|
EXTERIOR RESEARCH & DESIGN, LLC.
<br />Certificate of Authorization #9503
<br />353 CHRISTIAN STREET, UNIT #13
<br />TRINITY ERD OXFORD, CT 06478
<br />PHONE: (203) 262-9245
<br />FAX: (203) 262-9243
<br />EVALUATION REPORT
<br />GAF Evaluation Report 01506.01.08-118
<br />1361 Alps Road, Building 7-3 FL10124-R6
<br />Wayne,NJ 07470 Date of Issuance: 01/03/2008
<br />Revision 8: 02/06/2012
<br />SCOPE:
<br />This Evaluation Report is issued under Rule 9N-3 and the applicable rules and regulations governing
<br />the use of construction materials in the State of Florida. The documentation submitted has been
<br />reviewed by Robert Nieminen, P.E. for use of the product under the Florida Building Code and
<br />Florida Building Code, Residential Volume. The products described herein have been designed to
<br />comply with the 2010 Florida Building Code sections noted herein,
<br />DESCRIPTION: GAF Asphalt Roof Shingles
<br />LABELING: Each unit shall bear labeling in accordance with the requirements the Accredited Quality
<br />Assurance Agency noted herein.
<br />CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s)
<br />changes, the referenced Quality Assurance documentation changes, or provisions of the Code that
<br />relate to the product change. Acceptance of this Evaluation Report by the named client constitutes
<br />agreement to notify Robert Nieminen, P.E. if the product changes or the referenced Quality
<br />Assurance documentation changes. TrinityJERD requires a complete review of this Evaluation
<br />Report relative to updated Code requirements with each Code Cycle.
<br />ADVERTISEMENT: The Evaluation Report number preceded by the words "TrinitylERD Evaluated" may
<br />be displayed in advertising literature. If any portion of the Evaluation Report is displayed, then it
<br />shall be done in its entirety.
<br />INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by
<br />the manufacturer or its distributors and shall be available for inspection at the job site at the
<br />request of the Building Official.
<br />This Evaluation Report consists of pages 1 through 4.
<br />Prepared by: U�B4i ISirtA)i,
<br />The facsimile seal appearing was authorized
<br />O� ? by Robert Nieminen, P.E. on 02/06/2012
<br />%, s`•'�' ?•v,Z This does not serve as an electronically signed
<br />Robert J.M. Nieminen P.E. °'�,s;'`^~"' document. Signed, sealed hardcopies have been
<br />.rJd�s.�V .4'i*``� transmitted to the Product Approval Administrator and
<br />Florida Registration No. 59166, Florida DCA ANE1983 to the named client
<br />CERTIFICATION OF INDEPENDENCE:
<br />1. TrinitylERD does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or
<br />distributing products it evaluates.
<br />2. TrinitylERD is not owned, operated or controlled by any company manufacturing or distributing products it evaluates.
<br />3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing or distributing products for which
<br />the evaluation reports are being issued.
<br />4. Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
<br />product.
<br />11
<br />ROOFING SYSTEMS EVALUATION:
<br />1. SCOPE:
<br />Product Category:
<br />Roofing
<br />Sub -Category:
<br />Asphalt Shingles
<br />Compliance Statement: GAF Asphalt Roof Shingles, as produced by
<br />GAF, have demonstrated
<br />compliance with the
<br />following sections of the
<br />Florida Building Code and Florida Building Code,
<br />Residential Volume through testing in accordance
<br />with the following Standards. Compliance is subject
<br />to the Installation Requirements and Limitations J
<br />Conditions of Use set forth
<br />herein.
