|
MlAMM l6I OU-BADE COUrNrir
<br />ram PR0DrC1rco!*rrROL sKC1r10K
<br />11805 SW 26 SueeS Roomy 308
<br />DETARTNEMOF REGULATORY AID}ECONONKIC RESOURCES taER) ?.dam. F±los*U 33175-3474
<br />BOARD AND CODE ADMLtiSTRATIONDIVIS10*I 1• (7W HS-2590 F CM) 315-25"
<br />_NOTICE OF ACCEPTA.NC:E (NOA) wsnesia.;raaaswle<enanzs
<br />PGT Iadustries, Inc.
<br />1070 TechnoloLy Drh-e,
<br />North Venice, FL 3#275
<br />SCOPE:
<br />This NOA is being issued under the applicklemles and regulations governing the use of constnrctKamaterials. The
<br />documeatation submitted has been re-6euured and accgked "by hiiami-Dade CoutdyRER -Product Control Section to
<br />be used in Matl:i Dade Coody and odor areas where: allowed by the Auharity Havmg 7 (
<br />This NOA shall not be valid after the expiration date statedbelow-TheMiami-Dade County Product Control Section
<br />(Its ?Nunn Dade Courtly) an&orthe AEI (in areasodus thanMiami Dade Cxmmuty) reserve the right to have this
<br />product or mmerial kestedfor quality awn amepugwsm. If this product or material fails to petfounin the accepted
<br />manner, themamnar3usw will incurtheexpense ofsuch testing, and theAHUmayimmediatelyrevole,modify,or
<br />suspend lase use of such product or material within their jurisdiction. RER reserves the right to revoke this
<br />acceptance, if it is determined byNfiami-Dade County Product Control Section tasat this product or mil fails to
<br />meet the requi anents of the applicable building code.
<br />This product is approved as described heseinandhas been designed to comply with the Florida Balloting Code.
<br />including the High Vey HntricMe Zotre
<br />DESCRIPTION: Series "55M.770" Vinyl Sliding Gla ss Door (Reinforced) w/wo 900 & 13.0 corners-L ML
<br />APM017.4L DOCUMENT: Drawing No.'_1iD-5570A RerR, tithed "Vinyl Sliding Glass DoorNOA (LM)", sheets
<br />1 through 21 of 21, preparedby mane acturer; dated 10-10M 5 and last revised on (P-/01121, signed and sealed by
<br />A_ Lynn Miller, P.E.. bearing the N iumi-Dade County -Product Control Revision damp with the Notice of
<br />Acceptance number and expiration date by the Miami -Dade County Product Comol Section.
<br />AIISSiLE LMPAC'i R M, G: Large and Small?�sile Impact Resistant
<br />T12nitations:
<br />1. See table l (sheet 7) and table 2 (sheet, for applicable SGD unit sir, design pressures, reinforcements types.
<br />glass types, sill riser (see tables B-1 & B-2 streets 7-8) and anchor layout streets regnuanents in 1 l thou 16.
<br />2. R.sgsd White PVC, Tan (Non -white) Rigid PVC and Brown coated (Paraded or lamsnRted) white R*,d PVC to be
<br />labeled per referenced NOA's requirements.
<br />3 . Egress operable dons mast com4y with min clear width or height per FBC requirement as applicable.
<br />4. Pocket walls under separate approval,. to be reviewed by Building official
<br />L ABELL+tG: Each unit shall bear a permanent label with the mum &ctuves's name or logo, city. state and series and
<br />following statemient'Maori-DadeCounty Product Control Approved",noted heaeux
<br />RENEWAL of this NOA shell be considered after a real apphration has been filed and there has beenno
<br />change in the appticabiebuxildmg code negatively affecting the perfortuance of this product_
<br />TER11D ATION of this NOA will occur after the expiration date or if there has been a revisim or change in the
<br />materials, use. ancl'or m armf9rtm• of the product or process. Misuse of this NOA as an endorsement of any product,
<br />for sales, advertising or any otherpurposes shall automatic ally terminate this NOA. Failure to complywith any
<br />section of this NOA AA be cause for termination and removal ofNOA.
<br />A DVERTZSUME't'T: The NOAnumber precededby the aids Nfiami-Dade County Florida. and folUmed by the
<br />expiration date maybe displayedinadvatisingiiteratme- If amyponionoftheNOAisdisplayed, then itshall be
<br />done in its entirety.
