|
ULAMr-DADE COUNW
<br />PRODUCTCOWTROL SEMON
<br />11905 Slit 26 street Room 202
<br />DEPARTMENT OF REGULATORY AND ECO* 010C RESOETRCES WM) Mm. FlorkU 33175-2474
<br />BOARD AND CODE ADIUNISTRATION- DrMION T(796)315-2590 F('7W315-2599
<br />NOTICE OF ACCEPTANCE
<br />PGT industries, Inc.
<br />1070 Techuolo&y Drive„
<br />North Venice, FL 34275
<br />SCOPE:
<br />ThisNOA is being issued under the applicable rules and regulations go%wuing the use of con.trucrion mateiials.'Ibe
<br />documentation submittled has been revwwved and accepted by hfiami Dade CountyRER -Product Control motion to
<br />be used iu I+rfi= Dade Couaty aid valuer area$ whtxs ailm ed 4y the Auihanty Ha -wing Jurisdiction (AHJ).
<br />ThisNOA shall not be valid after the expiration date statedbelow. The Miami -Dade County Product Control Section
<br />(In Miami Dade County) and orihe AIU (in areas other tsanMianu Dade County) reserve the right to have this
<br />product or material tested for quality assvranceputposes. If this product or material fails to perform in the accepted
<br />manner. the manufacturer will incurthe expense of such testing andthe AlUmay immediatelyrevoke, modify. or
<br />o such duct or material within their ' diction. RER reserves the t to revoke this
<br />§nspeud the Use f ch pro ports right
<br />acceptance, if it is determined kvN iami-Dade County Product Control Section that this product or material fails to
<br />meet the requirements of the. applicable building code -
<br />This product is approved as described herein and has been designed to comply with the Florida Budding Code_
<br />including the ugh Velocity Hurricane ?.one
<br />DESCRIMOIlT: Series "55M 770" Vinyl Sliding Glass Door (Reinforced) w,,*o 902 & 130 coraers-L-MJ.
<br />APPROVAL DOCUMENT. Drawing No. MD-5570.0 Rev B. titled "Vinyl Sliding Glass DoorNOA (LM)". sheet
<br />1 through 21 of21,preparedbymanafacanw- dated 10,105.15 and last revised on 02/0ICI1.signed and sealed by
<br />4. Lynn Miller, P_E__ bearing the Nfia u-Bade CountyProduct Control Retizsion sta0v with the Notice of
<br />Acceptance number and expiration date by the Nfiiami-Made County Product Control Section.
<br />N IS;SELE LW.ACT RAMG: Large and Small Mhsile Impact Resistant
<br />Limitations:
<br />1- See table 1 ('sheet 2) and table 2 (sheet g) for applicable SOD unit sires, design pressores, reinforcements types,
<br />glass types, sill riser (see tables B-1 & B-2, sheets 74) and anchor layout sheets requirements in 11 thou 16-
<br />?_ Rigid White FVC, Tan (Note -white) Rigid PVC andBrown coated (Painted or laminated) white Rigid PVC to be
<br />labeled per referenced N'OA's requirements.
<br />3. Egress operable doors must comply with min clear width or height per FBC requirement, as applicable.
<br />4. Pocket walls, under separateapproval, to be re,,unv ed by Building official
<br />L +iB£L iG: Each unit shall bear a permanent label with the manufacturees name or logs. city. state and series aid
<br />following statement: ' Miami -Dade County Produc t Control Approved". noted herein.
<br />R N-EWAL of this NOA shall be considered after a renewal application has been filed and there has beenuo
<br />change in the applicable building code negatively affecting the performance ofthis product.
<br />TERMINATION of this NOA will occur after the expiration bate or if thete has been a re-%uwa, or change in the
<br />materials, use, andtor manufacture ofthe product or process. N isuse of this NOA as an endonenmem of any product,
<br />for sales, advertising or any odwpuiposes shall automa a ally terminale this NOA. Failure to complywith any
<br />section of this NOA shaft because for teminatim and removalofNQA.
<br />AD,% ERTISE-t4v_N-T: The NOA nuaber preceded by the words hFrann Dark County: Florida and followed by the
<br />expiration date maybe displayed inadvwtisvmgWerature. Ifanyportionofthe NOAisdisplayed. then it shall be
<br />done is its entirety.
<br />LNSPECTION : A copy of this entire NOA sba11 be provided to the user bythe mamifactut er or its distributors and
<br />shall be available for inspection at the f ob site at the request of the Building Official.
