applicable.
<br />4. Pocket walls under separate approval, to be reviewed by Building official
<br />LABELING: Each unit shalt bear a pemu neat label with the masaictunes name or logo, city, state and series and
<br />following statement: "Miami -Dade County Product Control Approved°.nosed herein
<br />RE-'ti'E�t -AL of this NOA shall be considered after a revev al application has been filed and there has beenno
<br />change in the applicable building code negatively affecting the perforce ofthis product
<br />TERIIL\ ATION of this NOA wilt occur aver the expiration date or if there has been a revision or change in the
<br />materials, use, and<or m amik cture of the product or process. Misuse of this NOA as an endorsement of any product,
<br />for sales. advertising or any other-purposes:shall automatic ally terminate this NOA. Failure to complywith any
<br />section of this NOA shall be cause far termination and removal ofNOA_
<br />A`DVERTISE_MENT: The N OA number preceded b y the words Miami -Dade County Florida, and followed by the
<br />expiration date maybe displayed inadvertising liMature. If anyportion of the NOAis displayed. then it shall be
<br />done in its entirety.
<br />IN SPEMON: A copy of this entire NOA shalt beprovided to the user byte maindacmuter or its diwfttors and
<br />shall be available for inspection at thejob site at the request of the Building Official.
<br />This NOA revises & renews NOA 420-04'_9.05 and consists of thispage 1 and evidence pages E- 1. E-2. E-3. E-4.
<br />E-5 & E-6 as well as approval document mentioned above -
<br />The submitted documentation was reviewed by Ishaq L Chanda. P.E.
<br />NOA No. 21-020-4.03
<br />Expiration Datet April 14, 2026
<br />Approval Date:March 23, 2021
<br />Pa6e 1
<br />PGT Industries. Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBIffI'TED
<br />2. Evidence Submitted under previous submittal
<br />A. DRAWINGS
<br />1. Drawing No. MD-5570.0 Rev-B. titled `Vinyl Sliding. Glass Door NOA (LM)" sheets
<br />1 through 21 of 21, prepared by manufacturer, dated 10.'05115 and last revised on
<br />04,122120, signed and sealed by A_ Lynn Miller. PE.
<br />B. TESTS
<br />I. Test reports on: 1) Air Infiltration Test, per FBC. TAS 202-94
<br />2) Uniform Static Air Pressure Test, Loading per FBC. TAS 202-94
<br />3) Water Resistance Test, per FBC. TAS 202-94
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loadingper FBC, TAS 203 94
<br />along with masked up drawings and installation diagram of all PGT industries, Inc.
<br />representative units listed below and tested to qualify Dowsd 791 and Dowsii 983 silicones,
<br />prepared by Fenestration Testing Laboratory, Inc.. Test Reports No.:
<br />FTL-7897, PGT PW5520 PVC Fixed Window (unit 6 in proposal), dated 09103? 14
<br />FTL-20-2107.1, PGT SGD780 Aluminum Sliding Glass Door (unit 7 in proposal) FTL-20-
<br />2107..2, PGT CA740 Altmt Outswing C.aserinent Window (unit 8 in proposal) FTL-20-
<br />2107.3, PGT PW7620A Ahma nurn Faced Window (unit 9 in proposal) and FTL-20-2107.4.
<br />PGT PW7620A Aluminum Fixed Window (unit 10 in proposal) dated 07113?20, all signed
<br />and sealed by Idalmis Ortega. P.E_
<br />C. CALCULATIONS
<br />1. Anchor verification calculations and structural analysis, complying with FBC 76
<br />Edition (2020)_ dated 04122/2 , prepared by manufactuier, signed and sealed by
<br />Anthony Lynn Miller, F.E.
<br />2. Glazing complies with ASTM E 1300-04, -09, 42 and -16.
<br />D. QUALM ASSURANCE
<br />Mom -Davie Department of Regulatory .and Economic Resources (RER).
<br />E. M. ATERLXL CERTIFICATIONS
<br />1. Notice of Acceptance No.19-0305.02 issued to Kw-aray America, Inc. for their
<br />"Trosifott, U lttaciear, Clear, and Color PVB Glass Interiayers expiring on
<br />OT08124.
<br />2. Notice of Acceptance No.17-0803.02 issued toKuraray America, Inc. for their
<br />"SentryGlast- (Clear and X%bre) Glass Interlayels", expiring on 07,N123.
<br />3- Notice of Acceptance No. 18-1106.10 issued to Vision Extrusions Limited for their
<br />"Brown Coated (Painted or Laminated) White Rigid PVC Exterior Extrusions
<br />for Windows and Doors". expiring on 09130t24.