<br />LN SPECTTON : A copy of this entire NOA shall beprovided to the user bythe mainifiactuier or its distributors and
<br />shall be available $car inspection at the job site at the rerqumt of the Building Official.
<br />This NOA revises & renews'+iOA420-0429.05 and consists of thispage 1 and e-vidence pages E-1. E-2, E-3 E-4,
<br />E-5 & E-6 as well as approval document mentiomed ab(mre_
<br />The submitted documentation was reviewed by Ishaq I CTranda, PE.
<br />I A. No. 21-0205.03
<br />t Expiration Datec April 14, 2026
<br />Approval Data:Marek 25,1011
<br />Pago 1
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUB-WTTED
<br />2. Evidence Submitted under previous submittal
<br />A. DRAWINGS
<br />1. Drawing No. AID-5570.0 Rer W titled `Vinyl Sliding Glass Door NOA W-, sheets
<br />1 through 21 of 21. prepared by manufacturer. dated 10,05115 and last m°ised on
<br />04,122/20, signed and sealed by A- Lynn Miller, PE_
<br />B. JESTS
<br />1. Test reports on: 1) Air Infiltration. Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Psessum Test, Loading per FBC, TAS 20294
<br />3) Water Resistance Test. per FBC. TAS 202-94
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Ptrem a Loading per FBC. TAS 203-94
<br />along withmarlmdup drawings and installation diagram ofall PGT Industries, Inc.
<br />representative units: listed below and tested to qualify Dowst"l 791 and. Dowsil 993 mhconnes.
<br />prepared by Fenestration Testing Laboratory, Inc.. Test Reports No.:
<br />FTL-7897, PGT PW5520 PVC Fixed Window (unit 6 in proposal), dated 09iD3114
<br />F IL-20-2107.1, PGT SGD780 Alumirman Sliding Glass Darr (unit 7 in proposal) FTL-20-
<br />2107.2, PGT CA740 Ahem Outswing Casement Window (unit 8 in proposal) FTL-20-
<br />2107.3, PGT PW7620A Aluminum Fixed Wmdow (unit 9 in proposal) and FTL-20-2107A.
<br />PGT P`W7620A Aluminumn Fixed Window (unit 10 in proposal) dated 07113/20, all signed
<br />and sealed by Idalmis Ortega. F.E.
<br />C. CALCULATIONS
<br />1. Anchor verification calculations and structural analysis, compy) 1g with FBC 71k
<br />Edition (2020k dated W-2120, pied by manufacturer_ signed and sealed by
<br />Anthony Lynn Miller: P.E_
<br />2. Glazing cotmlpbes with ASTMI E1300-04, -09, -l2 and -16.
<br />D. QUALITY A.SSURA CE
<br />Miami -Dade Department of Regulatory .and Economic Resources (RER).
<br />E. MATERIAL CERTIFICATIONS
<br />1. Notice of Acceptance No.19-03tri.02 issued to Kurarar America, Inc. for their
<br />"Trosifolt- Ultzaclear, Clear, and Color PVB Glass Interlayers-. expiring on
<br />07/%24.
<br />2. Notice of Acceptance No.17-080&02 issued to Kurarar America, Inc. fortheir
<br />"SentryGhl . (Clear and AVIlite) Glass Inorlarer,�', expiring on 07. N4n3.
<br />3_ Notice of Acceptance No. 18-1106.10 issued to Vision Extrusions Limited for their
<br />`Blown Coated (Painted or Laminated) Ni'hbe Rigid PVC Exterior Extrusions
<br />for Windows and Doors", expiring on. 09/30.124.
<br />4. Notice of Acceptance No.18-1106.11 issued to Vision Extrusions Limited for their
<br />series `'VE 1000 Tan 202 and Fghterr shades (No"like) Rigid Cellular PVC
<br />Exterior Extrusions for Windows and Doers7. expiring on 12,"29t2I.
<br />1s1►agL CLands, P.E.
<br />Product Control trait Supervisor
<br />NOA No. 21-0209.03
<br />Expiratioa Date: April I4, 2026
<br />?Approval Date: march 25, 2021
<br />E -4
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPT JUN CE: EVIDENCE SUBhflTTED
<br />1. Evidence submitted under previous 0_4
<br />A. DRAWINGS
<br />1_ Manufachmes die drawings and sections.
