|
i I -1— II' —' L-1-1 I I I I I I _ - -..I ' III 11 I I - I I _ I I. I I 1 11 1 1 L I
<br />FL # FL10124-R20
<br />Application Type Revision
<br />Code Version 2017
<br />Application Status Approved
<br />Comments
<br />Archived
<br />Product Manufacturer GAF
<br />TRINITY ERD
<br />TRINITY ERD
<br />Address/Phone/Email 1 Campus Drive
<br />EXTERIOR RESEARCH & DESIGN, LLC.
<br />Certificate of Authorization #9503
<br />ROOFING SYSTEMS EVALUATION:
<br />Entity Examination Reference Date
<br />Parisppany, NJ 07054
<br />v 353 CHRISI TAN STREET, UNiT #13
<br />-NIT ERD
<br />Or (TST 1740) ASTM D3161, D3462 09CA10592 03/26/2009
<br />ui. (TST 1740
<br />(800) 766-3411
<br />I OXFORD, CT 06478
<br />1. SCOPE:
<br />ASIM D3161, D3462 09CA06856 05/15/2009
<br />mstieh@gaf.com
<br />PHONE: (203) 262-9745
<br />Product Category: Roofing
<br />UL (TST 1740) ASTM 03161, D7158, D3462 09NK06647 08/01/2009
<br />UL (TSi 1740) ASTM D3161, D7158, D3467 09C'A27281
<br />FAX: (203
<br />EVALUATION REPORT ) 267 9243
<br />Sub -Category: Asphalt Shingles
<br />08/27/2009
<br />UL (TST 1740) ASTM D3161, D71.58, D3462 IOCA35554 03/05/2010
<br />Authorized Signature Robert Nieminen
<br />GAF
<br />Compliance Statement: GAF Asphalt Roof Shingles, as produced by GAF, have demonstrated compliance with the
<br />UL (TST 1740) ASTM D3161, D7158, D3462 IOCA13686 OS/1.5/2010
<br />Ilndareith@trinftyerd.com
<br />Evaluation Report 01506.01.08-R21
<br />1 Campus Drive
<br />following sections of the Florida Bolding Code and Florida Building Code, Residential Volume through testing in
<br />UI.(IS T 1740) ASTM D3462 10CA07264 05/27/2010
<br />UL (TST 1740) ASTM D3462
<br />Technical Representative William Broussard
<br />FL10124-R19
<br />Parsippany, N.1 07054
<br />accordance with the following Standards. Compliance is subject to the installation Requirements and Limitations /
<br />10CA11953 10/79/2010
<br />UL (Isr 1740) ASTM D3161, 07158, D34G2 IONK11951 10/3U/2010
<br />Date of Issuance: ol/03/2008
<br />Conditions of Use set forth herein.
<br />UL (TST 1740) ASTM D3161, 07158, D3462 1ONK12070 11/04/2010
<br />Address/Phone/Email 1 Campus Drive
<br />Revision 21: 08/26/2016
<br />SCOPE.
<br />2.
<br />UL (TST 1740) ASTM D3161, D7158, D3462 08CA06100 01/30/2010
<br />Parsippany, 07054
<br />STANDARDS:
<br />01. (TST 1740) ASTM D3161, D/158, D3462 IOCAS3934 03/31/2011
<br />1
<br />(S00) 766-3411
<br />This Evaluation Report is issued under Rule 61G20 3 and the applicable rules and regulations governing the use of
<br />Section Property Standard Year
<br />UL (iST 1740) ASTM D3161, D7158, D3462 IICA48924 10/22/2011
<br />TechnicalQuestionsGAF@gaf.com
<br />construction materials in the .State of Florida. The documentation submitted has been reviewed by Robert Nieminen,
<br />1507.2.4, R905.2.3 Physical Properties ASTM 01970 2g09
<br />UL (TST 1740) ASTM D3161, D7158, D3462 11CA47919 10/22/201.1
<br />Quality Assurance Representative
<br />P-E. for use of the product under the Florida Building Code and Florida Building Code, Residential Volume. The
<br />150/.2.5, R905.2.4 Physical Properties ASTM D3462 2(X)9
<br />UL (rsr 1700) ASTM D3161, D7t58, D3462 11CA48408 12/03/201.1
<br />UL (TST 1140) ASTM D3161, D7158, D3462 IICA48125
<br />products described herein have been evaluated for compliance with the 5" Edition (2014) Florida Building Code
<br />1507.2.7.1, R905.2.6.1 Wind Resistance ASTM 03161 2009
<br />12/09/2013
<br />UL, LLC (1 S f 9628) ASTM D3462 12CA34891 10/12/2012
<br />Address/Phone/Email
<br />sections noted herein.