<br />2. STANDARDS:
<br />Section
<br />Property
<br />Standard
<br />Year
<br />1507.2.5, R905.2.4
<br />Physical Properties
<br />ASTM D3462
<br />2007
<br />1507.2.7.1, R905.2.6.1
<br />Wind Resistance
<br />ASTM D3161, Class F
<br />2006
<br />1507.2.7.1, R905.2.6.1
<br />Wind Resistance
<br />ASTM D7158, Class H
<br />2O07
<br />1507.2.7.1, R905.2.6.1
<br />Wind Resistance
<br />TAS 107
<br />1995
<br />3. REFERENCES:
<br />Enti
<br />Examination
<br />Reference
<br />Date
<br />GAF (PDM 1915)
<br />Letter of Equivalency
<br />Seal -A -Ridge Impact Resistant
<br />IR 01/13/2012
<br />PRI(TST 5878)
<br />ASTM D3462
<br />GAF-059-02-01
<br />09/02/2004
<br />PRI(TST 5878)
<br />ASTM D3462
<br />GAF-080-02-01
<br />05/25/2005
<br />UL (TST 1740)
<br />ASTM D3462
<br />93NK6295
<br />11/29/1993
<br />UL (TST 1740)
<br />ASTM D3462
<br />99NK43835
<br />01/12/2000
<br />UL (TST 1740)
<br />TAS 107
<br />94NK9632
<br />03/29/2000
<br />UL (TST 1740)
<br />ASTM D3462
<br />OINK06632
<br />02/02/2001
<br />UL (TST 1740)
<br />ASTM D3161, TAS 107
<br />01NK9226
<br />05/21/2001
<br />UL (TST 1740)
<br />ASTM D3161
<br />01NK37122
<br />12/18/2001
<br />UL (TST 1740)
<br />ASTM D3462
<br />01NK37122
<br />12/19/2001
<br />UL (TST 1740)
<br />ASTM D3161, TAS 107
<br />02NK12980
<br />04/10/2002
<br />UL (TST 1740)
<br />ASTM D3161, TAS 107
<br />02NK30871
<br />09/09/2002
<br />UL (TST 1740)
<br />ASTM D3161
<br />03CA5367
<br />03/11/2003
<br />UL (TST 1740)
<br />ASTM D3462
<br />03NK26444
<br />10/17/2003
<br />UL (TST 1740)
<br />ASTM D3462
<br />04NK13850
<br />06/07/2004
<br />UL (TST 1740)
<br />ASTM D3161
<br />04NK13850
<br />06/23/2004
<br />UL (TST 1740)
<br />ASTM D3161
<br />04NK30546
<br />03/10/2005
<br />UL (TST 1740)
<br />ASTM D3462
<br />04NK22009
<br />05/06/2005
<br />UL (TST 1740)
<br />ASTM D3161
<br />04NK22009
<br />05/09/2005
<br />UL (TST 1740)
<br />ASTM D3462
<br />OSNK27924
<br />02/10/2006
<br />UL (TST 1740)
<br />ASTM D3161
<br />05NK27924
<br />02/11/2006
<br />UL (TST 1740)
<br />ASTM D3161,D3462
<br />06CA18077
<br />06/05/2006
<br />UL (TST 1740)
<br />ASTM D3161,D3462
<br />06CA18074
<br />06/16/2006
<br />UL (TST 1740)
<br />ASTM D3161,D3462
<br />06CA35251
<br />10/18/2006
<br />UL (TST 1740)
<br />ASTM D3462
<br />06CA31603
<br />12/01/2006
<br />UL (TST 1740)
<br />ASTM D3161,D3462
<br />06CA41095
<br />12/27/2006
<br />UL (TST 1740)
<br />ASTM D3161
<br />07NK05228
<br />03/13/2007
<br />UL (TST 1740)
<br />ASTM D3161
<br />06CA31611
<br />04/04/2007
<br />UL(TST 1740)
<br />ASTM D3161
<br />06CA61148
<br />04/09/2007
<br />UL (TST 1740)
<br />ASTM D3161, D3462
<br />07CA31742
<br />11/08/2007
<br />UL (TST 1740)
<br />ASTM D3161, D7158, 03462
<br />08CA06100
<br />03/13/2008
<br />UL (TST 1740)
<br />ASTM D3161, D3462
<br />07CA55908
<br />04/01/2008
<br />UL (TST 1740)
<br />ASTM D3161,D3462
<br />09CA10592
<br />03/26/2009
<br />UL (TST 1740)
<br />ASTM D3161,D3462
<br />09CA06856
<br />05/15/2009
<br />UL (TST 1740)
<br />ASTM D3161, D7158, D3462
<br />09NK06647
<br />08/01/2009
<br />UL (TST 1740)
<br />ASTM D3161, D7158, D3462
<br />09CA27281
<br />08/27/2009
<br />UL (TST 1740)
<br />ASTM D3161, D7158, D3462
<br />IOCA35554
<br />03/05/2010
<br />UL (TST 1740)
<br />ASTM D3161, D7158, D3462
<br />10CA13686
<br />05/15/2010
<br />UL (TST 1740)
<br />ASTM D3462
<br />10CA07264
<br />05/27/2010
<br />UL (TST 1740)
<br />ASTM D3462
<br />10CA11953
<br />10/29/2010
<br />UL (TST 1740)
<br />ASTM D3161, D7158,D3462
<br />IONK11951
<br />10/30/2010
<br />UL (TST 1740)
<br />ASTM D3161, D7158,D3462
<br />1ONK12070
<br />11/04/2010
<br />UL (TST 1740)
<br />ASTM D3161, D7158, D3462
<br />08CA06100
<br />01/30/2010
<br />UL (TST 1740)
<br />ASTM D3161, D7158, D3462
<br />10CA53934
<br />03/31/2011
<br />UL (TST 1740)
<br />ASTM D3161, D7158,D3462
<br />11CA48924
<br />10/22/2011
<br />Exterior Research and Design, LLC.