<br />This NOA re-%ises & renews NOA 420-0429.05 and consists of this page 1 and eimlehee pages E- 1. E-2. E-3. E-4,
<br />E-5 c& E-6 as well as approval document me:ntiowd abme.-
<br />The .svbmited documentation was miewed by ishaq L Cbnnda, PE.
<br />TOA No. 21-0205.03
<br />M Expiration Datet April 14, 2026
<br />4 *,r -1� ! q 1:1. Approval Date:1,lareh 29,10'.1
<br />Page 1
<br />PGT Industries. Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
<br />1. Evidence submitted under previous NOA
<br />A. DRAWINGS
<br />1. Manufacturers die drawings and sections.
<br />(SubmiArd render A'U A X& 1I-0107 04)
<br />2. Drawing No. MD-5570.0. titled "Vinyl Sliding Glass Door NOA W , sheets 1
<br />through 21 of 21, prepared by manufacturer, dated 10,05E15, with r . ision A elated
<br />0410-/17, signed and sealed by A. Lynn Miller, P.E.
<br />B. TESTS
<br />l . Test report on 1) Uniform Static Air Prere Test, per FBC'_ TAS 202-94
<br />2) Large Missile Impact Test per FBC, TAS 201-94
<br />3) Cyclic Wind Psrre Loading per FBC. TAS 203-94
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door: prepared
<br />by Fenestration Testing Lab, Inc:, Test Report No. FIL 8717. dated 1210715, sued and
<br />sealed by ldahris Ortega. P. E. (Test report revised on 0211536 and 02,2446)
<br />2. Test report on 1) Air Dutton Teat, per FBC, TAS 202 94
<br />2) Uniform Static Au -Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance Test, per FBC. TAS 202-94.
<br />4) Large Missile Impact Test per FBC, TAS 201-N
<br />5) Cyclic Wind Pressure Loading per FBC- TAS 203-94
<br />6) Faceted Entry Test, per FBC, TAS 202-94
<br />along with marked -up drawings and installation diap= ofvinyrl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc.. Test report No. FTL 8546, dated 111064 51, signed and
<br />sealed by Idalmis Ortega, P. E. (Test report revised on 01 r44116 and 02111,02016)
<br />3. Test report on 1) Air Infiltration Test, per FBC. TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />3) Walter Resistance Test, per FBC, TAS 202-94
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loading per FBC. TAS 203-94
<br />6) Forced. Entry Test; per FI3C, TAS 202-94
<br />along wth marked -up drawings and installation diagram of vinyl sliding glass door: prepared
<br />by Fenevration Testing Lab, Inc.,, 'Test Report No- FTL 8547, dated 12t04115t signed and
<br />sealed by Idalmis Ortega, P. E. (Test report revised on 024516)
<br />4. Test report on 1) Air Infiltration Test, per FBC_ TAS 202-94
<br />2) Uniform static Air Pie Test, per FBC, TAS 202-94
<br />3) Water Resistance Test. per FBC, TAS 202-94
<br />4) Large lfis!ile Itt' W Test per.FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along with marked -UP drawings and installation diagram ofvmyl. sliding glass door prepared
<br />by Fenestration Testing Lab. Inc., Test Report No. FIL SMS.. dated 1213415, signed and
<br />sealed by Idalmis Ortega, P. E_ (Test report revised on 01,04.46 and 02/1146).
<br />t
<br />hhaq L (haueda, P.E,
<br />Product Control Unit Supervisor
<br />NOA tio.21-0206.03
<br />Expiration Date: April 14, 2026
<br />Approval Date: Marti 26, 2021
<br />E -1
<br />�_Z"AtMr!MOVTAMM
<br />NOTICE OF ACCEPTANCT: EVIDENCE SL'BMIrTED
<br />B. TESTS (continued)
<br />5. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance Test. per FBC, TAS 20294.
<br />4) Large Missile Inq)act Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loadingper FBC, TAS 203-94
<br />6) Fo red Entry Test. per FBC. TAS 202-94
<br />along withmrrkedup drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab. Inc:. Test Repent No_ FTL 8549, dated 11 V615, signed and
<br />sealed by Idalrms Ortega, P.E.. (Test report revised on 1104115 and 02111r16)
<br />6. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test. per FBC. TAS 202-94
<br />3) Water Resistance Test. per FBC, TAS 202-94.