<br />15g7.z.7.1, R9o5.26.1 wind Resistance ASTM D7158 2008
<br />11L, LLC. (TST9628) ASTM D3161, 07158, U3462 12CA58151 02/15/2013
<br />Category Roofing
<br />DESCRIPTION: GAF Asphalt Roof Shingles
<br />1507.2.7.1, R905.2.6.1 Wind Resistance iAS 107 1995
<br />LIT Lc (TST 9628) ASTM D31bl 12CA38083 02/26/2013
<br />UL, LLC.(TST 9628) ASTM D3161
<br />Subcategory Asphalt Shingles
<br />3. REFERENCES:
<br />13CA32332 06/18/2013
<br />UL, LLC. (TST 967R) ASTM D3161 13CA37934
<br />Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed
<br />LABELING: LabelingY
<br />shall be in accordance with the requirements the Accredited Quality Assurance
<br />Entity. Examination Reference Date
<br />08/02/201.3
<br />UL, I LC. (TST 9628) ASTM 03161, D7158, D3462 4/86875675 07/11/2015
<br />UL, I.I.C.(TST
<br />Florida Professional Engineer
<br />Agency
<br />A enc noted
<br />herein.
<br />GAF (PDM 1915) Letter of Equivalency Seal -A -Ridge Impact Resistant IR 01/13/2012
<br />9628) ASTM D3161, D7158, D3462 47874:34542 0 ,/17/2016
<br />UL, LLC (QUA 9625) Quality Control
<br />(�
<br />CONTINUED COMPLIANCE: This Evaluation Report is valid until such time
<br />PRI (TST 5878) Physical Properties GAF-025-02-01 03/27/2002
<br />Inspection Report, R21, Mobile, AL 12/28/2015
<br />UL, I LC. (QUA 9625) Quality Control Inspection Report, R21, Myerstown, PA 02/23/2016
<br />Evaluation Report -Hardcopy Received
<br />as the named product(s) changes, the
<br />referenced Quality Assurance documentation changes, or
<br />PRI (1ST 5878) ASTM D3462 GAF-059-02-01 09/02/2004
<br />UL, LLC. (QUA9625) Quality Control Inspectiun Report, R21, Tuscaloosa, AL W126/2016
<br />Florida Engineer or Architect Name who Robert Nieminen
<br />provisions of the Code that relate to the product change.
<br />Acceptance of this Evaluation Report by the named client constitutes agreement
<br />PRI (TST 5878) ASTM D3462 GAF-080-02-01 05/25/2005
<br />PRI (TST SR/8) Physical Properties
<br />01, I -LC. (QUA 9625) Quality Control inspection Report, R21, Michigan Cry, IN 03/02/2016
<br />UL, LLC (QUA 9625)
<br />developed the Evaluation Repo
<br />Report
<br />to notify Robert Nieminen, P.E. if the
<br />product changes or the referenced Quality Assurance
<br />GAF-324-02-01 12/01/2011
<br />PRI 5878)
<br />Quality Control Inspection Report, R21, Shatter, CA 02/18/201.6
<br />UL, IAC (QUA 9625) Quality Control
<br />documentation changes. Trinfty j ERD requires a complete
<br />(TST Wind Driven Rain GAF-407-02-01 01/21/2013
<br />Inspection Report, R21, Savannah, GA 02/24/2016
<br />Florida License PE-59166
<br />review of this Evaluation Report relative to updated Code requirements with each Code Cycle.