<br />(Submitred under 10A. o.11.-0107 04)
<br />2. Drawing No. MD-5570.0, titled "Vinyl Sliding Glass Door NOA ', sheets 1
<br />through 21 of 21, prepared by mufaclturr, dated 10105f15, with revision A dated
<br />04105/17, signed and sealed by A. Lynn Mier, P.E.
<br />B. TESTS
<br />1_ Test report on 1) Uniform Static Air Pie Test, per FBC, TAS 20244
<br />2) Large Missile Impact Test per FBC. TAS 201-94
<br />3) Cyclic Wind Pressure Loadingper FBC, TAS 203-94
<br />along with marlmd-up drawings and installation diagram of vinyl sliding glass door' prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FTL 9717. dated 12A)7115, signed and
<br />sealed by Idalmis Ortega, P_ E. (Test report revised on 02/15116 and 0224`l6)
<br />2. Test report on 1) Air Infiltmtion Test,. per FBC. TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC, TAS 2Q-94
<br />3) Water Resistance Test, per FBC, TAS 202-94.
<br />4) Large Missile Impart Test per FBC, TAS 201-94
<br />5) Cyclic Wind Prue Loading per FBC, TAS 20394
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along withmarked up drawings and inst-Ablion diagram ofvinyl sliding glass door.. prepared
<br />by Fenestration Testing Lab, Inc;, Test Report No. FTL 8546, dated I lAW15-
<br />signed and
<br />sealed by Idaink s Ortega, P_ E. (rest report revised on 01104116 and 02;11!2016)
<br />3, Test report an 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94
<br />4) Large Missile Impact Test per FBC, TAS 20194
<br />5) Cyclic Wired Pressutre Loading per FBC, TAS 203-94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along with madoed-up drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No_ FTL &1547, dated 12/(WI5. signed and
<br />sealed by Idalmuis Ortega, P. E. (rest report revised on 0211516)
<br />4. Test report on. 1) Air Infiltration Ted, per FBC, TAS 2(2-94
<br />2) Uniform Static Air Plessuir Test, per FBC, TAS 20294
<br />3) Water Resistance Test, per FBC, TAS 20294
<br />4) Large Mmile ImW Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along with markedup drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FTL 85v18, dated 12104115, signed and
<br />sealed by Idalmis Ortega, P. E. (Test report revised on 0104116 and 02111116).
<br />Wail L Chaads, P.E.
<br />Product Control twit Supervisor
<br />NOa Na. 21-0105.03
<br />Expiration Datr. April I4, 2026
<br />approval Date: ,lurch 25, 2021
<br />E -1
<br />CGI Windows and Doors, Inc.
<br />NOTICE OF ACCEPTXNCE: EVIDENCE SUBMITTED
<br />E. MATERIAL CERTIFICATIONS (continuer)
<br />5. Quanex Part Super SDace►r Standard complying with, 4STM C518 IhcmW Conductivity
<br />0.881 BTU -in/ hr_-#tom -', ASIM F 1249 Wt M Pass= ASTM D3985 Oxygen —Pass, ASTM E
<br />2190I.G_Du ability -No Fog -Pass. ('.Submtkird tenderprecious X0.4 )IIc+ IM409.05)
<br />6. Quanex Part Duraseal complying with ASTl1,i C519 lbennal Conductivity 222 BTU4n.!
<br />hr- F-°F, ASTM F 1249 W`VM Pass, ASTM D 1434 Argon Per a -Pass, ASTM E
<br />2189 I.G_ Durability -No Fog, ASTM E 546 Dew Point Devekgnmmt 201F in 48 his.
<br />(Submitted under YO4X& IS-0 0.OS).
