|
Exterior Research & Design, L.L.-C.
<br />Building Science and Envelope Consultants ERp
<br />certificate of Authoritarian #9503
<br />September 20, 2004
<br />RE: Certification of Independence, Florida DCA Rule 98-72
<br />To Whom It May Concern:
<br />This letter serves to document the following in accordance mth Florida DCA Rule
<br />9B-72:
<br />I. ERD does not have, nor does it intend to acquire or will it acquire, a financial
<br />interest in any company manufacturing or distributing products it tests or
<br />evaluates.
<br />2. ERD is not owned, operated or controlled by any company manufacturing or
<br />distributing products it tests or evaluates. .
<br />3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any
<br />company manufacturing or distributing products for which the evaluation reports
<br />are being issued.
<br />4. Robert Nieminen, R.E. does not have, nor will acquire, a financial interest in any
<br />other entity involved in the approval process of the product.
<br />Please contact our office with any questions.
<br />Sincerely,
<br />Robert Nieminen, P.E.
<br />Forida Reg. No. 59166
<br />General Manager, ERD East
<br />Cell: (203) 809-5614
<br />Email: robertnC xdesign.com
<br />Mal. dike. 2411 7"• Ave W . Suitt 101 . Scottie, WA 981 t9 . Voice (206) 467-00S4 . Fax (706) 467-SS40
<br />Laboratory: 600 W. Nmkersotr St . Seattle, WA 98119 • V.iee (206) 298-3620 • Fax (206) 298.3130
<br />ERD East: 1 Mattoon Road • Waterbury, CT 06708. Voico (203) 596-7864 • F.. (203) 596.7058
<br />8MAA1l-DkDFu CPLTNTY, FLORIDA
<br />M
<br />ME•rRO-DARE FLAGi ER nUILDEIG
<br />BUIli CODE COMP' LVICE OITICE (BCCO) 140 ih'ES'I rl yr J.&R 61"RF>;•T SU17T 1603
<br />PRODUCTCONTROL DIVISION WAMI, FLORIDA 33t 0..563
<br />;iD) 3 s 7nm r1x ('+0� 3 �2908
<br />NO'i CE OF ACCF.PTA_N_CF (NOA)
<br />Southeastern Metal Manufacturing Company, Inc.
<br />11801 Industry Drive
<br />Jacitsouvine. FL 32218
<br />SCOPE;
<br />This NOA is being issucd under the applicahle rules and regulations governing the use of contraction materials.
<br />I. Division d accepted
<br />Ti1a documentation mlt+mitted has l�;n reviewed by Miatni-Dade County Product Control Dt s i t an
<br />by the Board of Rules and Appeals (BORA) to be used in Miarrli Dade County and other areas where allowed by
<br />the Authority Hisvin, Jurisdiction (AM),
<br />This NOA shall not be valid after rlr expiration date stated below. The Mi:mv Dade County Product Control
<br />Di iaion (In Nfimxv Dade Count)) and/or the AHJ (in areas other than Miami Dade County) reserve the tight to
<br />have this product or material tested for quality assurance purposes. If this product or material 'fails to perform in
<br />the accepted ,manner, the nwnufa uirur wilt incur the expense of such testing and The AHJ may hoinediarely
<br />revoke, modify, or suspend the use of such product or trateriai within l3tert jurisdiction. BORA mservec the right
<br />to invoke this acceptance, if it is determined. by Miami -Dade County Product Control Division that this product or
<br />imperial falls to meel the rNuirerrients of the applicable building code.
<br />This product is approved as described herehr, and has been designed to comply with the Florida Building Code,
<br />including the High Velocity Hurricane 7 me.
<br />DESCRIPTION: Weafl7er Vent
<br />LABFLINC Each trait shall hear a perrnaneatt label with the. manufacturer's name or Toga, city, state mill
<br />following statement: ",Munni•Dade County Product Control Approved" Euless othenv r.e noted herein.
<br />has heen no
<br />V d re
<br />RENEWAL of this . 0.'+ shall he considered after a renew al application has [Teen filed anhe i .
<br />change in the applicable building code negraivoy affecting the performance of this product
<br />TERLIINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
<br />materials, use, and/or manufacture of the product or process. Misuse of this NOA as an ondorsemem of any
<br />nrodu n, for _al qs advertising or any other purposes shall aubamaticall} terrninate this NOA. Failure to comply
<br />a rem 'a of NOA w uh env° see ton ofthis NOA shall be cause for loriTrinauon rid ov 1 - - _,
<br />Ail K7 LSEMh:NT; I he NOA numher preceded by the words Miami -Dade County. Florida, and followed by
<br />the expiration date Tray he displayed in advortising literature. Tf any portion of die NOA is displayed, then it shall
<br />be done I it its cntirett.
<br />iNSPEC.TION' A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors
<br />and shall he available for inspection at the jots site at the request of the ,Building Official.
<br />This NOA consi is of pages 1 through 3.
<br />The submitted documentation was reviewed by Prank Zuloaga, RRC.