<br />J. Notice of Acceptance No. 1&1106.11 issued to Vision Extrusions Limited for their
<br />series "VE 1000 Tan 202 and lighter shades (.Non -White) Rigid Cellular PVC
<br />Exterior Extrusions for N%Indow+rs and Doors", expiring on 11,2921.
<br />, r
<br />1 `1-7
<br />Ishaq L Clkanda, P.E.
<br />Product Control malt Supervisor
<br />NOA No. 21-0203.03
<br />ExpirationDate: April 14, 2026
<br />Approval Date: lliardh U5, 2021
<br />E -4
<br />PGT Industries, Inc.
<br />NOTICE OF ACC'EPT-AINC'E: EVIDENCE SUBMITTED
<br />1. Evidence submitted under previous VOA
<br />A. DRAWINGS
<br />1. Manufacturees die drawings and sections.
<br />(Submitted under 10A No. 11-0107. 04)
<br />2- Drawing No. 3D-5570.0, titled "Vinyl Sliding Glass Door NOA W1, streets 1
<br />through 11 of 21. prepared by manufacttra, dated la.D5115, with revision A dated
<br />04/05-17, signed and sealed by A. Lynn Miller, P.E.
<br />B. TESTS
<br />1 _ Test report on 1) Uniform Static Air Pressure Test, per FBC. TAS 202-94
<br />2) Large Missile Impact Test per FBC, TAS 201-94
<br />3) Cyclic Wind Pressure Loadingper FBC: TAS 203-94
<br />along with manned -up drawings and installation diagram. of Znnyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc, Test Report No. FTL 9717, dated 12/07.15, signed and
<br />sealed by Idaimis Ortega. P. E. (Test report revised on 02115A 6 and 02,24116)
<br />2. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Uniform Static ,Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance Test, per FBC. TAS 202-94.
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />g) Cycles Wind Pressure Loading per FBC. TA.S 203--94
<br />6) Famed Entry Test, per FBC, TAS 202-94
<br />along withmarked-up drawings and installation diagram ofvinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc.. Test Report No. FTL 8546, dated I IV6.115_ signed and
<br />sealed by Idalmis Ortega, P. E. (rest report revised on 01.0446 and 02I1/201.6)
<br />3. Test report on 1) Air Inf Utration Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance Test. per FBC, TAS 20294
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />S) Cyclic Wind Presstnre Loadingper FBC, TAS 203-94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along with marked -up drawings and installation diagram ofvmyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FTL 8547, dated L2,104115, signed and
<br />sealed by Idalnus Ortega, P. E. (rest report revised on 011546)
<br />4. Test report an 1) Air Infiltration Test, per FBC, TAS 2(r-94
<br />2) Uniform Static Air Pressure Test: per FBC_ TAS 202-94
<br />3) Water Resistance Test. per FBC, TAS 202-94
<br />4) Large MkWe Impaet Test per FBC. TAS 201-94
<br />5) Cyclic Virind Pressure Loadingper FBC. TAS 203-94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />AM with marked -up drawings and installation diagram of vinyl sliding glass door- prepared
<br />by Fenestration Testing Lab. Inc., Test Report No. FTL 8548, dated 12,,04115, signed and
<br />sealed by Idalmis Ortega, P_ E. (Test report revised on 01 64,4 6 and 0211146).
<br />•r
<br />Ishaq I. C1mads. P.E.
<br />Product Control Emit Supervisor
<br />NOA No. 21-0205.03
<br />Expiration Datet April 14, 2026
<br />Approval Date. Mardi25, 2021
<br />E -1
<br />CGI Windows and Doors, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
<br />E. MATERL4L CERTIFICATIONS (continue)
<br />5. Quanex Part Super Spacer Standard complying with ASTNf C518 lhemlal Conductivity
<br />0-881 BTU W hr.-ft---F, ASTM F 1249 W'1rIR Pass= ASTM D3985 Oxygen -Pass= ASIM E
<br />�190I.C. Durability Ito fog -Pass. (Subntitird under preslons N0.-1 Ao.15-0409.05)
<br />6. Quanex Part Durase complying with ASTM C518 Thnemnlal Conductivity 2.22 BTU -in,'
<br />br. ft=-°F. ASW F 1249 WVTR Pass, ASTM D 1434 Argon Pete -Pass, ASTM E
<br />2199 I.G. Durability No Fog, ASTNi E 546 Dew Point Development -20°F in 48 his.