<br />UI. (TST 1740) ASTM D3462 93NK629S 11/29/1993
<br />UL, LLC. (QUA 9625) Quality Control Inspection Report, R21, Minneapolis, MN 02/09/2016
<br />Quality Assurance Entity UL LLC
<br />ADVERTISEMENT: The Evaluation Report number preceded by the words 'Trinity l ERD Evaluated" may be displayed in
<br />UL (TST 1740) ASTM 03462 99NK43835 01/12/2000
<br />111, I.I.C. (QUA 9625) Quality Control Inspection Report, R21, Mt. Vernon, IN 02/09/2016
<br />UL, I I.C. (QUA 9625) Quality Control Inspectiun Report, i(21, Baltimore, MD
<br />Quality Assurance Contract Expiration Date 10/20/2018
<br />advertising literature. If any portion of the Fvaluation Report is displayed, then it shall be done in its entirety.
<br />UL (TST 1740) TAS 107 94NK9632 03/29/2000
<br />UL (Tsr 1140) ASTM D3462 OINK06632
<br />03/01/2016
<br />UL, I.I.C. (QUA 9625) Quality Control Inspection Report, R21, Tampa, fL 02/29/2016
<br />ValidatedBy ]oho W. Knezevich, PE
<br />INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or
<br />02/02/2001
<br />UL (TST 1740) ASTM D3161, TAS 107 01NK9226 05/21/2001
<br />UL, LLC. (UUA 9625) Quality Control Inspection Report, R21, Dallas, TX 02/17/2016
<br />UL, LLC. (QUA9625) Quality Control inspection Report, R21,
<br />its distributors and shall be available for inspection at the job site at the request of the Building Official_
<br />UL (TST 1 /40) ASTM D3161 01NK37122 12/18/2001
<br />Ennis, IX 02/03/2016
<br />UL, I.I.C. (QUA 9625) Quality Control Inspection Report, R21, rontana, CA 03/03/2.016
<br />�
<br />Validation Checklist -Hardcopy Received
<br />This Evaluation Report consists of pages 1 through 6.
<br />ul (TST 1740) ASTM U3462 O1NK37122 12/19/2001
<br />UL (TST 1740) ASTM D3161, TAS 107 02NK12980 04/lU/2002
<br />4. PRODUCT DESCRIPTION:
<br />Certificate of Independence FL10P,20. COI 2017 01 COI Nieminen. f
<br />Prepared b
<br />P Y�
<br />UL (TST 1740) ASTM D3161, TAS 107 02NK30871 09/09/2OD2
<br />UL
<br />4.1 Asphalt Shingles:
<br />.124 ..
<br />Referenced Standard and Year (of Standard) Standard Year
<br />a !'
<br />r *� `
<br />_ =
<br />(TST 1740) ASTM D3161 03CA5367 03/11/2003
<br />UL (TST 1740) ASTM D3462 03 N K26444 10/17/2003
<br />UL ) ASTM D3462 04NK13850 0G/07/2004
<br />4.1.1 Marquis' Weather Max', Royal Sovereign' and Sentinel' are a fiberglass reinforced 3-tab asphalt roof
<br />shingles.
<br />UL (TST 1740) ASTM 03161 04NK13850 06/23/2004
<br />4.1.2 Camelot , Camelot II, Fortitude,-, Glenwood'"", Grand Canyon', Grand Sequoia', Grand Sequoia' iR,
<br />ASTM D1970 2015
<br />- :--- ` °� IJ.=
<br />I's
<br />UL(ISI 1740) ASTM D3161 04NK30546 03/10/2005
<br />Grand Sequoia"' ArmorShield'"', Monaco"', Sienna'", Timberline' American Harvest", Timberline®
<br />ASTM D3161 201E
<br />- s .,
<br />Robert J.M. Nieminen, P.E. z" F" he tacumiie"alappearinewasaumonzraAVRoherttrienineri,
<br />UL(TST 1740) ASTM D3462 04NK22009 05/06/2005
<br />ArmorShield" II, Timberline' Natural Shadow', Timberline HD°, Timberline* Cool Series', Timberline Ultra
<br />Florida Registration No. 59166,Florida DCAANE19B3 •����•�� 1'.t.unoe/2e(zote This does notzerwasancicctronicallysigned
<br />UL(TST 1740) ASTMD3161 04NK22009 05/09/2005
<br />HD' and WoodlandtlD are fiberglass reinforced laminated
<br />g mutated asphalt roof shingles.
<br />ASTM D3462 2010
<br />document. signed.",Aiedhardropiechav been trans, ttpatothA
<br />V� UY tAppr lAdminl awr Anntpthe wiludc'llent
<br />CERTIFICATION OF INDEPENDENCE:
<br />UL (TST 1740) ASTM D34G2 OSNK77924 02/10/2006
<br />4.1.3 Slateline' is a fiberglass reinforced 5--tab asphalt root shingle.