<br />4) Large Missile Intact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br />along with marked -up drawings and installation diagram of vvW1 sliding glass door, prepared
<br />l y Fenestration Testing Lab, Inc., Test report No. FTL 8552, dated L 1,04115. signed and
<br />sealed by Idalmis Ortega, P. E. (Test repot revised on 02115,2016)
<br />7. Test report on 1) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />2) Large Missile Iict Test per FBC, TAS 201-94
<br />3) Cyclic Wind Pressuua Loading per FBC. TAS 203-94
<br />along with marked up drawings and installation diagram of vinyl sliding ,glass door, prepared
<br />by Fenestration Testing Lab. Inc., Test Report No. FTL 6638 (samples A-1 thru A-22), dated
<br />11 19i'10. sighed and sealed by Jorge A. Causo, P_ E_ (Subrrtftled Nnder1V0 4 ,%r6. 11-
<br />0107. 041
<br />8 Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC. TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94.
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wired Pressure Loaldmgper FBC, TAS 203-94
<br />6) Forced Entry "Pest, per FBC, TAS 202-94
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc- Test Report No_ FIL 6337 (samples A-1 tbru A-5). dated
<br />1110640, signed and sealed by Jorge A. C tuso- P. E. (kibmiNed under N0.4 A'o.11-
<br />0107 0.9)
<br />C. C ALCIrLATIONS
<br />L Anchor verification calculations and structural analym, complying with FBC-2014,
<br />prepared. by PGT; dated 11,09:015and last revised on 024 5;16, signed and sealed by
<br />IW AnthoayL ller, P.E. (Subinifted under NOA.Xe. 15-1210.01).
<br />2. Glazing complies with ASTMS-1300-09-
<br />Iraq L Clauds, P.E.
<br />Product Control Zait Supervisor
<br />NOA 11o. _1-02015.03
<br />Expiration Date: April 14, 2026
<br />Approval Dates bfarck 2;, 2021
<br />E -2
<br />PGT Industries, Inc.
<br />$01
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUB1ITTED
<br />D. QUA= ASSUIEL4, TCE r
<br />E.
<br />I. Miami Dade Department of Regulatory and Economic Resources. (R.ER).
<br />n 5
<br />„
<br />MATERIAL C"ERTIFICATIQNTS
<br />Ra
<br />I . Notice of Acceptance No.1:."528.14 issued to Vision Extrusion Limited for t
<br />. d
<br />"'%V, hhe Rigid PVC' Exterior• Extrusions for Windows and Doors"', dated 081,311-
<br />; Q;
<br />expiring, on. 09�3Q'19.
<br />d ;
<br />2. Notice of Acceptance No.16-0920.08 issued to Vision Extrusion Limited for their - B
<br />a
<br />1000 Tan 202 and lighter Shades (Yon -White) Rigid PVC Exterior EstlEusions for
<br />TE?a'ndows and Doors", dated 11%16, expiring on 12129:21.
<br />9 a
<br />3. Notice of Acceptance No.15-0,528.15 issued to Vision Extrusion Limited for their
<br />G
<br />"Brown Coated (Painted or Laminated) TVhite Rigid PVC Exterior Extrusions for
<br />a
<br />Windows and Doors", dated 08113115, expiring on 0930/ 19.
<br />4. Notice of Acceptance No_ 16-0712.02 issued to ENERGI Fenestration Solutions USA,
<br />Inc. for their "TAN, 3040 and Lighter Shades (von -White) Rigid PVC Exterior
<br />Extrusions for Windows and Doors" dated 09l15,116, expiring out 02,04r21.
<br />5. Notice of Acceptance No.16-0712.04 issued to ENERGI Fenestration Solutions USA, -
<br />Inc. for their "Bronze and Lighter Shades of Cap Coated Rigid PVC Exterior
<br />Extrusions for N%Indows and Dooms" dated 0945116, expiring on 0446,20.
<br />& Notice of Acceptance No.16-0712.03 issued to ENERGI Fenestration Solutions USA,
<br />Inc. for their "N%liite Rigid PVC Exterior Extrusions for Windows And Doors" bated
<br />08,40117, expiring on 02 28118.
<br />T Test reportsNo(s). 10-0t)2-792(A), 10-06-MO527. 535753-09. per ASTME-84,
<br />ASTNID 1929 and ASTMD-4535, issued by E3COVA to Vision Exxtrusim for cellulosic
<br />composite material.
