rNlll�
<br />Exterior Research & Design, L.L.*C. 1_� /
<br />Building Science and EnvWope Consultants ERDV
<br />Cartificate of Authorization "So3
<br />September 20, 2004
<br />RE: Certification of Independence, Florida DCA Rule 9113-72
<br />To Whom It May Concers:
<br />This letter serves to document the following in accordance with Horida DCA Rule
<br />913-72:
<br />I . ERD does not have, nor does it intend to acquire or will it acquire, a financial
<br />interest in any company manufacturing or distributing products it tests or
<br />evaluates.
<br />2- ERD is not owned, operated or controlled by any company manufacturing or
<br />distributing products it tests or evaluates.
<br />3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any
<br />company manuriliacturing or distributing products for which the evaluation reports
<br />are being issued.
<br />4. Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any
<br />other entity involved in the approval process of the product.
<br />Please contact our office with any questions.
<br />Sincerely,
<br />Robert Nienninen, P.E.
<br />Florida Reg. No. 59166
<br />General Manager, ERD East
<br />Cell: (203) 80-5614
<br />Email: robertnQexciesign.corn
<br />Main Offic.:24127" AVOW - Suit. 10 1 - Seattle, WAVA I 19 -V.i..(206) 467-0054 -Fax (206)467-5840
<br />Laboratory: 600 W. Nickerson St - Seattle, WA 901 It - Voice (206) 2919-3620 - Fax (206) 290-3136
<br />ERD East: 2 Mattoon Road * Waterbury, CT 06708 - Voice (203) 596-7814 - Fax (203) S96-7458
<br />Miami -Dade NOA 08-0423.01
<br />MIAM MIAMI-DADE COUNTY, FLORIDA
<br />M METRO-DADE FLAGLER BUILDING
<br />BUILDING CODE COMPLIANCE OVIFICK (BCCO) 140 WEST PIAGLKR STREET, SUITE 1603
<br />PRODUCT CONT'R01, DIVISION WAMI, FLORIDA 33130-1563
<br />(305)375-2901 FAX(305)375-2M
<br />NOTICE OF ACCEPTANCE (NOA)
<br />Southeastern Metal Mgmlifociloriing Company, Inc.
<br />11801 Industry Drive
<br />Jacksonville, FL 32218
<br />SCOPE:
<br />This NOA is being issued under the applicable rules and regulations governing the use ofconstruction materials.
<br />The documentation submitted has been reviewed by Miami -Dade County Product Control Division and accepted
<br />by the Board of Rules and Appeals (BORA) to be used in Miami Dade County and other areas where allowed by
<br />the Authority Having Jurisdiction (AHJ).
<br />Ibis NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control
<br />Division (In Miami Dade County) and/or the AHJ (in awn other than Miami Dade County) reserve the right to
<br />have this product or material tested for quality assurance purposes. If this product or material fili Is to perform in
<br />the accepted manner, the manufacturer will incur the expense of such testing and the AIU may immediately
<br />revoke, mcxlif�G or suspend the use of such product or material within their jurisdiction. BORA reserves the right
<br />to revoke this acceptance, if it is determined by Miami-Dadc County Product Control Division that this product or
<br />material fails to meet the requirements of the applicable building code.
<br />This product is approved as described herein, End has been designed to comply with the Florida Building Code,
<br />including Me High Velocity Hurricane Zone of the Florida Building Code.
<br />DESCRIPTION: Weather Vent
<br />LABELING: Each unit shall beer a permanent label with the manufacturees name or logo, city, state and
<br />following statement: 'Mianli-Dade County Product Control Appruved", unless otherwise noted herein.
<br />RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no
<br />change in the applicable building code negatively affecting the performance ofthis product.
<br />TERMINATION of this NCIA will occur after the expiration date or ifthere has been a revision or change in the
<br />materials, use, andtor manufacture ofthe product or process. Misuse ofthis NOA as an endorsement ofany
<br />product, for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply
<br />with any section ofthis NOA shall be cause for termination and removal ofNOA.
