|
qr
<br />it
<br />N
<br />INDEX GENERAL NOTES:
<br />3 --
<br />LOT 27-PULSAR'OR'�,�`
<br />1. CONTRACTORS SHALL VERIFY ALL CONDITIONS AND DIMENSIONS AT SITE BEFORE CONSTRUCTION. ANY DISCREPANCIES SHALL BE REPORTED TO THE BUILDER FOR
<br />(,3n
<br />FL O. t.it SLAB PLAN *0`
<br />FL 1.12 FLOOR PLAN '0' JUSTIFICATION AND/OR CORRECTION BEFORE CONTINUING WITH WORK. CONTRACTORS SHALL ASSUME RESPONSIBILITY FOR ERRORS THAT ARE NOT REPORTED TO
<br />FL 1.12.1 FLOOR PLAN OPTIONS THE BUILDER.
<br />FL4.12 2. ALL WORK SHALL BE PERFORMED IN ACCORDANCE WITH ALL APPLICABLE NATIONAL, STATE, AND LOCAL CODES, REGULATIONS, AND FHANA MPS.
<br />ELEVATIONS
<br />Ft 5.13 ROOFPIONs'' 3. ALL DIMENSIONS SHOULD BE READ OR CALCULATED AND NEVER SCALED,
<br />FL 5.13.1 i ROOF PLAN'O'
<br />FL s.12 UTILITY PLANS'a 4. ALL FOOTINGS TO BE BELOW FROST LINE (SEE LOCAL CODE) AND MUST REST ON UNDISTURBED SOIL CAPABLE OF HANDLING THE BUILDING LOAD. CONSULT LOCAL
<br />IK.,�, �•�
<br />LOT 28 - PULSAR 'LR' ENGINEER FOR PROPER FOOTING AND REINFORCING SIZES.
<br />5. CONTRACTOR SHALL INSURE COMPATIBILITY OF THE BUILDING WITH ALL SITE REQUIREMENTS.
<br />b 1L
<br />FL 0.1.8 SLAB PLAN t• 6. IF BACKFILL EXCEEDS 4' AGAINST ANY FOUNDATION WALL, REINFORCE AS PER CODE.
<br />..✓y
<br />^ (},4
<br />FL 1.9 FLOOR PLAN 1' 7. ALL WOOD, CONCRETE, AND STEEL STRUCTURAL MEMBERS SHALL BE OF A GOOD GRADE AND QUALITY AND MEET ALL NATIONAL, STATE, AND LOCAL BUILDING CODES
<br />O• ,
<br />FL 1.9.1 FLOOR PLAN OPTIONS WHERE APPLICABLE.
<br />FL 4.9 SECTIONS
<br />FL 5.9 ELEVATIONS t' 8. ALL FOUNDATION AND STRUCTURAL MEMBERS SHOULD BE VERIFIED AND STAMPED BY AN ENGINEER IN THE STATE WHERE CONSTRUCTION IS OCCURRING DUE TO A
<br />FL 5.13.8 ROOF PLAN'U WIDE VARIANCE IN LOCAL CODES, SOIL BEARING CONDITIONS, FROST LINE DEPTH, GEOLOGICAL AND WEATHER CONDITIONS, ETC.
<br />FL 6.9 UTILITY PLANS •L• 9. THE CONTRACTOR IS RESPONSIBLE FOR ADJUSTING AND VERIFYING ALL STRUCTURAL DETAILS AND CONDITIONS TO MEET ALL LOCAL CODES TO INSURE A QUALITY
<br />LOT 29 - PULSAR 'KR' AND SAFE STRUCTURE.