<br />7. Vision Fps. Ltd. Parts corqplyitlg with PVC-AAMA 303-13, Voluntary Specification
<br />for Rigid Polyvinyl C7nlonde (PVC) Exterior Profiles for Vision Extrusions, Ltd.-VEX-1 by
<br />AAMA Fenestration Exterior Profile Ce ation Program. (Subffiftrd under.'VO.4 Na 15-
<br />0409. #5)
<br />8_ Visimi Extrusions, Ltd_ Parts complying with PVC AAIuLL 303-13_
<br />fSubntitt`ed tinder X0 4 No.1 5-0409 05)
<br />9_ PVC-AAMA 303-13, Vohmtary Specification for Rigid Polyvinyl Chloride (PVC) Exterior
<br />Profiles for Vision FVnwons, Ltd.-VEX-1 by AAMA Fenestration Exterior Profile
<br />Certification ProgrML
<br />10. Notice of Acceptance No_ 18-1217.14 issued to Energi Fenesitration Solution, USA. Inc_ for
<br />their `-Ian 3040 &light shade (non -white) NwlWte Rigid PVC: Exterior Extrusions for
<br />Windows and Doo&', expiring on02/04,21.
<br />11. Notice of Acceptance No. 18-0122.02 issued to Energi Fenestration Solution, USA, Inc- for
<br />their se•ties -Witte Rigid PVC Exterior Extrusions for Windows and Donis'', expiring on
<br />02t28t23_
<br />12_ Notice of Acceptance No_ 2"203.03 issued to Energi Fenestration. Solution, USA. Inc_ for
<br />their ``T3roaze & light shade cap coated 'White Rigid PVC Exterior Extrusions for
<br />Windows and Doors", expiring out 04116,25.
<br />F. STATEMENTS
<br />1. Statement letter of conformance to FBC 76 Edition (2020), dated 04,22-20. issued by
<br />nlanlufactttrer, signed and sealed by Anthony Lynn Miller, PE.
<br />2. Statement ie~. er of no fmaticul interest and of independent, issuers by manufacturer, dated
<br />04/18/20, sued and sealed by Anthony Lynn Miller, P.E.
<br />3. Private Labeling Aft document between PGT, dated 03 30f 15 and signed by all
<br />involved parties.
<br />G. OTHERS
<br />1. This NOA revises N 01i817-0420.06 (PVTw/CGI) and updates to FBC2020 Edition),
<br />expiring 04r02len
<br />2- RER Test proposals #19-1155 dated O L 10#20 approved by Ishaq I. Chanda_ PE- expiring
<br />04114021-
<br />E -5
<br />Ishaq L Gtmada, P.E.
<br />Product Control Unit Supervisor
<br />IN 0,A No. 21-020S.03
<br />ExpirationDatt: April14,2026
<br />Approval Da to: Afarek 2 ,1011
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
<br />B. TESTS (continued)
<br />5. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Unifomi Static Air Pressure Test, per FBC, TAS202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94.
<br />4) Large Missile Impact Test per FBC, TAS 20194
<br />5) Cyclic Wind Presme Loadingper FBC, TAS 203-94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along with rnarlmd-up drawings and installation diagram of vinyl diding glass door, prepared
<br />by Fenestration Testing Lab_ Inc., Test Report No FTL 8549, dated 11.tM5, signed and
<br />sealed by Idalmis Ortega, P. E_ (rest report revised on 12/04/15 and 0211116)
<br />6- Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Presses Test, per FBC. TAS 202-94
<br />3) Water Resistance Test. per FBC, TAS 202-94.
<br />4) Large Missile Impact Test per FBC, TAS 20194
<br />5) Cyclic Wind Pry Loadingper FBC, TAS 203-94
<br />along with ruklmdup drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestratim Testing Lab, Inc., Test Report No. FTL 8552, dated 12,DV15, signed and
<br />sealed by Idalmis Ortega, P. E. (rest report revised on 02115.2016)
<br />7. Test report on 1) Umfvnn Static Air Ptessmc Test, per FBC. TAS 202-94
<br />2) Large Missile Impact Test per FBC, TAS 201-94
<br />3) Cyclic Wind Pry Loading per FBC. TAS 203-94
<br />along with marked -up diawmgs and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab. Igo., Test Report No. FTL 6638 (samples A-1 thru A-22), dated
<br />11 /19110, signed and sealed by Jorge A_ Causo, P. E. (Submf led under N'0. IV& 11-
<br />0107 04)
<br />8 Test report on 1) Air Infiltration Test, per FBC, TAS NP-44
<br />2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94-
<br />4) Large Missile IuVaact Test per FBC, TAS 201-94
<br />5) Cyclic %rind Pres=e Loadingper FBC, TAS 203-94
<br />6) Forced Entry Test. per FBC, TAS 202-94
<br />along withmarloed-pp drawings and installation diagram of vinyl sli mg glass door, prepared
<br />by Fenestration Testing Lab, Inc- Test Report No-FTL 6337 (samples A-1 thru A-5), dated
<br />1210 40, signed and sealed by Jorge A- Canso, P. E_ (Submirxed under AWA X6.11-
<br />0107 09)
<br />C. C AL C7_ LA11ONS
<br />1- Anchor verification calculations and structural analysis, comply -mg with FBC-2414,
<br />pied by PGT; dated 1109115and last revised on 01115116, signed and sealed by
<br />AnthonyL. Miller, P.E. (Submbiled undrr.Y, OAAe.151210.01).