<br />ASTM D7158 2011
<br />1. TrinitylFRD does not have, nor does it intend to acquire or will it acquire, financial
<br />UL (TST 1740) ASTM D3161 OSNK27924 02/11/2000
<br />4.2 Hip & Ridge Shingles:
<br />TAS 107 1
<br />a interest in any company manufacturing or
<br />d stnbuting products it evaluates.
<br />UL (TST 1740) ASTM D3161, D3462 06CA18077 06/05/2U06
<br />UL 1740)
<br />4.2.1 Seal -A Ridge' Ridge Cap Shingles, Seal-q-Ridge' IR Impact Resistant Ridge Cap Shingles, Seal
<br />Equivalence of Product Standards
<br />2. Trinity I ERD is not owned, operated or controlled by any company manutacturing or distributing products it evaluates.
<br />3.
<br />(TST ASTM D3161, D3462 06CA18074 06/16/2006
<br />UL (TST 1740) ASTM 1)3161, D3462 06CA35251
<br />-A -Rid e00
<br />g
<br />ArmorShield'" Ridge Cap Shingles and Timbertex' Premium Ridge Cap Shingles are fiberglass reinforced hi
<br />Certified By
<br />Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing ur distributing products for
<br />which the evaluation reports are being issued.
<br />10/18/2006
<br />UL (TST 1740) ASiM D3462 06CA31603 12/01/2006
<br />and ridge asphalt roof shingles. P
<br />4. Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
<br />UL (TST 1.740) ASTM D3161, D3462 06CA41095 12/27/2006
<br />UL (TST 1740) ASTM D3161
<br />product.
<br />07NK05228 03J13/2007
<br />Sections from the Code
<br />S. This is a building code evaluation. Neither Trinity )FRO nor Robert Nieminen, P.L. are, in any way, the Designer of Record for
<br />OL (TST 1740) ASTM D3161 06CA31611 04/04/2007
<br />Exterior Research and Design, I.I.C. Evaluation Report 01506.01.08-R21
<br />any
<br />project which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless stained
<br />UL (TST 1740) ASTM D3161 06CA61148 04/09/2007
<br />CertijKateof7tutharizatlonk9503 FL10124R19
<br />specifically for that purpose.
<br />UL (TST 1740) ASTM D3161, D3462 07CA31742 11/08/2007
<br />Revision 21: 08/26/2016
<br />UL (TS-1 1 /40) ASTM D3161, D7158, D3462 08CA06100 03/13/2008
<br />Page 3 of 6
<br />1.H (TST 1740) ASTM D31b1, D3462 07CA55908 04/01/2008
<br />Product Approval Method Method 1 Option D
<br />Exterior Research and Design, LLC. Evaluation Report 01S06.01.08-R21
<br />Certificate ofAuthorization #9503 FL10124-R19
<br />Revision 21: 08/26/2016
<br />Date Submitted 09/20/2017
<br />Page 2 of 6
<br />Date Validated 09/27/2017
<br />Date Pending FBC Approval 09/28/2017
<br />Date Approved 12/12/2017
<br />METAL DRIP EDGE AT RAKE
<br />APPLIED OVER UNDERLAYMENT
<br />150 ASPHALT FELT ROOF SHEATHING MAIL INTERIOR
<br />IINDERLAYMENT 8d MAILS (RINGSHA N) 6' O G
<br />ROOF SHEATHM NAIL 2 EDGES
<br />Ill NAILS (RDGSHANIO 4' O.C.
<br />METAL DRIP
<br />APPLIED
<br />OVER SHEATHING
<br />I [71
<br />-
<br />---- -
<br />--
<br />TRINITY ERD
<br />TRINITY ERD
<br />" �l "
<br />4A Accessory Starter Strips:
<br />4.3.1 Pro -Start" Eave/Rake Starter Strip Shingles and WeatherBlocker'" Premium Eave/Rake Starter Strip Shingles
<br />TRINI I 1 ERD
<br />6 .3.2 Fasteners shall be in accordance with manufacturer's published requirements, but not less than FBC 15072 ..E
<br />7. LABELING:
<br />7.1 Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted
<br />_ _
<br />T CEMENT Zo l� m 11 m II �
<br />fit
<br />are starter strips for asphalt roof shingles.