<br />ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by
<br />the expiration date maybe displayed in advertising literature. Ifany portion of the NOA is displayed, then it shall
<br />be done in its entirety.
<br />INSPECTION. A copy ofthis entire NOA shall be provided to the user by the manufacturer or its distributors
<br />and shall be available for inspection atthejob, site at the request ofthe Building Official.
<br />This renews NOA 03-1008.02 and consists ofpages I through 3.
<br />The submitted documentation was reviewed by Alex Tigera.
<br />10�
<br />NOA No 0"423.01
<br />Expiration Date: 04/15/14
<br />Approval Date: 06/85M
<br />Page I of 3
<br />017TERIOR RESEARCH St DESIGN, LLC.
<br />2 MATTOON ROAD
<br />,hurtion *9503 WATERBURY, CT 06488
<br />PHONE; (203) 596-7884
<br />FAX: (203) 596-7058
<br />EVALUATION REPORT
<br />CortaInTead Corporation ERD Evaluation Report 353Z.09.05
<br />1400 Union Meeting Road FL5444
<br />Blue Sell, PA 19422 Date of Issuance: 09/22/2005
<br />SCOPE:
<br />This Evaluation Report is issued under Rule 9B-72 and the applicable rules and regulations
<br />governing the use of construction materials in the State of Florida. The documentation submitted
<br />has been reviewed by Robert Nieminen, P.E. for use of the product under the Florida Building Code.
<br />The product described herein has been designed to comply with the Florida Building Code.
<br />DIESCRIPTION: Carriage House Shongle, Centennial Slots, Classic Horizon Shangle, CT20, CT20AR,
<br />Grand Honor Shangle, Hatteras, Landmark 30, Landmark 30 AR, Landmark 40, Landmark 40 AR,
<br />Landmark TL, Paltriat AR, Presidential Shake, Presidential Shake AR, Presidentiall Shake TLV
<br />Preoldential Shake TL AR, XT25, XT25 AR, XT30 and XT30 AR asphalt roof shingles.
<br />LAsELING: Each unit shall bear a permanent label with the manufacturer's name, logo, city, state
<br />and logo of the Accredited Quality Assurance Agency noted herein.
<br />CONTINUED COMPLIANCE: This Evaluation Report Is valid until such time as the named product(s)
<br />changes, the referenced Quality Assurance documentation changes, or provisions of the Code that
<br />relate to the product change. Acceptance of this Evaluation Report by the named client constitutes
<br />agreement to notify ERD or Robert Nleminen, P.E. If the product changes or the referenced Quality
<br />Assurance documentation changes.
<br />ADVERTISEMENT: The Evaluation Report number preceded by the words 'ERD Evaluated' may be
<br />displayed In advertising literature. If any portion of the Evaluation Report Is displayed, then It shall
<br />be do ie In Its entirety.
<br />INSPECTION: A copy of this entire Evaluation Report shall be provided to the user by the
<br />manufacturer or Its distributors and shall be available for Inspection at the job site at the request of
<br />the Building Official.
<br />This Evaluation Report consists of pages 1 through 3.
<br />Prepared b
<br />Robert I.M. Nienninen, P.E.
<br />Florida Registration No. 59166, Florida DCA ANE1983
<br />CERTIFICATION OF INDEPENDENCE:
<br />1. ER D East does not have, nor does it intend to acquire or will it acquire, a financial Interest in any company
<br />manufacturing or distributing products it evaluates.
<br />2. ERD East Is not owned, operated or controlled try any company manufacturing or distributing products It
<br />evaluates.
<br />3. Rcbert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing or
<br />distributing products for which the evaluation reports are being issued.
<br />4. Robert Nleminen, P.E. does not have, nor will acquire, a financial interest In any other entity Involved In
<br />the approval process of the product.
<br />Miami -Dade NOA 08-0423.01
<br />ROOFING AssEhmLy APPRovAL
<br />Catestsion:
<br />Roofing
<br />5-uhs.111111219M.