<br />10. EXTERIOR FINISHES: INSTALLATION OF EXTERIOR LATHING AND FRAMING APPLICATION REQUIREMENTS TO BE PER F.B.C.R. -7TH EDITION (2020) RESIDENTIAL AND
<br />TYSON
<br />FL 0.1.7 SLAB PLAN W STM C 1063. ALL LATH AND RESISTANT MATERIAL, EXPANDED METAL OR WOVEN WIRE LATH SHALL BE ATTACHED WITH 1 1121NCH 11 GAUGE NAILS HAVING A 7/16 INCH
<br />FL 1.8 FLOOR PLAN HEAD, OR 7/8 INCH LONG 16 GAUGE STAPLES SPACED NO MORE THAN 6 INCHES, OR AS OTHERWISE APPROVED. THICKNESS OF TEXTURED FINISH OVER FRAME
<br />FL
<br />FL ( ) .8.1 FLOOR PLAN OPTIONS APPLICATION TO FLORIDA BUILDING CODE 7TH EDITION 2020 RESIDENTIAL AND ASTM C 926. WEEP SCREEDS SHALL BE A MINIMUM OF NO. 26 GALVANIZED SHEET
<br />4
<br />5.8 SECTIONS 5.6 ELEvarloNs x• GAUGE CORROSION -RESISTANT WEEP SCREED OR PLASTIC WEEP SCREED WITH A MINIMUM VERTICAL ATTACHMENT FLANGE OF 3-1/2 INCHES SHALL BE PROVIDED
<br />FL
<br />FL 5.13.7 ROOF PLAN 'K' AT OR BELOW THE PLATE LINE ON EXTERIOR STUD WALLS IN ACCORDANCE WITH ASTM C 926. THE WEEP SCREED SHALL BE PLACED A MINIMUM OF 4 INCHES ABOVE
<br />FL6.8 UTILITY PLANS'M THE EARTH OR 2 INCHES ABOVE PAVED AREAS. THE WEATHER RESISTANT BARRIER SHALL LAP THE ATTACHMENT FLANGE. STUCCO APPLICATION AND CURING PER
<br />LOT 30 - PULSAR 'A' FLORIDABUILDING CODE EDITION (2020) RESIDENTIAL IN ACCORDANCE WITH ASTM C 92E.
<br />7-PLEX A
<br />11. CHAPTER AND SECTIONS REFER TO F.B.C.R. - 7TH EDITION (2 (2020). NOTE: ANY DIMENSION AND/OR CALLOUTS WITHIN THIS SET OF DRAWINGS REFERENCING LUMBER
<br />FL 0.1 SLAB PLAWN SIZES OR WALL THICKNESS ARE TO BE CONSIDERED "NOMINAL DIMENSIONS". ALL DIMENSIONS ARE TO ROUGH FRAMING UNLESS OTHERWISE NOTED.
<br />FL 1.1 FLOOR PUN 12. IT IS THE RESPONSIBILITY OF THE LICENSED ELECTRICIAN TO ENSURE THAT ALL ELECTRICAL WORK IS IN FULL COMPLIANCE WITH N.F.P.A. 70, N.E.C. 2017, F.B.C.R. -
<br />FL 4.1.1 FLOOR PI -AN OPTIONS
<br />FL 4.1 sEcnanls 7TH EDITION (2020), AND ALL APPLICABLE LOCAL STANDARDS, CODES, AND ORDINANCES.
<br />FL 5.1 ELEVATIONs'A' 13. EGRESS: EACH BEDROOM MUST HAVE ONE WINDOW THAT COMPLIES WITH EGRESS CODES, IF THERE IS NO ACCESS TO EXTERIOR THROUGH A DOOR THE WINDOW
<br />FL 5.13 ROOF PLAN A MUST HAVE A MAXIMUM CLEAR OPENING HEIGHT OF 44" ABOVE FINISH FLOOR LINE OF THAT PARTICULAR ROOM.
<br />FL6A UTILITY PLANS'A 14. ASPHALT SHINGLES IF APPLICABLE):
<br />LOTS 27 3 3
<br />LOT 31 - PULSAR 'M WIND RESISTANCE OF ASPHALT SHINGLES - ASPHALT SHINGLES SHALL BE INSTALLED IN ACCORDANCE WITH SECTION R905.2.6.1.
<br />ASPHALT SHINGLES SHALL ONLY BE USED ON ROOF SLOPES OF TWO UNITS VERTICAL IN 12 UNITS HORIZONTAL (2:12) OR GREATER FOR ROOF SLOPES FROM TWO
<br />FL FLAB PLAN rr UNITS VERTICAL IN 12 UNITS HORIZONTAL (2:12) AND LESS THAN FOUR UNITS VERTICAL IN 12 UNITS HORIZONTAL (4:12), TWO LAYERS OF UNDERLAYMENT COMPLYING
<br />1.10
<br />FL .tFLOOR PLANO WITH ASTM D 226, TYPE I OR TYPE II, ASTM D 4869, TYPE It OR TYPE IV OR ASTM D 6757 IS REQUIRED IN ACCORDANCE WITH SECTION R905.11. FOR ROOF SLOPES
<br />FL 1.10.1 FLOOR PLAN OPTIONS
<br />FL 4.10 SECTIONS FROM FOUR UNITS VERTICAL IN 12 UNITS HORIZONTAL (4:12) AND GREATER, ONE LAYER OF UNDERLAYMENT COMPLYING WITH ASTM D 226, TYPE II, ASTM D 4869, TYPE
<br />FL 5.10 ELEVATIONS M' IV OR ASTM D 6757 IS REQUIRED IN ACCORDANCE WITH SECTION R905.11.