<br />(Submjr red readerAV0.4 No. ]1-0107.04)
<br />8. Notice of Acceptance No.14-0916.11 issued to Xuraray America., Inc. for their
<br />"Seatn-G:las+8' (Clear and T4ilke) Int+eriayee. +culling on 07/04/18.
<br />9. Notice ofAcceptance No.16-11.17.01 issued to Kuraray America, Inc. for their
<br />"Trodfol ° Ultraclear. Clear and Color MB Interlayer i ". expiring on 07/08119.
<br />F, ST ATE11EPATS
<br />1. Statesneut letter ofconfonnance with FBC-5'aEdidon (2014) and FBC-6tlEdition
<br />(2017), issued by manufacturer, dated 0& MA7, signed & sealed by Lynn Miller. RE_
<br />2. Statement letter of no financial interest, dated 04,11 & 17. issued by maanufwturer, signed
<br />b'c sealed by Lynn Miller. P.E_
<br />3. Letter of lab compliance, part of the above test reports.
<br />4. REK Test Proposal No.17-0387. dated 05; 05?17, signed by Ishalq Clmda. P.E_
<br />G. OTHER
<br />1. Notice of Acceptance No.15-1210.01, issued to PGT Industries, for their Series
<br />"557012770" Vinyl Sliding Grass Door (Reinforced) - L.M L", expiring on. 0411.4;'21 _
<br />Ishaq L Ctranda, P.L.
<br />Product Control gait Supervisor
<br />NOA No, 11-020..03
<br />Expiration Date: April 14, 2024
<br />Approval Date: March 26, 2021
<br />E -3
<br />Q�
<br />Q�
<br />s
<br />in
<br />N
<br />—cu
<br />O
<br />L
<br />CU
<br />a
<br />O
<br />O
<br />C
<br />. �
<br />CU
<br />V
<br />Cn
<br />O
<br />.O
<br />0
<br />0
<br />O
<br />Q
<br />O
<br />CU
<br />0c
<br />.4—_
<br />lL
<br />CU
<br />cn
<br />0
<br />0_C
<br />4-5
<br />tZ
<br />r
<br />PGT Iadmoies, Inc.
<br />CGI AVmdows and Doors, Inc.
<br />PGT Industries, Int.
<br />NOTICE OF ACCEPTANCE: EV DENCE SUBMITTED
<br />INOTICE OF 1►CCEPT.kNCE: EVIDENCE SUBMITTED
<br />NOTICE OF ACC EPTAINVU: EVIDENC:'E SUBMITTED
<br />2. Evidence Submkted under re,%ious submittal
<br />P
<br />E. M EATERLAL CERTIFICATIONS (continue)
<br />3. New Evidence Submitted
<br />5. Quancac Part Super Spacer ,Standard complying with ASTM C518 Thermal Conductivity
<br />A. DRAT' T+4GS
<br />0.981 BTU -in/ hr.-fig-F, ASIM F 1249 WVTR Pass. ASTM D3985 C� en Pass, AS`IM E
<br />A. DR.1WLNGS
<br />1. Drawing No. MD-5570.0 Rer B. titled -Vinyl Sliding Glass Door NOA ('-, sheets
<br />2190 I.G. DurabilityNo Fog -Pass. (Su6nd ued reorder presions VtlA Xo.1.S- 409. 05)
<br />1. Draws? No-1NiD-5;1570.0 Rev B. titled "Vinyl Sliding Glass Door NOA (LM)". sheets I
<br />1 through 21 of 21, prepared by n3annfacturef, dated 10,t5115 and last revised on
<br />through 21 of 2l. prepared by manufacturer. dated 10�105115 and last revised on 02, 01.2 L
<br />04,"22, 20, signed and sealed by A- Lynn Miller, P.E.
<br />6. Qua= Part Duraseai conVlymg with ASTM C518 Tbennal Conductivity 2.22 BTU -in-
<br />signed and sealed by A. Lynn Miller, P.E_
<br />hr.it=-'F, ASTM F 1249 ArVTR-Pass, ASTM D 1�434 Argon Perrneance-Pain ASTM E
<br />Note: This, revision consists replacement of same existing installation screw with flat head.
<br />S�
<br />B. TESTS
<br />2.f 89 I. G_ Durability -No Fog, ASih+l E 54Ca Dew Porter i?e~rTe4vp�uent -20°F in �#8 his_
<br />1. Test reports on: 1) Air Infiltration. Test, per FBC. TAS 202-94
<br />(Sieber fl%d under ?fir() 4 A& 15-0409.051.