<br />07720 Static Roof Vent
<br />materials:
<br />Steel
<br />TRADE NAhM OF PRODUCTS MANUFACTURED OR LABELED BYAPPucANT:
<br />Test Product
<br />Prw
<br />Dimension SpeclOcaltim Descriatki
<br />Weather Vent
<br />Vent: 4- 1/." x 19'x 46" TAS 100 Galvanized metal roofvent
<br />Deck Flange; 24" x 52"
<br />Thickness: 0.0217 inch.
<br />EyrDENcE SuBmriTED:
<br />Tat Aztecy/lden
<br />No- ft2irt DRIC
<br />PR I Asphalt Technologim Inc.. TAS 100 SEM-002-02-01 09114103
<br />APPROVED APPLICATIONS:
<br />Dock Type:
<br />Wood
<br />Dmk Description;
<br />"Im" or greater plywood or wood plank
<br />9) stein Type A:
<br />Mechanical attachiriont, of vent for shingle roofs
<br />Cutout:
<br />Mark a 3 �V x 46" opening centered between layout lines and align ed minimum 6
<br />inches from the ridge. Set blade to thickness of sheathing and out opening. Brush
<br />away sawdust and debris.
<br />InswIntion:
<br />Vents Should be evenly spaced on the raw slope of the roof.
<br />Center vent in opening and ad it in a 1/8" thick of asphalt roofing cement. Secure
<br />vent to the roof deck with 1-114" galvanized ring dank roofing nails spaced approx.
<br />8" o.c. and I" from the outaide c* of the flange. Use a minimurn of 18 nails per
<br />vent Sea] all nails and vent flange with an approved ASTM D 4586 roofing
<br />cement. (See drawings herein).
<br />Not Free Area:
<br />Refer to manufacturers published literature
<br />Seranco Off Ridge Vent Installation Detail
<br />Center vent in opening and set it in a 1/8" thick of asphalt
<br />roofing cement. Secure vent to roof deck with 1-1/4"
<br />galvanized ring shank roofing nails spacing approx. 8w o.c.
<br />and I" from the outside edge of the fiange. Use a
<br />minimi im nf 1 A naila or wilint qcbnl nil nnilc and vent
<br />3n approved ASTM D 4586 roofing cement.
<br />)ut size 3 1/2" x 46" _NNNN
<br />t Base size 24" x 52-
<br />- \e
<br />0 N
<br />"N
<br />NN
<br />"IN
<br />N,
<br />I r "N'
<br />N.
<br />M in. 12" own from ridge line to top of vent base
<br />I IN
<br />N, "I
<br />IN'
<br />1"-10" to top of cut out from ridge
<br />N` N�
<br />`N
<br />Add 2x4 blocking
<br />on the flat under
<br />vent base
<br />NOA No 05-0423.01
<br />ExpirstionDatil: MSn4
<br />Approval Date: 06/11111M
<br />Page 2 of 3
<br />:EXDL/
<br />iselors *95403
<br />Rooisimc. AssiansLy EVALUATION:
<br />1. SCOPE:
<br />Product Category: Roofing
<br />Sub-CategorV: Asphalt Shingles
<br />Compliance Statement: Carriage House Shangle, Centennial Slate, Classic Horizon Shangle, CT 20,
<br />CT20AR, Grand Manor Shangle, Hatteras, Landmark 30, Landmark 30 AR, Landmark 40, Landmark 40
<br />AR, Landmark Tt, Landmark TL AR, Patriot AR, Presidential Shake, Presidential Shake AR, Presidential
<br />Shake TL, Presidential Shake TL AR, Xr 25, XT 25 AR, XT 30 and XT 30 AR asphalt roof shingles, as
<br />produced by CertainTeed Corporation, have demonstrated compliance with the Florida Building Code
<br />through testing in accordance with the Standards set forth herein. Compliance is subject to the
<br />Installation Requirements and Limitations / Conditions of Use set forth herein.