<br />FL5.13.9 ROOF PUN M• 15. TERMITE TREATMENT WILL BE DONE USING SENTRICON TERMITE BAITING STATIONS AND AND SHALL BE IN ACCORDANCE WITH FBC(R), SECTION R318 AND ALL
<br />-
<br />PLAN 1386 PULSAR SF
<br />TOTAL BUILDING SF
<br />FL 6.10 UTILITY PUNS M.
<br />RELATED SUB SECTIONS.
<br />LOT 32 - PULSAR 'E 16. UTILITY EASEMENT: USE OF THE SUBDIVISION FOR UTILITIES, INCLUDING BUT NOT LIMITED TO UTILITY EASEMENTS AS SHOWN ON PLAT, SHALL BE IN ACCORDANCE
<br />WITH THE APPLICABLE PROVISIONS OF THIS DECLARATION. THE DECLARANT AND ITS AFFILIATES AND ITS AND THEIR DESIGNEES SHALL HAVE A PERPETUAL
<br />NAME
<br />AREA
<br />NAME
<br />AREA
<br />FL FLAB PLANK EASEMENT OVER, UPON AND UNDER THE LOTS (INCLUDING BUT NOT LIMITED TO THE UNITS) AND THE COMMON AREAS (EXCLUDING THE CONSERVATION AREAS) FOR
<br />FIRST FLOOR
<br />588 SF
<br />FIRST FLOOR
<br />4858 SF
<br />t2
<br />FL 1.2 FLOOR PLAN E
<br />FL FLOOR PLAN OPTIONS THE INSTALLATION, OPERATION AND MAINTENANCE OF UTILITY IMPROVEMENTS, INCLUDING BUT NOT LIMITED TO ELECTRIC LINES, WATER AND SEWER PIPES,
<br />SECOND FLOOR
<br />1798 SF
<br />SECOND FLOOR
<br />6525 SF
<br />4.2.1
<br />FL .2 sEDnoNs TELEPHONE LINES, COMMUNITY AND / OR CABLE TELEVISION AND SECURITY AND OTHER COMMUNICATION LINES, EQUIPMENT AND MATERIALS AND OTHER SIMILAR
<br />HEATED 1386 SF
<br />HEATED 11383 SF
<br />FL 5.2 ELEVATIONS 13 TELEVISION, RADIO AND SECURITY CABLES AND ALL FUTURE TECHNOLOGICAL ADVANCES NOT NOW KNOWN), FOR SERVICE TO THE LOTS AND OTHER PORTIONS
<br />FL 6.13.1 ROOF PLAN •e• OF THE SUBDIVISION, PROVIDED THAT NOOWNER'S NORMAL RESIDENTIAL USE OF SUCH OWNER'S UNIT SHALL BE INTERFERED WITHIN ANY UNREASONABLE
<br />i
<br />FL 6.2 UTILITY PUNSa MANNER.
<br />GARAGE
<br />226 SF
<br />GARAGE
<br />1771 SF
<br />LOT 33 - PULSAR 'N' 17. EXTERIOR WALL ENVELOPE: BUILDER IS RESPONSIBLE FOR PROVIDING AND MEETING ALL REQUIREMENTS OF SECTION 107.2.4 OF THE F.B.C. BUILDING BY PROVIDING
<br />PORCH
<br />32 SF
<br />PORCH
<br />249 SF
<br />ALL DETAILS LISTED UNDER THIS SECTION, INCLUDING BUT NOT LIMITED TO, THE MANUFACTURER'S INSTALLATION INSTRUCTIONS AND ALL SUPPORTING
<br />.1
<br />FL FLPLAN DOCUMENTATION TO ENSURE THE WEATHER RESISTANCE OF THE EXTERIOR WALL ENVELOPE IS MAINTAINED.