<br />2) Uniform Static Air Pressure Test, Loading per FBC. TAS 20294
<br />7_ Vision Extrusions,. Ltd. Parts complying with PVC-AAMA 303-13, Vokmiasy Specification
<br />B. TESTS
<br />3) Water Resistance Test. per FBC_ TAS 202-94
<br />for Rigid Polyvinyl C:'hlar de (PVC) Exterior Profiles for Visim Extusions, Ltd.-VEX-1 by
<br />1. None.
<br />4) Large Missile Impact Test per FBC. TAS 201-94
<br />AAMA Fenestration Exterior Profile Certification Program (SubrreWd under eti'0.4 Na 1 S-
<br />C, CALC1 LATTQNS
<br />5) Cyclic Wind Pres=e Loadingper FBC, TAS 203-94
<br />0409 #5)
<br />1 1`t�
<br />along with marked -up drawings and installation diagram of all PGT Industnes, Inc.
<br />$_ Vision Extrtlsicrns. Ltd. Parts cotnptlring with PVC .+TAMA 303-13.
<br />-+--+
<br />repncsenta h e units listed below and tested to qualify Dowsil 791 and Dowsil 983 silicones.
<br />(Sieben riled under NQ.- .Vo.1 5-0409 05)
<br />D. Qt%ALII4 ASSL?RAYCE
<br />prepared by Fenestration Testing Laboratoty, Inc.. Test Reports No.:
<br />9. PVC-AAMA 303-13, Voluntary Specification for Rigid Polyvinyl Chloride (,PVC) Exterior
<br />Profiles for Vision Extrusions, Ltd--VEX-1 by AAMA Fenestration Exterior Profile
<br />1. Miami -Dade Department of Regulatory and Economic Resources (RER).
<br />C_
<br />FTL-7897, PGT PA15520 PVC Fixed Window (unit 6 in proposal), dated 09,11344
<br />FTL-20-2107.1. PGT SGD780 Alim>innurn Sliding Glass Door (unlit 7 in proposaP FTL-20-
<br />Certificatice Program.
<br />2107.2, PGT CA740 Alum Outswing Casement Urmdow (unit 8 in proposal) FTL-20-
<br />10. Notice of Acceptance No. 18-1217.14 issued to Energi Fenestration Solution, USA, Inc. for
<br />E, MATERLAL CERTIFICATIONS
<br />co
<br />2107.3, PGT PR'7620A Aluminum Fixed Window (unit 9 in proposal) and FTL-20-2107.4.
<br />their "Tan 3040 & light shade (non -white) N%Id p Rigid PVC Exterior Extrusions for
<br />1_ Notice of Acceptance No. 19-030 .02 issued to Kuurar•ay America, Inc. for Breit
<br />>
<br />PGT PW7620A Aluminum Fixed Window (unit 10 in proposal) dated 07/13/20, all signed
<br />Windows and Doors", expiring on 02X4, 21.
<br />"Trosifoit Ultrariear, Clear, and Color PTB Glass Interla;rei*-, expiring on 07,080-4-
<br />�
<br />0
<br />and :sealed by Idalmis Ortega, P.E.
<br />11 Notice of Acceptance No. 1"122.02 issued to Fxergi Fenestration Solution, USA, Inc, for
<br />`,
<br />Z_ Notice of Acceptance No.17-080&02 issued toKu rarau America, Inc. for their
<br />'Lj"b
<br />Q
<br />their series 1%lite Rigid PVC Exterior Extmsions for Windows and Doous expiring on
<br />"SentryGlaasl (Clear and te) Glass Interlayers", a giring on 07f0C23_
<br />Q
<br />C. CALC[?LATIOIN S
<br />02029-123 -
<br />3.. Notice of Acceptance No.18-1106.10 issued to Vision Extnrsioa>s Limited for their "Brown
<br />C)
<br />Q
<br />1. Anchor verification cakulatiorls and structural analysis, cotnpl}**inrag with FBC 711
<br />12- Notice of Acceptance No. 20-0203.03 issued to Etuergi Fenestration Solution, USA Inc. for
<br />Coated (Painted or Laminated) l�%I to Rigid PVC Exterior Extrusions for Windows
<br />Edition (2020), dated 04121110, prepared by manufacturer- signed and sealed by
<br />their "Bronze &light shade cap coated 117hite Rigid PVC Exterior Extrusions for
<br />and Doors", expiring on 09.30124.
<br />��
<br />U
<br />Anthony Lynn Muller, P_E_
<br />Windows and Do orf', expiring on 04116215.