<br />(Subni robed under NOA X6.15-0400.05).
<br />7. Vision Extrusions, Ltd. Parts complying with PVC-A.ANIA 303-13, Voluntary Specification
<br />for Rigid Polyvinyl Chloride (PVC) Exterior Profiles for Vision Extrusions, Ltd. VEX-1 by
<br />AAMA Fenestration Exterior Profile Certification Program. (Subinived under X0.4 Xo. 15-
<br />0409.05)
<br />8_ Vision Extrusions, Ltd. Parts complying with PVCAANLA 303-13_
<br />(-'9ubm fitted render A`0 4 JVo. l S-a 09. 05)
<br />9. PVCAANIA 303-13, Voluntary Specificatim for Rigid Polyvvinyl Chloride (PVC) Exterior
<br />Profiles for Vision Extrusions. Ltd.-VEX-1 by AAMA Fenestration Exterior Profile
<br />Certification Program..
<br />10_ Notice of Acceptance No. 18-1217.14 issued to Eat Fenestration Solution, USA. Inc- for
<br />their ``Ian 3040 & tight Shade (non -white) X%Id a Rigid PVC Exterior Extrusions for
<br />Window& and Doors". expiring on 02;104121.
<br />11. Notice of Acceptance No. 1&4122.02 issued to Enerp Fenestration Solution, USA- Inc, for
<br />their Semties `%li to Rigid PNT Exterior Extrusions for Windows and Doors', expiring on
<br />02.2 23..
<br />1?. Notice of Acceptance No_ 20-0203.03 issued to Energi Fenestration Solution, USA, Inc. for
<br />their `Bronze & light shade cap coated White Rid PVC Exterior Extrusions for
<br />Windows and Doors", expiring on 04,116r25.
<br />F. ST ATE-AIENTS
<br />1. Statement letter of conformance to FBC 70a Edition (2020), dates! 04,2 3.20. issued by
<br />manuf ictim. signed and sealed by Anthony Lynn Miller, P.E.
<br />2. Statement letter of into financial interest and of independent. issued by mnammlmfacturer. dated
<br />04.118)20, signed and sealed by Anthony Lynn Miller, P E.
<br />3, Private Labeling Agreement document beta=em PGT. dated 03f30115 and signed by all
<br />involved parties
<br />G. OTHERS
<br />1. This NOA revises NOA# 17-0420.06 (PVT w?CGI) and updates to FBC2020 (in` Edition),
<br />expiring 04121 P? I -
<br />2- RER Test proposals #19-1155 dated 0111020 approved by IshagI_ Chanda,PE_ expiring
<br />04114,221 _
<br />E -5
<br />t
<br />lshaq L Cicada, P.E.
<br />Product Control Uok Supervisor
<br />'� flA No. 21-02t)5.03
<br />Expiration Date: April14,2016
<br />Approval Date: March 25, 2021
<br />PGT Lubstries. inc..
<br />NOTICE OF ACCEPTANCE: EVIDENCESUBMITTED
<br />B. TESTS (continued)
<br />5. Test report on 1) Air Infiltration. Test, per FBC. TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC. TAS 202-94
<br />3) Water Resistance Test, per FBC. TAS 202-94.
<br />4) Large Missile Impact Test per FBC. TAS 201-94
<br />5) Cyclic Wind Pressure Loadingper FBC, TAS 203-94
<br />6) Forced Entry Test, per FBC. TAS 202-94
<br />along with marked up drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FTL 8549, dated 11-0615, signed and
<br />sealed by Idalmis Ortega, P. E_ (rest report revised on 12104?15 and 014 V16)
<br />6. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test. per FBC. TAS 202-94
<br />3) Water Resistance Test. per FBC, TAS 202-94.
<br />4) Large Missile Impact Test per FBC, TAS 201-N
<br />5) Cyclic Wind Pressure Loadingper FBC, TAS 203-94
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc.. Test Report No. FTL 8552, dated 12r04115. signed and
<br />sealed by ,Idalmus Ortega, P. E_ (Test report revised on 02115,2016)
<br />7. Test report on 1) Uniform Static Air Pressure Test. per FBC. TAS 202-94
<br />2) Large Missile Impact Test per FBC, TAS 201-94
<br />3) Cyclic Wind Pressure Loadingper FBC_ TAS 203-94
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab. Inc.. Test Report No. FTL 6638 (samples A-1 thru A-22). dated
<br />I I119110. signed and sealed by Jorge A. Causo, P. E. (S'ubmbled underNt2 Arc II-
<br />010,704)
<br />8 Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94.