<br />2. STANDARDS:
<br />Section Property Standard YM
<br />1507.2.5 Physical Properties ASTM D3462 2001
<br />1507.2.7 Wind Resistance ASTM D3161 (110 mph) 1999
<br />1505.1 Fire Classification UL 790 1997
<br />3. REFERENces:
<br />Raft zxaminothm ROfffl3kMM
<br />Underwriters Labs. ASTIM D3462 R684 09/21/2005
<br />Underwriters Labs. UL 790 R684 09/21/2005
<br />Underwriters Labs. ASTM D3161 (to 110) 05CA16778 05/12/2005
<br />Underwriters Labs. ASTIM D3161 (to 110) 03CA12702 06/1612003
<br />Underwriters Labs. ASTM D3161 (to 110) 99NK26506 11/23/1999
<br />Underwriters Labs. ASTM D3161 (to 110) 03CA12702 05/27/2003
<br />Underwriters Labs. ASTIM D3161 (to 110) 05NK22800 06/22/2005
<br />Underwriters Labs. ASTM D3161 (to 110) 04CA32986 12,(03/2004
<br />Underwriters Labs. ASTIM D3161 (to 110) 04CA11329 05/24/2004
<br />Underwriters Labs. ASTM D3161 (to 110) OSNK14836 05/22/2005
<br />Underwriters Labs. ASTIM D3161 (to 110) 05NK07049 04/15/2005
<br />Underwriters Labs. ASTM D3161 (to 110) 99NK29506 11/23/1999
<br />Underwriters Labs. ASTIM D3161 (to 110) OSNK16778 05/12/2005
<br />Underwriters Labs. ASTM D3161 (to 110) 94NK9632 05/is/1998
<br />Underwriters Labs. ASTM D3161 (to 110) 03NK29847 10/03/2003
<br />Underwriters Labs. Quality Control R684 Current
<br />4. PnoDucr DescitipritoN,
<br />4.1 Classic Horizon Shangle, CT 20, CT20AR, Patriot AR, XT 25, XT 25 AR, )(T 30 and XT 30 AR are
<br />fiberglass reinforced, 3-tab asphalt roof shingles.
<br />4.2 Carriage House Shangle, Centennial Slate, Grand Manor Shangle, Landmark 30, Landmark 30
<br />AR, Landmark 40, Landmark 40 AR, Landmark TL and Landmark TL AIR are fiberglass reinforced,
<br />laminated asphalt roof shingles.
<br />4.3 Presidential Shake, Presidential Shake AR, Presidential Shake TL and Presidential Shake TL AR
<br />are fiberglass reinforced, architectural asphalt roof shingles.
<br />4.4 Hatteras is a fiberglass reinforced, 4-tab asphalt roof shingle.
<br />END Evaluation Report 3532.09.05
<br />FL5444
<br />Data af Ziesuence: 09/22/2005
<br />Page 2 of 3
<br />Miami -Dade NOA 08-0423.01
<br />LIMITATIONS:
<br />1. Refer to applicable building code for required ventilation.
<br />2. 'Me instaillation. shall be applied in compliance with the manufammes curresit published
<br />application instruction and the mquirments set forth in applicable building code.
<br />3. Tbis acceptance is for installations over asphaltic shin& roofs only.
<br />4. Weather Vents shall not be installed on roof mean heights greater than 33 feet.
<br />5. All products listed herein shall have a quality assurance audit in accordance with the Florida
<br />Building Code slid Rule 9B-72 ofthe Florida Administrative Code.
<br />DRAWINGS
<br />ROOF FLANGE NAIL PLACEMENT
<br />END OF IMS ACCEPTANCE
<br />FIGURE h. FLA64+06 IWALLATM
<br />NOA No 08-0423.01
<br />Expiration Dato WN14
<br />Approval D&W WNW
<br />Pap3of3
<br />alearlisedon 4105*3
<br />S. LiourTATions:
<br />5.1 This Evaluation Report is not for use in the HVHZ.
<br />5.2 Fire classification Is not part of this evaluation; refer to current Approved Roofing Materials
<br />Directory for fire rating of this product.
<br />5.3 Installation shall comply with manufacturer's current published Instructions, but not less than the
<br />requirements of FBC Section 1507.2.