<br />or R905.2.5. Staples are not permitted.
<br />herein.
<br />I I
<br />kl I(
<br />-
<br />QuickStart Peel &Stick Starter Roll is a is amineral-surfaced, fiberglass reinforced, self -adhering SBS
<br />6.3.3 Where t
<br />ere he roof slope exceeds
<br />p s 21. units vertical in 12 units horizontal, special methods of fastening are
<br />7.2 Asphalt shingle wrappers shall indicate compliance with one of the required classifications detailed in FBC
<br />USE IDLY EN13" NAILS M HOLD It.
<br />UNDERLAYMENT IN PLACE UNTIL I ll
<br />modified bitumen starter strip, nominal 9-inch x 33 h roll, for use with asphalt shingles with exposure of 6-
<br />required. Contact the shingle manufacturer for details.
<br />Table 1507.2.7.1. / R905.2.6.1.
<br />SHD43LES ARE LAM I�
<br />li II I
<br />inch or less.
<br />6.4 Hip &Ridge Shingles:
<br />8. BUILDING PERMIT REQUIREMENTS:
<br />Tr
<br />4.3.3 StarterMatch'"' Sharter Strip Shingles are color -coordinated starter strips for use with Grand Canyon'' and
<br />6.4.1 Installation of Seal -A -Rid a Rid a Ca Shin les, Seal -A -Kid e IR Im act -Resistant Ride Ca Shin les and Seal-
<br />g p g g p g p g
<br />R❑❑F UNDERLAYMENT APPLICATI❑Ng
<br />Grand Seyuoia'D series asphalt shingles. StarterMat(h'"' arc installed as the second starter for Grand
<br />As required by the Building Official or Authority Ilaving Jurisdiction in order to properly evaluate the installation of
<br />Canyon* and Grand Sequoia" series installations.
<br />A -Rid a ArmorShield Rid e Ca Shin Ies shall coin I with the manufacturer's current ublished instn)ctinns
<br />this product.
<br />TYPICAL rat GIF/LANDMIIRIC srmxues Erc,
<br />Kn
<br />STEEL PLYCLI9.
<br />with ag minimum two (2) nails, minimum 3/8-inch ead diameter, per shingle and nominal 0.25-inch diameter
<br />5. LIMITATIONS:
<br />beads of Henkel "I octite PL S30 Roof & Flashing Sealant"•
<br />MANUFACTURING PLANTS:
<br />1. ROOF COVERINGS SHAH BE APPLIED IN ACCORDANCE WITH
<br />THE APPLICABLE PROVISIONS OF SECTION 1507, FBC, 2010 8d RS NAILI( ll
<br />5.1 This is a building code evaluation. Neither 'I'rinitylERD nor Robert Nieminen, P.E. are, in any way, the.
<br />Designer of Record for any project on which this Evaluation Report, or previous versions thereof, is/was
<br />11.5"
<br />�- Sealant
<br />1^ (292 mini Sollante
<br />(25 mm) (25 mm)
<br />Contact the named CIA entity For information on which
<br />Y plants produce products covered by Florida Rule 61G20-3 CIA
<br />requirements.
<br />2. FOR ROOF SLOPES 2-12 UP TO 4-12 UNDERLAYMENT SHALL BE
<br />A MINIMUM OF 2 LAYERS APPLIED AS FOLLOWS- (SEE ABOVE)
<br />FBC 1507.3.8.1
<br />used for permitting or design guidance unless retained specifically for that purpose.
<br />Enduit cratanch60
<br />---��
<br />10. QUALITY ASSURANCE ENTITY:
<br />3. FOR ROOF SLOPES 4-12 OR GREATER UNDERLAYMENT SHALL BE A
<br />MINIMUM OF ONE LAYER OF UNDERLAYMENT FELT APPLIED AS FOLLOWS- PLYWOOD NAIL PATTERN (ROOF)
<br />5.2 This Evaluation Report is not for use in the HVFIZ•
<br />STARTING AT THE EAVE UNDERLAYMENT SHALL BE APPLIED SHINGLE
<br />UL LLC - Qt1A962.5; (847) 664-3281
<br />FASHION PARALLEL TO THE EAVE, LAPPED 2' AND FASTENED 15/32' CDX SHEATHING SHALL BE NAILED W/ Bd IRS NAILS @ 6' O.C.