<br />4) Large Missile Impact Test per FBC, TAS 201-04
<br />5) Cyclic Wind Pressure Loadingper FBC, TAS 203-94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along with narked -up drawings and ingallation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No_ FTL 6337 (samples A -I thou A-5), dated.
<br />12106110, signed and sealed by Jorge A. Cam. P. E. (Submitted under NOA Xo.11-
<br />0107, 09)
<br />C. CALCULATIONS
<br />i . Anchor verification calculations and structural analysis, complying with FBC-2014,
<br />prepared by PGT, dated 11,09 `15and last rmised on 0211S 16, signed and sealed by
<br />AnthonyLMiller, P.E. (Sit binirted underNO.41►e.151210.01).
<br />2. Glazing complies with ASTNE-1300-09. , y
<br />7
<br />Ishaq L Chanda, P.E.
<br />Product Control gait Supervisor
<br />NOA No, 21-0265.03
<br />Expiration Date: April14,2026
<br />Approval Date: March 25, 2021
<br />E -2
<br />PGT Industries, Inc.
<br />NOTICT OF ACCEPT.AINCE: EVIDENCE SUB3►IITTED
<br />3. New Evidence Submitted
<br />A. DRAWINGS
<br />1. Drawimag No_ AID-5570.0 Rev B. titled "Vinyl Sliding Glass Door NOA (LNIT, sheets 1
<br />through 21 of 2l. prepared by manufacturer. dated 10,105.45 and last revised on 02)O 21.
<br />signed and sealed by A_ Lynn Miller, P.E.
<br />Note: This revision consists replacement of same existing installation screw with flat head-
<br />B. TESTS
<br />1. Noire.
<br />C. CALCULATIONS
<br />1_ None.
<br />D. QUALITY ASSURANCE
<br />1. Miami -Dade Department of Regulatory and Economic Resources (RER).
<br />E, Xi.ATERIAL CERTIFICATIONS.
<br />1. Notice: of Acceptance No.19-0305.02 issued toKurara` America, Inc. for their
<br />"Trosifollc U-ltraclear, Clear, and Color PVB Glass Interlarers", expiring on 07,080-4.
<br />2. Notice of Acceptance No.17-080&02 issued to Sunray America, Inc. for their
<br />`tSentlyGla4 (Clear and 1171iite) Glass Interlayers"_ expiring on 03104,n3.
<br />3_ Notice of Acceptance; No.18-1106.10 issued to Vision Extrusions Limnited for their " Brown
<br />Coated (Painted or Laminated) White Rigid PVC Exterior Extrusions for Windows
<br />and Doors". a q*ing on 09130124.
<br />4 Notice ofAcceptance No.18-1106.11 issued to Vision Extrusions Limited for their series
<br />"VE 1000 Tan 202 and lighter shades (Non-W7rhte) Rigid Cellular PVC Exterior
<br />Extrusions for Windows and Doors", expiring on 12/29?21.
<br />F. STATE-N ENTS
<br />1_ Statement letter of conformance to FBC 7a' Edition (2020), dated 02101,21. issued by
<br />mnanufacturet. signed and sealed by Anthony Lynn Miller, P.E.
<br />2_ Private Labeling Agreement dated 0310&21 between PGT Industries, Inc. and CGI
<br />Wimldows and Doors Inc., signed by Dean M. Ruask, P.E.. V.P. Engineering. on behalf of
<br />both conVainies.
<br />G. OTHERS
<br />I_ This NOA revises & renews NOA# 20-0429.0.4 (PLA w1CGI), expiring 04.11+ 26.
<br />I. The current associated PLA CGI file #21-0205.01, expiring 04i 1+26.
<br />E -6
<br />��► �, C_�n�t,.
<br />1
<br />Ishaq I. Chanda, P.E.
<br />Product Coarsoi Usk Supervisor
<br />NOA No. 21-0205.03
<br />Expiration Date: April 14, 2026
<br />Approval Dace; March 26. M0.1
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUB1UTTED
<br />D. QUALrr ASSUTRANCE
<br />1. Mimi Dade Department of Regulatory and Economic Resources (RER)_
<br />E. MATERIAL CERTIFICATIONS
<br />1. Notice ofAcceptance No. U"528.14 issued to Vision Extrusion Limited for their
<br />"Wldte Rigid PVC Exterior Extrusions for Windows and Doors", dated 0$113.r'15.
<br />expiring on 0913&19.