<br />5.4 All products In the roof assembly shall have quality assurance audit In accordance with the
<br />Florida Building Code and F.A.C. Rule 98-72.
<br />6. IPISTALLATIOPI:
<br />6.1 Installation shall comply with manufacturer's current published instructions, but not less than the
<br />requirements of FEIC Section 1507.2.
<br />6.2 Where the roof slope exceeds 20 units vertical in 12 units horizontal (166-percent slope), special
<br />methods of fastening are required.
<br />7. I.Aaeume:
<br />Each unit shall bear a permanent label with the manufacturer's name, logo, city, state and logo of the
<br />Accredited Quality Assurance Agency noted herein.
<br />S. BUILDING PERMIT RiiQUIREMENTS:
<br />As required by the Building Official or Authority Having lurisdiction In order to properly evaluate the
<br />installation of this product.
<br />9. MANUFACTtRUM PLANTS'.
<br />Contact manufacturer or Quality Assurance Entity for specific information on which plant produces
<br />which products: Avery -OH, Birmingham -AL, Ennis -TX, Freemont-CA, Norwood -MA, Oxfbrd-NC,
<br />Peachtree City -GA, Portland -OR, Shakopee -MN, Shreveport -LA, Wilminton-CA.
<br />10. QUALITY ASSURANCE ENTITY:
<br />Underwriters Laboratories - QUA1743
<br />- END OF EVALUATION REPOWr -
<br />END EVNIssation Report 3532.09.05
<br />FL5444
<br />Date of Issuance: 09/22/2005
<br />Page 3 of 3
<br />MIAMM MIAMI-DADE COLWN, FIA)RIDA
<br />MEMO-DADE FLAGLER BUILDING
<br />BUILDING CODE COMPLIANCE 0111TICE MCCO) 140 WEST FLAGLER STREET, SUITE 160
<br />PRODUCT CONTROL DIVISION M". FLORIDA 33130-1563
<br />(305)375-2901 FAX(305)375-2909
<br />NOTICE OF ACCEPTANCE (NOA)
<br />Florida Metal Products I=.
<br />P.O. Bar 6310
<br />Jacksonville, FL 32236-010
<br />SCOPE:
<br />This NOA is being issued under the applicable rules and regulations governing the use of construction
<br />materials. The documentation submitted has been reviewed by Miami -Dade County Product Control
<br />Division and accepted by the Board of Rules and Appeals (BORA) to be used in Miami Dade County
<br />and other areas where allowed by the Authority Having Jurisdiction (AEU).
<br />This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product
<br />Control Division (In Miami Dade County) and/or the AM (in area other than Mianii Dade County)
<br />reserve the right to have this product or material tested for quality assurance purposes. If this product or
<br />material fails to perform in the accepted manner, the manuillacturer will incur the expense of such testing
<br />and the AHJ may immediately revoke, nxxlif�, or suspend the use of such product or material within
<br />their jurisdiction. BORA reserves the right to revoke this acceptance, if it is determined by Miami -Dade
<br />County Product Control Division that this product or material fails to meet the requirements of the
<br />applicable building code.
<br />This product is approved as described herein, and has been designed to comply with die Florida Building
<br />Code and the High Velocity Hurricane Zone of the Florida Building Code.
<br />DESCREMON: RVIO Aluminum Ridge Vent
<br />LABELING: Each unit shall bear a permanent label with the manufacturees name or logo, city, state
<br />and following statement: "Miami -Dade County Product Control Approved", unless otherwise noted
<br />herein.
<br />RENEWAL of this NOA shall be considered after a renewal application has bow filed and there has
<br />been no change in the applicable building code negatively affecting the performance of this product.
<br />TERMINATION of this NOA will cc= after the expiration date or if there has been a revision or
<br />change in the materials, use, and/or manufacture of the product or process. Misuse of this NOA as an
<br />endorsement of any product, for sales, advertising or any other purposes shall automatically tenninate
<br />this NOA. Failure to comply with any section of this NOA WWI be cam for termination and removal of
<br />NOA.
<br />ADVERTISEMENT. The NOA number preceded by the words Miami -Dade Coturty, Florida, will
<br />followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is
<br />displayed, then it shall be done in its entirety.