<br />5.3 Fire Classification is not part of this Evaluation Report; refer to current Approved Roofing Materials
<br />END OF EVALUATION
<br />SUFFICIENTLY TO STAY IN PLACE UNTIL SHINGLES ARE LAID. @ EDGES AND 8' O.C. MAX, IN THE FIELD. USE 1/2' STEEL PLYCLIPS.
<br />FBC 1507,3.8.2
<br />Directory for fire ratings of this product.
<br />REPORT -
<br />4. DRIP EDGE- DRIP EDGE SHALL BE PROVIDED AT EAVES AND GABLES
<br />S_4 Wind Classification:
<br />D
<br />OF SHINGLE ROOFS AND OVERLAPPED A MINIMUM OF 2 INCHES
<br />72
<br />EAVE DRIP EDGES SHALL EXTEND 1/4' BELOW SHEATHING AND EXTEND
<br />5.4.1 The GAF asphalt shingles noted in Section 4.1 are Classified in accordance with FBC Tables 1507.2.7.1 and
<br />1 pub ntnl)
<br />BACK ON THE ROOF A MINIMUM OF 2 INCHES. DRIP EDGE SHALL BE
<br />R905,2.6.1 to ASTM D3161, Class F and/or ASTM D7158, Class H, indicating the shingles are acceptable for
<br />Wil
<br />Clavo
<br />MECHANICALLY FASTENED A MAXIMUM OF 12' ON CENTER.
<br />FBC 1507.3.8.3
<br />use in all wind zones up to VAu = 150 mph (Vol, _ 194 mph). Refer to Section 6 for installation requirements
<br />6543" •7618' Clouer
<br />to meet this wind rating.
<br />(tfifi - I9iI4 min)
<br />5.4.2 The GAF hip & ridge shingles noted in Section 4.2 are Classified in accordance with FBC Tables 1507.2.7.1
<br />and R9r15.2.6.1 to ASTM D3161, Class r, indicating the shingles are acceptable for use in all wind zones up to
<br />1
<br />va,„ = 150 mph (Vi1c = 194 rnph). Refer to Section b for installation requirements to meet this wind rating.
<br />12' �-
<br />15N ASPHALT F0.T
<br />— INDERLAYMENT
<br />5.4.3 Classification by ASTM D7158 applies only to exposure category B or C, as defined in FBC 1609.4.3, and a
<br />(305 mill)
<br />mean roof height of 60 feet or less. Calculations by a qualified design protessional are required for
<br />6A.2 Installation of Timbertex Premium Ridge Cap Shingles shall Comply with the manufacturer's current
<br />METAL DRIP EDGE
<br />conditions outside these limitations- Contact the shingle manufacturer for data specific to each shingle.
<br />published instructions with a minimum two (2) nails, minimum 3/8-inch head diameter, per shingle and
<br />i AT RAKE APPLIED
<br />OVER
<br />5.5 All products in the roof assembly shall have quality assurance audit in accordance with the Florida Building
<br />beads of Sonneborn NPI Gun Grade Polyurethane Sealant or Henkel PL Roofing and Flashing Sealant.
<br />_ LINDERLAYMENT
<br />Code and F.A.C. Rule 61G20-3.
<br />1' ;p
<br />6. INSTALLATION:
<br />eo
<br />::i r-w:
<br />START THIRD COURSE WITH
<br />FILL STRIP MINUS FIRST
<br />-
<br />6.1 Underlayment
<br />lTAB
<br />6.1.1 Underlayment shall be acceptable to GAF and shall hold current Florida Statewide Product. Approval, or be
<br />START SECOND COURSE
<br />Locally Approved per Rule 61G20-3, per FBC Sections 1507.2.3, 1507.2.4 or R905.2.3.
<br />VITH FILL STRIP MINUS
<br />NI
<br />9' STARTER STRIP OR 1/2 TAB
<br />6.2 Starter Shingles or Starter Strip:
<br />1
<br />COURSE OF INVERTED
<br />6.2.1 Installation of Pro -Start Eave/Rake Starter Strip Shingles, WeatherPremium Eave/Rake Starter Strip
<br />=
<br />I
<br />SHIMMIES START FIRST COURSE WITHBlocker
<br />Shingles and QuickStart Peel & Stick Starter Roll shall comply with the GAF current published instructions.