<br />4. Notice of Acceptance No.18-1106.11 issued to Vision Extrusions Limited for their Series
<br />?. Glazier complies with ASTIME1300-04, -09, -12 and -16.
<br />"VE 1000 Tan 202 and fighter shades (lticrlr-t'Lhibtre) Rigid Cellular PVC Exterior
<br />�
<br />D. QUALITYQU.ALITY ASSUIL NCE
<br />F. SIATE3IENTS
<br />Eztausioas for Windows and Doors". expiring on 112WN.
<br />Miami -Dade Departmtnt of Regulatory and Economic Resources (RER).
<br />1. Statement letter of conformance to FBC 7$ Edition (2020), dated 04, ,20. issued by
<br />0-
<br />maunfacttu�r, signed and seabed by Anthony Lynn Miller, P.E.
<br />F. STATE.�iENTS
<br />E. NLXTER AL CERTIFICATIONS
<br />2. Statement letter of no financial interest and of independent. issued by manufacturer, dated
<br />i_ St.ateramt letter of conformance to FBC 7e Edidou (2020), dated 0101,21. issued by
<br />CU
<br />1. Notice of Acceptance No.19-030a.42 issued to Kuu-arayl• . nneiica, Inc. for their
<br />04/18��0, signed and sealed by Anthony Lynn Miller, P_E_
<br />> fachm, signed and sealed by Anthony Lytm Mid, P_E.
<br />�
<br />"Trosifolll' Ultr, aclear, Clear, and Color PTB Glass Interhyers", expiring on
<br />3. Private Labeling Agent docdrmml between PGT. dated 03WI5 and signed by all
<br />2_ Private Label A,greenxmt dated 03; i09,21 between PGT Industries, Inc. and CGI
<br />�J
<br />CU
<br />07/08,a24_
<br />involved parties.
<br />Windows and Dooms Inc.,, signed by Dean M. Ruank, F.E., V.P..Engineering, on behalf of
<br />U
<br />m
<br />2. Notice of Acceptance No.17-0803.02 issued to K,uu gray America, Inc. for their
<br />bath companies-
<br />"SrentryGlas (Clear and T4'3ite) Glass late layers", mpiting on 07.r04J23.
<br />G. OTHERS
<br />0-
<br />3- Notice of Acceptance No. 18-1106.10 issued to Vision Extrusion's Limited for their
<br />1. This NOA re -vises NQA# 17-0420.06 (PVTw,rCGI) and updates to FBC2020 (7A Edition),
<br />G. OTHERS
<br />�
<br />"Brown Coated (Painted or Laminated) White Rigid PVC Exterior Extrusions
<br />expiring 0+21?21.
<br />1_ This NOA revises & renews NO 20-0429.05 (PLA w/CGI), expiring 04t 14,26.
<br />for Windows and Doors", expiring on 09 30.,24.
<br />2. R.ER Test proposals #19-1155 dated 01/10,20 approved by Ishaq i_ C:handa. PE. expiring
<br />2. The cummt associated PLA CGI isle #21-0245.01, expiring 04114.26.
<br />O
<br />�
<br />4. :'Motive of Acceptance No.18-1106.11 issued to Vision Extrusions Limited for their
<br />04A*21 _
<br />w
<br />series "VE 1000 Taus 202 and Miter shades (- on- I lute) Rigid Cellular PVC
<br />Exterior Extrusions for Windows and Doors , expiring on 12,'29t21. �
<br />�
<br />lshag L Cttanda, P.E.
<br />�
<br />Ishaq L P.E.
<br />�
<br />¢ N
<br />Z
<br />t:'banda,
<br />J
<br />Ishaq L Chanda, P.E.
<br />Product Control Unit Superrisor
<br />Product Control L'nit Supervisor
<br />Z
<br />Product Control Unit rauperrisor
<br />XOA No. 214206.03
<br />NtlA No. 21-0205.03
<br /><
<br />NOA No. 21-020+,03
<br />Expiration Date: April 14, 20M
<br />Expiration Dade: April 14,1026
<br />.J
<br />Expiration Datet April 14, 2026
<br />Approval Date: March 2a, 2021
<br />Approval Date; Alarth 26, 2021
<br />CL
<br />.Approval Date: Afarth 26, 2021
<br />E -6
<br />E -6.
<br />SHEET
<br />N0.
<br />E a
<br />March 6, 2023
<br />PA 1.4
<br />
|