<br />2. Glazing complies with ASTME-13W-09.
<br />Ishaq L Chanda. P.E.
<br />Product Control fait Supervisor
<br />NDA No. 21-020-9.03
<br />Expiration Date; ,April 14, 2026
<br />Approval Date: 'Nfarci 25, -n21
<br />£ -2
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE StBMITTEI}
<br />3. New Evidence Submitted
<br />A. DRAWINGS
<br />1. Drawing No. hiD-5570.0 Rev B, titled -`Vinyl Sliding Glass DoorNOA (Elul)", sheets 1
<br />through 21 of 21, prepared by manufacturer, dated 10105/15 and last revised on 020L21_
<br />signed and sealed by A- Lynn Miller, P.E.
<br />Note: This revision consists replacement of same existing installation screw with flat head_
<br />B. TESTS
<br />1. Nome_
<br />C. CALCULATIONS
<br />1_ None-
<br />D. QUALITY ASSURANCE
<br />1. made Department of Regulatory and Economic Resources (RER).
<br />E. MATERML CERTIFICATIONS
<br />1_ Notice ofAcceptance No.19-0305.02 issued toKurarati America, Inc. fords&
<br />"Trosifolt Ultraclear, Clear, and Color PVB Glass Interlayers", expiring on 07%24_
<br />2. Notice ofAcceptance No.17-0808.02 issued to KuraraF America, Inc. for their
<br />"SentiTGlast- (Clear and Rite) Glass Interlayen", npiring on 07i04123.
<br />3_ Notice ofAcceptaace No.18-1106.10 issued to Vision Extrusions Limited for their `Brown
<br />Coated (Painted or Laminated) AWte Rigid PVC Exterior Extru ons for Windows
<br />and Doors". expiring on 09.3OPM.
<br />4. Notice ofAcceptance No.18-1106.11 issued to Vision Extrusions Limited for their series
<br />"VE 1000 Tan 202 and lighter shades (ikon -Al lee) Rigid Cellular PVC Exterior
<br />Extrusions for Windows and Doors7_ expiring on 12/29121.
<br />F. ST ATEMEINTS
<br />1_ Statement letter of conformance to FBC 70 Edition (2020), dated 02/01,21. issued by
<br />n32n11.fact1=, signed and sealed by Anthony Lynn Miller, P-E.
<br />2. Private Labeling Agreement dated 03109;21 between. PGT Industries: Inc. and CGI
<br />Windows and Doors Inc., signed by Dean M. Rumt P.E., V.P. Engineering, on behalf of
<br />both omVanics.
<br />G. OTHERS
<br />1_ This NOA revises & renews NflA# 20-0429.05 (PLA w1CG1), expiring 041140.6.
<br />2. The eu irmt associated PLA CGI fire ##21-0205.01, expiring 04/14,26.
<br />F -6
<br />Ishaq L Ganda, P.E.
<br />Product Coetf3 Unit Supervisor
<br />Nt1A No, 21-0205.03
<br />Expiration Date: April 14, 2026
<br />Approval Date: Mareli 25.101.1
<br />PGTladnstries, Inc.
<br />NOTICE OF AC'CEPTA3NvICE. EVIDENCE SUBAUFTED
<br />D. QUALM ASSURANCE
<br />L Maud Dade Department of Regulatory and Economic Resources (RER)-
<br />E. MATERLAL, CERTIFICATIONS
<br />1. Notice of Acceptance No. l_,-0528.14 issued to Vision Extrusions Limited for their
<br />White Rigid PVC Exterior Extrusions forWindows and Doors'. dated 0813/15.