<br />INISPLCMON: A copy of this entire NOA Shall be provided to the user by the manufacturer or its
<br />distributors and shall be available for inspection at the job site at the request of the Building Official.
<br />This NOA renews NOA No. 02-0913.01 and consists of pages I throligh 3.
<br />The submitted documentation was reviewed by Jorge L. Acebo.
<br />NOA No.: 07-118106
<br />Expiration Date: Olf3lffl9
<br />Approval Date: NA4108
<br />Pap I of 3
<br />FWRE 2t. U44LL FNMW
<br />0
<br />q.
<br />V
<br />t:
<br />L
<br />\\J TR NTY Em
<br />15T�KISIAACW & DUIGK LLC.
<br />FL CERTFICATE OF AUTWOR17ATION #9503
<br />April 25, 2D08
<br />Jim Brandt
<br />CertainTeed Corporation
<br />Blue Bell. PA
<br />RE: CertainTeed Asphalt Shingles
<br />FSC Approval under 2004 FBC with 2006 Supplements and 2007 FBC
<br />Dearjim
<br />Reference is made to our Evaluation Report 3S32-09.05 dated 09/22/2005, which forms the basis for Florida Statewide
<br />Product Approval FL5444.
<br />This letter serves to confirm that the following CertainTeed asphalt-shinees, as referenced in said Evaluation Report,
<br />Classilied for wind resistance as ASTM D316 1. Class F and ASTM D71 S8, Class H.
<br />Carriage House, Centennial Slate, Classic Horizon, CT-20, Grand Manor, Flatter -as. Landmark
<br />Landmark TL Ultimate, Patriot, Presidential, Presidential TL Ultimate and XT-251SK-25
<br />Reference is made to FBC Table 1507.110 in the deterrnin2tion of the wind speed jurisdictions associated with these
<br />Classifications.
<br />Please contact our Connecticut office with any questions.
<br />Sincerely,
<br />Robert Meminen. RE
<br />Vice Preadert
<br />Florida Raq� No. S9166
<br />Cell: (203) 11109-S614
<br />Emil: robertnIenvnen@v*wtywd,=n
<br />osslGN I --aftULTATION
<br />MAIN OFFICE: 80 YESLER WAY. SUITE 200 1 SEATTLE, WA 98104 1 TEL: 206 467 0054 1 FAX:206 467 5940
<br />CONNECTICUT: 353 CHRISTIAN STREET. UNIT 13 1 OxFoRo. CT 06478 1 TEL 203 26Z 9645 1 FAX: 203 262 9243
<br />LABORATORY: 10 MAUNEY COURT I COLUMBIA, SC 29201 1 TEL 1103 990 913) 1 FAX; 203 909 9111
<br />ROOFING SYSTEM APPROVAL
<br />C-atialory-,
<br />Roofing
<br />Sub-Critaialry:
<br />Ventilation
<br />bloterial:
<br />Aluminum
<br />TRADE NAMES OF
<br />PRODUCTS MANUFACTURED OR LABELED BYAPPuCANT:
<br />Test Product
<br />Prodact
<br />Dimensions Specification Description
<br />RVIO Aluminum
<br />7-s/." x 10'-0" TAS 100(A) Ridge ventilation system
<br />Ridge Vent
<br />EVIDENCE SUBMITTED:
<br />Test Aneacy
<br />Test Identifier Description Date
<br />Center for Applied
<br />MTS 257414a TAS 100(A) September, 1995
<br />Engineering, Inc.
<br />GENERAL LIMITATIONS:
<br />1. Refer to applicable Building Code for required ventilation.
<br />2. RV 10 Aluminum Ridge Vent shall not be installed in conjunction with Gable vents.
<br />3. RV 10 Aluminum Ridge Vent. Shall comply with applicable building code.
<br />4. RV 10 Aluminum Ridge Vent shall not be installed on roof mean heights greater than 33 feet.