<br />Evaluation
<br />Report 01506.01.08-118
<br />Certificate of Authorization #9503
<br />FL10124-116
<br />Revision 8: 02/06/2012
<br />Page 2 of 4
<br />UL (TST 1740) ASTM D3161, D7158, D3462 I1CA47919 12/03/2011
<br />UL (TST 1740) ASTM D3161, D7158, D3462 11CA48408 12/08/2011
<br />UL (TST 1740) ASTM D3161, D7158, D3462 11CA48725 12/09/2011
<br />UL (QUA 1743) Quality Control Inspection Report, File No. R21 05/17/2011
<br />UL (QUA 1743) Quality Control R3915 Current
<br />4. PRODUCT DESCRIPTION:
<br />4.1 Marquis WeatherMax, Royal Sovereign and Sentinel are a fiberglass reinforced, 3-tab asphalt
<br />roof shingles.
<br />4.2 Camelot, Camelot II / Camelot 30, Capstone, Country Mansion, Country Mansion II, Grand
<br />Canyon, Grand Sequoia, Grand Slate, Grand Slate II, Monaco, Timberline American Harvest,
<br />Timberline Armorshield II, Timberline Natural Shadow, Timberline Natural Shadow Arctic White,
<br />Timberline HD / Timberline Prestique 30, Timberline Prestique 40 / Timberline Cool Series,
<br />Timberline Ultra HD / Timberline Prestique Lifetime, Timberline Majestic / Timberline Majestic 30
<br />and Woodland are fiberglass reinforced, laminated asphalt roof shingles.
<br />4.3 Slateline is a fiberglass reinforced, 5-tab asphalt roof shingle.
<br />4.4 Seal -A -Ridge, Seal -A -Ridge Armorshield, Seal -A -Ridge Impact Resistant IR, Ridglass 8, Ridglass
<br />10, Ridglass 12 and Timbertex Hip and Ridge are fiberglass reinforced, hip and ridge asphalt
<br />roof shingles.
<br />4.5 ProStart Starter Strip Shingles and WeatherBlocker Starter Strip Shingles are a starter strips for
<br />asphalt roof shingles.
<br />5. LIMITATIONS:
<br />5.1 This Evaluation Report is not for use in the HVHZ.
<br />5.2 Fire Classification is not part of this Evaluation Report; refer to current Approved Roofing
<br />Materials Directory for fire ratings of this product.
<br />5.3 Wind Classification:
<br />5.3.1 All GAF shingles noted herein are Classified in accordance with FBC Tables 1507.2.7.1 and
<br />R905.2.6.1 to ASTM D3161, Class F and/or ASTM D7158, Class H, indicating the shingles are
<br />acceptable for us in all wind zones up to Vaed = 150 mph (Volt = 194 mph). Refer to Section 6
<br />for installation requirements to meet this wind rating.
<br />5.3.2 All GAF hip & ridge shingles noted herein are Classified in accordance with FBC Tables
<br />1507.2.7.1 and R905.2.6.1 to ASTM D3161, Class F, indicating the shingles are acceptable for
<br />us in all wind zones up to Vasd = 150 mph (Vt,lt = 194 mph). Refer to Section 6 for installation
<br />requirements to meet this wind rating.
<br />5.3.3 Classification by ASTM D7158 applies to exposure category B or C and a building height of 60
<br />feet or less. Calculations by a qualified design professional are required for conditions outside
<br />these limitations. Contact the shingle manufacturer for data specific to each shingle.
<br />5.4 All products in the roof assembly shall have quality assurance audit in accordance with the
<br />Florida Building Code and F.A.C. Rule 9N-3.