<br />PATIO/COV. PORCH
<br />80 SF -
<br />PATIO/COV. PORCH
<br />640 SF
<br />FL 1. .11 FLOOR LAN•N N
<br />OR PLAN 18. STUCCO CONTROL JOINTS TO BE INSTALLED PER ASTM C 1063-06 7.11.4.1 THRU 7.11 A.4 AT FRAMED WALLS TO DELINEATE AREAS NOT MORE THAN 144 S.F. AND
<br />FL 1.71.1 FLOOR PLAN OPTIONS ( )
<br />UNHEATED 338 SF
<br />UNHEATED 2660 SF
<br />FL4.11 SECTIONS DELINEATE AREAS NOT MORE THAN 100 S.F. FOR HORIZONTAL APPLICATIONS. DISTANCE BETWEEN CONTROL JOINTS SHALL NO. EXCEED 18 FT. IN EITHER DIRECTION
<br />FL 6'11 ELEVATIONSN• OR A LENGTH -TO -WIDTH RATIO OF 2 1/2 TO 1. A CONTROL JOINT SHALL BE INSTALLED WHERE CEILING FRAMING OR FURRING CHANGE DIRECTION, AND WHERE
<br />FL5.13.10 ROOF PUN'M EXPANSION JOINT OCCURS IN BASE EXTERIOR WALL. WALL OR PARTITION HEIGHT DOOR FRAMES SHALL BE CONSIDERED AS CONTROL JOINTS.
<br />FL 6.17 UTILITY PLANS'N
<br />19. FLASHING SHALL BE INSTALLED AT WALL AND ROOF INTERSECTIONS, DECK AND WALL INTERSECTIONS, AT GUTTERS, AT ALL CHANGES IN ROOF SLOPE OR
<br />7-PLEX BUILDING - A DIRECTIONS, AND AROUND ROOF OPENINGS.
<br />APPROVED CORROSION -RESISTANT FLASHING SHALL BE APPLIED SHINGLE FASHION IN SUCH A MANNER AS TO PREVENT ENTRY OF WATER INTO THE WALL CAVITY
<br />Ao.1.SUB PERIMETER PUN 7-PLEX OR PENETRATION OF WATER TO THE BUILDING STRUCTURAL FRAMING COMPONENTS. THE FLASHING SH ALL EXTEND TO THE SURFACE OF THE EXTERIOR WALL
<br />A I'I.2 SLAB PERIMETER PLAN 7-PLEX FINISH. APPROVED CORROSION -RESISTANT FLASHING SHALL BE INSTALLED AT ALL REQUIRED LOCATIONS PER R703.8.
<br />A t i FIRST FLOOR PLAN 7-PLEX
<br />A 1.1.1 FIRST FLOOR PLAN 7-PLEX 20. WINDOWS SHALL BE INSTALLED AND FLASHED IN ACCORDANCE WITH THE MANUFACTURERS WRITTEN INSTALLATION INSTRUCTIONS. WRITTEN INSTALLATION
<br />A2.1 SECOND FLOOR PLAN7-PLEX INSTRUCTIONS SHALL BE PROVIDED BY THE MANUFACTURER FOR EACH WINDOW.
<br />A2.1.1 SECOND FLOOR PLAN 7-PLEX 21. ENERGY CALCULATIONS FOR HEATING AND COOLING CAPACITIES SHALL BE FURNISHED BY THE GENERAL CONTRACTOR AS AN ATTACHMENT TO THIS PLAN SET AT
<br />A.1 ELEVATIONS 7-PLEX
<br />ALL WORK SHALL C01�4PLY
<br />A 5.1.1 ELEVATIONS 7-PLEX THE TIME OF APPLICATION FOR PERMIT.