<br />FILL STRIP
<br />6.3 Asphalt Shingles:
<br />6.3.1 Installation of asphalt shingles shall comply with the manufacturer's current published instructions, using
<br />minimum four (4) nails per shingle in accordance with FBC Sections 1507.2 or R905.2, with the following
<br />exceptions:
<br />R❑❑FING APPLICATI❑N
<br />i Camelot, Camelot 11, Grand Canyon, Grand Sequoia, Grand Sequoia IR, Grand Sequoia ArmorShield, and
<br />Woodland require minimum five (5) nails per shingle.
<br />�r,
<br />L ROOF COVERINGS SHALL BE APPLIED IN ACCORDANCE WITH THE
<br />APPLICABLE PROVISIONS OF SECTION 1507 FBC AND THE
<br />r Sate ine requires minimum six 6 Waifs per shingle.
<br />rt
<br />MANUFACTURERS INSTALLATION INSTRUCTIONS.
<br />6.4.3 Fasteners shall be in accordance with the manufacturer's published requirements, but not less than FBC
<br />2. ASPHALT SHINGLES SHALL BE USED ONLY ON ROOF SLOPES OF
<br />IS07.2.6 or R905.25. Staples are not permitted.
<br />2-12 OR GREATER, FOR ROOF SLOPES FROM 2,12 UP TO 4-12
<br />DOUBLE UNDERLAYMENT APPLICATION IS REQUIRED,
<br />3. UNLESS OTHERWISE NOTED, REQUIRED UNDERLAYMENT SHALL
<br />Exterior Research and Design, LLC. Evaluation Report 01506.01.08-R21
<br />CONFORM WITH ASTM D 226, TYPE 1, OR ASTM 4869, TYPE t
<br />certificate of Authorization #9503 FL10124-R19
<br />Exterior Research and Design, LLC. Evaluation Report 01506.01.08-R21
<br />FBC 1507.3,3
<br />4, SELF ADHERING BITUMEN SHEET SHALL COMPLY WITH ASTM D225
<br />Revlslon21:08/26/2016
<br />CertificnteofAutlrorizotfaa#9503
<br />FL10124-R19
<br />OR ASTM D3462.
<br />Page 4 of 6
<br />FBC 1507.3.4
<br />Revision 21: 08/26/2016
<br />3. ASPHALT SHINGLES SHALL HAVE SELF SEAL STRIPS OR BE INTERLOCKING,
<br />Exterior Research and Design, LLC. Evaluation Report 01506.01.08-R21
<br />Page 6 of 6
<br />AND COMPLY WITH ASTM D225 OR ASTM 113462,
<br />FBC 1507.3.5
<br />Certificate of Authorization #9503 FL1D324-R19
<br />6. FASTENERS FOR ASPHALT SHINGLES SHALL BE GALVANIZED, STAINLESS
<br />STEEL, ALUMINUM, OR COPPER ROOFING NAILS MINIMUM 12 GA (0,105 INCH
<br />Revision 21:08/26/2026
<br />Page 5 of
<br />SHANK WITH A MINIMUM 3/8' DIAMETER HEAD, OF A LENGTH TO PENETRATE
<br />THROUGH THE ROOFING MATERIALS AND A MINIMUM OF 3/4' (1,91,11M) INTO THE
<br />ROOF SHEATHING, WHERE THE ROOF SHEATHING IS LESS THAN 3/4' THICK
<br />THE NAILS SHALL PENETRATE THROUGH THE SHEATHING.
<br />FBC 1507.3.6
<br />7, ASPHALT SHINGLES SHALL BE SECURED TO THE ROOF WITH NOT LESS FOUR
<br />FASTENERS PER STRIP OR TWO FASTENERS PER INDIVIDUAL SHINGLE, UNLESS
<br />OTHERWISE NOTED ATTACHMENT OF ASPHALT SHINGLES SHALL CONFORM WITH
<br />ASTM D3161 (MODIFIED TO 110 MPH) OR M-DC PA 107-95,
<br />FBC 1507.3.7
<br />
|