<br />5. RV 10 Aluminum Ridge Vent WWI comply with 1517.6 of the Florida Building Code (FBC)
<br />NOA No.: 07-iiog-96
<br />Expiration Date: OU31/09
<br />Approval Date: 02n4/08
<br />Page 2 of 3
<br />FIGME 33: COMM MAIL
<br />APPROVED APPLICATIONS:
<br />Trade same: RV 10 Aluminum Ridge Vent
<br />System Type A: Mechanical attachment of ridge vent system over asphalt composition shingles.
<br />cutout: Truss Construction: Cut shall be 2" wide, and length shall be 12" (plus overhang
<br />length) shorter on both sides of gable end or hips.
<br />Ridge Pole Construction: Cut shall be 3-'A" wide, and length shall be 12" (plus
<br />overhang length) shorter on both sides of gable end or hips.
<br />Installation: Install end plug on the end of the vent scaled with 100% silicone sealant. RVIO
<br />Aluminum Ridge Vent shall be 4- longer than ventilation slot as to provide, a base for
<br />the and plug.
<br />Apply IK" wide bead of 100% silicone sealant caulk to the bottom flange of the RV 10
<br />Aluminum Ridge Vent sections close to where roof hole will be after vent is installed.
<br />Align end of first section on the end marks and the bottom of the nailing flange on the
<br />chalk line (4" down on both side of the ridge peak.) Nail the RV 10 Aluminum Ridge
<br />Vent in place using V/2" aluminum ring shank roofing nails 6" o.c., with the first nail
<br />I%" to 2" form the vent end. All nail heads and vent section joints shall be sealed
<br />with 100% silicone sealant.
<br />Install Florida Metal Products, Inc. High Wind Straps over each end offidge vent, all
<br />connections between sections, and at a maximum of 3 fL intervals over the remainder
<br />ofthe vent using four 1-11/2 " aluminum ring shank roofing nails per strap.
<br />Ridge Shiagle: None
<br />Ventilation
<br />Calculations: Refer to manufacturer's published literature
<br />Mialmant Slope: 2:12
<br />DETAIL
<br />5-3/41'
<br />V2�'
<br />RVIO Aluminum Ridge Vent
<br />END OF THIS ACCEPTANCE
<br />NOA No.: 07-1105.06
<br />Expiration Date: 01 /31/09
<br />Approval Date: 02114108
<br />Page 3 of 3
<br />A4J_11NCX INSTALLATI-lablN
<br />. . . . . . . . . . . . .
<br />. . . . . . . . . . . . ....... . . . .
<br />.
<br />&
<br />A_'
<br />2
<br />. . ........ . .
<br />..........
<br />...........
<br />FLASPONG MAILS
<br />N V 1, R,, ........
<br />. P i�� 5 N Al.<&-
<br />KIA&L Wli
<br />A Ilk
<br />A � Al
<br />Wrfi,
<br />FLASHING DETAIL. AT CRICKETKNEEWALL MTERSECTION
<br />-6--o
<br />CD
<br />CD
<br />C_
<br />Cn
<br />-00
<br />>
<br />C)
<br />c-
<br />16._
<br />CL
<br />2
<br />c:)_
<br />o
<br />CU
<br />CU
<br />-cu
<br />Cn
<br />Q
<br />0
<br />0
<br />2
<br />=
<br />0
<br />=
<br />0
<br />U_
<br />CU
<br />%+-
<br />0
<br />cu
<br />>
<br />Cn
<br />-0
<br />E
<br />02
<br />0
<br />CL
<br />CG
<br />CU
<br />402
<br />-0
<br />C
<br />C/)
<br /><
<br />0!
<br />14
<br />Z
<br />Z
<br />W
<br />=I
<br />C:=
<br />(D
<br />co
<br />0
<br />an In
<br />C)
<br />Cn
<br />CU
<br />Fee-
<br />00
<br />Co
<br /><
<br />Z_r
<br /><
<br />SHEET NO.
<br />RD 1,0
<br />00
<br />Z
<br />0
<br />_J
<br />00
<br />IT-,
<br />C:)
<br />N
<br />C�
<br />C:)
<br />
|