<br />6. INSTALLATION:
<br />6.1 Underlayment:
<br />6.1.1 Underlayment shall be acceptable to GAF and shall hold current Florida Statewide Product
<br />Approval, or be Locally Approved per Rule 9N-3, per FBC Sections 1507.2.3, 1507.2.4 or
<br />R905.2.3,
<br />6.2 Starter Shingles:
<br />Exterior Research and Design, LLC. Evaluation Report 01506.01.08-RS
<br />Certificate of Authorization #9503 F1.10124-116
<br />Revision 8: 02/06/2012
<br />Page 3 of 4
<br />TRINITY ERD
<br />6.2.1 Installation of ProStart Starter Strip Shingles and WeatherBlocker Starter Strip Shingles shall
<br />comply with the manufacturer's current published instructions.
<br />6.3 Asphalt Shingles:
<br />6.3.1 Installation of asphalt shingles shall comply with the manufacturer's current published
<br />instructions, using minimum four (4) nails per shingle in accordance with FBC Sections 1507.2
<br />or R905.2, with the following exceptions:
<br />Camelot, Camelot II / Camelot 30, Grand Slate II, Country Mansion 11, Monaco and
<br />Woodland require minimum five (5) fasteners per shingle
<br />6.3.2 Fasteners shall be in accordance with manufacturer's published requirements, but not less than
<br />FBC 1507.2.6 or R905.2.5. Staples are not permitted.
<br />6.3.3 Where the roof slope exceeds 21 units vertical in 12 units horizontal, special methods of
<br />fastening are required. Contact the shingle manufacturer for details.
<br />6.4 Hip & Ridge Shingles:
<br />6.4.1 Installation of Ridglass 8, Ridglass 10 and Ridglass 12 asphalt shingles shall comply with the
<br />manufacturer's current published instructions with a minimum two (2) nails per side [total of
<br />four (4) nails per shingle] and asphalt roofing cement.
<br />6.4.2 Installation of Seal -A -Ridge, Seal -A -Ridge Armorshield and Seal -A -Ridge Impact Resistant IR
<br />asphalt shingles shall comply with the manufacturer's current published instructions with a
<br />minimum two (2) nails per shingle.
<br />6.4.3 Installation of Timbertex Hip and Ridge asphalt shingles shall comply with the manufacturer's
<br />current published instructions with a minimum two (2) nails per shingle and beads of
<br />Sonneborn NP1 Gun Grade Polyurethane Sealant, Henkel PL Roofing and Flashing Sealant or
<br />TopCoat FlexSeal Adhesive.
<br />6.4.4 Fasteners shall be in accordance with the manufacturer's published requirements, but not less
<br />than FBC 1507.2.E or R905.2.5. Staples are not permitted.
<br />7. LABELING:
<br />7.1 Each unit shall bear a permanent label with the manufacturer's name, logo, city, state and logo
<br />of the Accredited Quality Assurance Agency noted herein.
<br />7.2 Asphalt shingle wrappers shall indicate compliance with one of the required classifications
<br />detailed in FBC Table 1507.2.7.1 / R905.2.6.1.
<br />8. BUILDING PERMIT REQUIREMENTS:
<br />As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the
<br />installation of this product.
<br />9. MANUFACTURING PLANTS:
<br />Contact the named QA entity for information on which plants produce products covered by Florida Rule
<br />9N-3 QA requirements.
<br />10. QUALITY ASSURANCE ENTITY:
<br />Underwriters Laboratories - QUA1743; (847) 664-3281
<br />- END OF EVALUATION REPORT -
<br />Exterior Research and Design, LLC.
<br />Certificate of Authorization #9503
<br />Evaluation Report 01506.01.08-118
<br />FL10124-R6
<br />Revision 8: 02/06/2012
<br />Page 4 of 4
<br />M
<br />1` o ro N
<br />o .7 -
<br />M o `o
<br />N LL
<br />O
<br />Q 2 `=
<br />EC1
<br />U
<br />Z �
<br />� c r-
<br />o �
<br />iC3
<br />O W
<br />Ln
<br />0 O U) M
<br />X
<br />(tf (n LL
<br />U T
<br />w
<br />N �
<br />U c�
<br />o `n
<br />N co
<br />(o CO
<br />L
<br />a
<br />VJ
<br />(1)
<br />(/)
<br />r
<br /><
<br />W
<br />4
<br />LL J
<br />J
<br />N
<br />dd
<br />0
<br />�
<br />�^
<br />v L.L_
<br />Z
<br />1
<br />W
<br />()
<br />H
<br />LL
<br />REVISIONS
<br />Al
<br />a
<br />0
<br />0
<br />Project Number:
<br />Check By:
<br />Date:
<br />Drawn By:
<br />Date:
<br />DRAWING NUMBER
<br />W
<br />N
<br />u7
<br />M
<br />
|