<br />VqM Big on 09! 0.119.
<br />2. Notice of Acceptance No.16-0920.09 issued to Vision Extrusion Limited for their -` 7E
<br />1000 Tan 202 and lighter Shades Qion-4Vhire) Rigid PVC Exterior Extrusions for
<br />Windows and Doors", dated 120116. expiring on 12129f2.L
<br />3. Notice of Acceptance No.15-0528.15 issued to Vision F-vmsion Limited for their
<br />"Brown Coated (Painted or Laminated) '%lite Rigid PVC Exterior Extrusions for
<br />CI'mdows and Doors", dated 08/13/15, expiring on 0913039.
<br />4_ Notice of Acceptance No_ 16 4712.02 issued to ENERGI Fenestration Solutions USA,
<br />Inc. for their `TAN 3040 and Lighter Shades (Non-AWn) Rigid PVC Exterior
<br />Extrusions for Windows and Doors" dated 09115116- expiring on 0.104r21.
<br />5. Notice of Acceptance No_ 16-0712.04 issued to ENERGI Fenestration Solutions USA,
<br />Inc. for their "Bronze and Lighter Shades of Cap Coated Rigid P`V C Exterior
<br />Extrusions for Ri mdows and Doors" dated 09115116, expiring on 04116t20.
<br />6. Noce ofAcceptance No-16-0712.03 issued to ENERGI Fenestration Solutes USA,.
<br />Inc. for their -White Rigid PVC Exterior Eu sions fire R°indows and Doors" dated
<br />08110117, expiring on 0129118.
<br />7_ Test rrpofts No(s). 10-002-792(A), 10-06-MO527, 535753-09. per ASIME44,
<br />ASTND 1929 and ASTMII-6351. issued by EXOVA to Vision Extrusion for cellulosic
<br />composite material.
<br />(Submitted under AAA X& 11-0107 04)
<br />8_ Notice ofAcceptance No.14-0916.11 issued to Kuraray America_,. Inc. for their
<br />"Seam Glasg, (Clear and White) IDteriacer", expiring on 07/04/18.
<br />9. Notice ofAcceptance No.16-11.17.01 issrled to Keay America, Inc_ for their
<br />-'Trw9olt TAtraclear. Clear and Color PZ'B Interla rers7. ertpiiirlg on 07*8119.
<br />F. STAT1111ENTS
<br />1- Statement later ofconformance withFBC-St%Edi&n (2014) and FBC4*Edidon
<br />(2017j, issued by manufacttirel; dated 08t14117, signed & sealed by Lynn Miller. P.E_
<br />2- Statement letter ofno financial intered. dated 0411&17, issued by manufacttim, signed
<br />& sealed by Lynn Miller, Par.
<br />3. Letter of lab cawpliaance, part of the above test reports.
<br />4. RER Test Proposal No.17-0387, dated 05,105117, signed by Ishaq Chanda. P.E.
<br />G. OTHER
<br />1. Notice ofAcceptance No. 15-1:21 Lott sued to PGT Industries, for their Series
<br />557012770" Vinyl Sliding Glass Door (Reinforced) L.ALL", miring on 04/14/21 _
<br />E �3
<br />Ishaq L Chaada, PX.
<br />Product Control trait Supervisor
<br />NOA No. 21.0205.03
<br />Expiration Date: April 14, 2026
<br />Approra 1 Date: '3rarch 15, 2021
<br />O
<br />N
<br />L
<br />Cn
<br />_
<br />>
<br />U
<br />L
<br />O
<br />2=
<br />N
<br />O-
<br />ca
<br />O
<br />-v�
<br />.�
<br />V
<br />4-
<br />C
<br />a
<br />O
<br />O
<br />.O
<br />N
<br />=
<br />O
<br />U_
<br />-0
<br />O
<br />O
<br />O
<br />.cn
<br />L
<br />Q
<br />CU
<br />C
<br />4-
<br />0-
<br />-0
<br />._
<br />Cn
<br />Q
<br />W
<br />J
<br />i
<br />co
<br />O
<br />CL
<br />iL
<br />Q
<br />SHEET NO.
<br />PA 1.4
<br />March 6, 2023
<br />
|