<br />2. Notice of Acceptance No.16-0920,08 issued to Vision Extrusion Limited for their ``VE
<br />1000 Tan 202 and lighter Shades (1V on-Midte) Rigid PVC Exterior Extrusions for
<br />Windows and. Doors", dated 12108/16. expiring on 12129,,21.
<br />3. Notice of Acceptance No.15-0528,15 issued to Vision Extrusion Limited for their
<br />"Brown Coated (Painted or Laminated) White Rigid PVC Exterior Extrusions for
<br />W-mdows and Doors". dated 08113/15. expiring on 09130119.
<br />4. Notice of Acceptance No.16-0712.02 issued to ENERGI Fenestration Solutions USA,
<br />Inc. for their "T:4.N3040 and Lighter Shades (Non -White) Rigid PVC Exterior
<br />Emu-trsions for Windows and Doors" dated 09115116, expiring on 02' 04121.
<br />5. Notice of Acceptance No-16-0712.04 issued to ENERGI Fenestration Solutions USA.
<br />Inc. for their -Bronze and Lighter Shades of Cap Coated Rigid PYC Exterior
<br />Extl•tusions for Windows and Doors' dated 0935116, expiring on 0411620.
<br />6. Notice of Acceptance No.16-0712.03 issued to ENERGI Fenestration Solutes USA,
<br />Inc_ for their ' NMte Rigid PVC Exterior Extrusions for Windows and Doors" dated
<br />08110117, expiring on 0202&18.
<br />7. Test reports No(s). 10-002-792(A), 10-06-M052T 535753-09. per ASTh1E-84,
<br />ASTND 1929 and ASTMD-635. issued by EXOVA to yksion Extrusion for cellulosic
<br />composite material
<br />(Su bntNed under i10.4 No. 11-0107. 4)
<br />8. Notice of Acceptance No. 14-0916. 11 issued to Ktuaray America., Inc. for their
<br />"Sentry( lasg (Clear and N%I*) Interla}-er", expiring on 07iO4/1 S.
<br />9. Notice of Acceptance No.16-1117.01 issued to Kuratay America. Inc. for their
<br />Trosifoll Ultraciear. Clear and Color PVB Inter•layers expiring on 07r'08119.
<br />F. ST ATE?41Ei4TS
<br />1_ Statement letter ofconfonnance with FBC-5 th Edition (2014) and FBC-6mEdidon
<br />(2017), issued by manufacturer, dated 08/14117, signed & seakd by Lynn Nfillm PE _
<br />2_ Stalemnent letter of no financial interest, dated "I& 17. issued by manufacturer, signed
<br />& sealed by Lynn Miller, P.E.
<br />3. Letter of lab compliance, part of the above test reports.
<br />4. RER Test Pwposal No.17-0387. dated 05105117, signed by Ishaq Chanda, P.E.
<br />G. OTHER
<br />1. Notice of Acceptance No. IS-1210,01, issued to PGT Industries, for their Series
<br />"557012770" Vinyl Sliding Glass Door (Reinforced) - L.MJ. ". expiring on 04/14211-
<br />E -3
<br />} Ishaq L Chanda, P.E.
<br />Product Control unit Supervisor
<br />NOA No. 21-020+.03
<br />Expiration Date: Apri114, 2026
<br />Approval Date: Rtarch !.4,2021
<br />N
<br />N
<br />Cn
<br />N
<br />-Cu
<br />O�
<br />N
<br />C
<br />c
<br />2
<br />s`
<br />cD
<br />Cn
<br />aO
<br />a
<br />O
<br />CU
<br />U_
<br />O
<br />.n
<br />Cn
<br />-a
<br />�
<br />0
<br />O
<br />Q
<br />Z
<br />Z
<br />W
<br />J
<br />err
<br />0
<br />o
<br />N
<br />d 9
<br />c W
<br />$ o
<br />cry
<br />0
<br />c
<br />m k
<br />Z
<br />,_ o , t
<br />N !O
<br />m e
<br />d E i
<br />►- N A
<br />T �
<br />a
<br />C
<br />m c+
<br />V
<br />6
<br />h
<br />E
<br />CD
<br />CU
<br />0
<br />>
<br />L
<br />CL
<br />0
<br />lam.
<br />Q
<br />L
<br />U
<br />O
<br />L
<br />CL
<br />CU
<br />�+
<br />CU
<br />CU
<br />m
<br />Q
<br />-0
<br />F-
<br />F-
<br />0
<br />L
<br />CU
<br />w
<br />z J
<br />Z
<br />Q
<br />J
<br />a_
<br />SHEET NO.
<br />PA 1 A
<br />March 6, 2023
<br />
|