<br />WITH PREVAILING
<br />A 5.1.2 ELEVATIONS 7-PLEX MECHANICAL APPLIANCES SHALL BE ACCESSIBLE FOR INSPECTION, SERVICE, REPAIR, AND REPLACEMENT WITHOUT REMOVING PERMANENT CONSTRUCTION,
<br />CODES FLORIDA BUILDING
<br />A 5.1.4 ELEVATIONS 7-PLEX OTHER APPLIANCES, OR ANY OTHER PIPING OR DUCTS NOT CONNECTED TO THE APPLIANCE BEING INSPECTED, SERVICED, REPAIRED, OR REPLACED. A LEVEL
<br />CODE,
<br />NATIONAL
<br />A 5.1.3 ELEVATIONS 7-PLEX
<br />A 5.1.5 ROOF PLAN 7-PLEX WORKING SPACE AT LEAST 30 INCHES (762 MM) DEEP AND 30 INCHES (762 MM) WIDE SHALL BE PROVIDED IN FRONT OF THE CONTROL SIDE TO SERVICE AN APPLIANCE.
<br />ELECTRIC CODE;
<br />A 5.1.6 ROOF PLAN 7-PLEX DUCTS SEPARATING THE DWELLING FROM THE GARAGE SHALL BE CONSTRUCTED A MIN. #26
<br />THE GARAGE AND DUCTS PENETRATING THE WALLS OR ISHALL
<br />I(0.48
<br />AND THE CITY
<br />RAGE.GARAGE
<br />GAUGE MM) SHEETS EEL OR OTHER APPROVED MATERIAL ANDN HAVE NO OPENINGS INTO HE GARAGE.
<br />DETAIL SHEETS
<br />OF ZEPHYRHILLg
<br />ORDINANCES
<br />FOUNDATIONS AND SUPPORTS FOR OUTDOOR MECHANICAL SYSTEMS SHALL BE RAISED AT LEAST 3 INCHES (76 MM) ABOVE THE FINISHED GRADE AND SHALL ALSO
<br />D-1 DETAILS CONFORM TO THE MANUFACTURERS INSTALLATION INSTRUCTIONS.
<br />D-2 DETAILS AUXILIARY DRAIN PAN. CATEGORY IV CONDENSING APPLIANCES SHALL BE PROVIDED WITH AN AUXILIARY DRAIN PAN WHERE DAMAGE TO ANY BUILDING
<br />D-3 DETAILS COMPONENT WILL OCCUR AS A RESULT OF STOPPAGE IN THE CONDENSATE DRAIN PIPING SYSTEM. THESE PANS SHALL BE INSTALLED IN ACCORDANCE WITH THE
<br />D-4 DETAILS APPLICABLE PROVISIONS OF SECTIONS M1411.3.
<br />D-5 DETAILS
<br />THIS PROJECT MUST COMPLY WITH: 2020 FLORIDA BUILDING CODE RESIDENTIAL - 7TH EDITION, FLORIDA FIRE
<br />Q
<br />PREVENTION CODE 7TH EDITION (THIS INCLUDES THE FLORIDA SPECIFIC EDITION OF 2018 NFPA 1 UNIFORM FIRE CODE,
<br />REVIEW DATE "`�
<br />13D,2016EDITION,
<br />STANDARD FOROTHE INS ALL?TIONOFSPRINK ER SYSTEMS NLONE- ANDIRE TWO- AIMICzLYDWELLINGSA
<br />CITY OF ZEPHYRHI
<br />AND NFPA 70,2017 EDITION, NATIONAL ELECTRICAL CODE. NFPA 72,2016 EDITON,
<br />FIRE ALARM ANTD URED SIGNALLING CODE. N PA 90A, 22018 EDITION, STANDARD OR HE (INSTALLATION OF AIR-COND TTONNG
<br />PLAN EXAMINER
<br />AND VENTILATING SYSTEMS. 2020 FLORIDA BUILDING CODE ENERGY CONSERVATION, 7TH EDITION. 2020 FLORIDA
<br />BUILDING CODE MECHANICAL, 7TH EDITION, 2020 FLORIDA BUIDLING CODE PLUMBING, 7TH EDITION. 2020 FLORIDA
<br />BUILDING CODE FUEL GAS, 7TH EDITION.
<br />OCCUPANCY: RESIDENTIAL - R3 CONSTRUCTION TYPE: VB-PROTECTED, SPRINKLED
<br />ISSUE DATE:
<br />05.25.2022 FOR
<br />REVIEW
<br />REVISIONS:
<br />These drawings are the
<br />property of Starlight
<br />Homes and are not to be
<br />utilized for construction, or
<br />copied in part or in whole
<br />without permission from
<br />the builder. O 2022
<br />Starlight Homes
<br />I LAST REVISION I
<br />SHEET NO:
<br />T-1
<br />f
<br />
|