<br />NOA Psio 034008.02
<br />Expiration Date: 04/15/09
<br />0 Approval Date: 04/15/04
<br />Page 1 of 3
<br />FL k
<br />FL5027
<br />Application Type
<br />New
<br />Code Version
<br />2004
<br />Application Status
<br />Approved
<br />Comments
<br />Archived
<br />■
<br />Product Manufacturer
<br />LL Building Products, Inc sub of GAFMC
<br />Address/Phone/Email
<br />295 McKay Road
<br />Burgaw, NC 28403
<br />(910) 259.6374 ext 244
<br />sboehling@gaf.com
<br />Authorized Signature
<br />Steve Boehling
<br />sboehling@gaf,com
<br />Technical Representative
<br />Steve Boehling
<br />Address/Phone/Email
<br />295 McKoy Road
<br />Burgaw, NC 2842S
<br />sboehling@gaf,com
<br />Quality Assurance Representative
<br />Enrique Morales
<br />Address/Phone/Email
<br />295 McKoy Road
<br />Burgaw, NC 2842S
<br />emorales@gaf.com
<br />Category
<br />Roofing
<br />Subcategory
<br />Other
<br />Other Subcategory
<br />Ventilation
<br />Compliance Method
<br />Certification Mark or Listing
<br />Certification Agency
<br />Miami -Dade BCCO - CER
<br />Referenced Standard and Year (of Standard Year
<br />Standard) Florida Building Code 2004
<br />Equivalence of Product Standards
<br />Certified By
<br />Sections from the Code 1517.E
<br />Product Approval Method Method I Option A
<br />Date Submitted 09/06/2005
<br />Date Validated 09/23/2005
<br />Date Pending FBC Approval 09/30/2005
<br />Date Approved 10/11/2005
<br />EXTERIOR RESEARCH & DESIGN, LLC.
<br />Edict 2 MAT'TOON ROAD
<br />Certficate of Authorization Ai WATERBURY, CT 06488
<br />PHONE: (203) 596-7884
<br />FAX; (203) 596-7058
<br />_EVALUATION REPORT ___-___
<br />CertainTeed Corporation ERD Evaluation Report 3532.09.05
<br />1400 Union Meeting Road FL5444
<br />Blue Bell, PA 19422 Date of Issuance: 09/22/200S
<br />SCOPE:
<br />This Evaluation Report is issued under Rule 913-72 and the applicable rules and regulations
<br />governing the use of construction materials in the State of Florida. The documentation submitted
<br />has been reviewed by Robert Nieminen, P.E. for use of the product under the Florida Building Code.
<br />The product described herein has been designed to comply with the Florida Building Code.
<br />DESCRIPTION! Carriage
<br />e House Shangle, Centennial Slate, Classic Horizon Shangle, CT20 CT 20AR
<br />Grand Manor Shangle, Hatteras Landmark 30 Landmark 30 A Landmark 40 Landmark 40 AR
<br />9 er Rr
<br />Landmark TL, Patriot AR, Presidential Shake, Presidential Shake AR, Presidential Shake TL,
<br />Presidential Shake TL AR, XT25, XT2S AR, XT30 and XT'30 AR asphalt roof shingles.
<br />LABELING: Each unit shall bear a permanent label with the manufacturer's name, logo, city, state
<br />and logo of the Accredited Quality Assurance Agency noted herein -
<br />CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named products)
<br />changes, the referenced Quality Assurance documentation changes, or provisions of the Code that
<br />relate to the product change. Acceptance of this Evaluation Report b the named client constitutes
<br />9Po V
<br />agreement to notify "ERD or, Robert Nieminen, P.E. if the product changes or the referenced Quality
<br />Assurance documentation changes.
<br />ADVERTISEMENT: The, Evaluation Report number preceded by the words "ERD Evaluated" may be
<br />displayed in advertising literature. If any portion of the Evaluation Report is displayed, then it shall
<br />be done in entirety.
<br />its enti t .
<br />INSPECTION: A copy of this entire Evaluation Report shall be provided to the user by the
<br />manufacturer or its distributors and shall be available for inspection at the job site at the request of
<br />the Building Official.
<br />This Evaluation Report consists of pages I through 3.
<br />Prepared b
<br />Robert 3.M. Nieminen, P.E.
<br />Florida Registration No, 59165, Florida DCA AIV 1963
<br />CERTIFICATION OF INDEPENDENCE:
<br />.. ERD East does not have, nor does it intend to acquire or will it acquire, a financial Interest in any company
<br />manufacturing or distributing products it evaluates.
<br />2. ERD East Is not owned, operated or controlled by any company manufacturing or distributing products It
<br />evaluates.
<br />3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest In any company manufacturing or
<br />distributing products for witch theevaluation reports are being issued.
<br />4. Robert Nieminen, P.E. does not have, nor will acquire, a financial Interest in any other entity involved in
<br />the approval process of the product.
<br />ROOFING ASsrutuit.if APP1tovAL
<br />.ate orv: Roofing
<br />Sub-CatOEory: 07720 Static Roof Vent
<br />:•later: s: Steel
<br />TRADENAMFS OF PRODUCTS l4MANTUFACTURED OR LABELED BY APPI IC ANT':
<br />rest Product
<br />Product Dimensions smirication Description
<br />wearier Vcnt Vent: 4- yr x 19" x 46" TAS 100 Galvanized metal roof vent
<br />Deck Flange: 24" x 52"
<br />Thickness: 0.0217 inch.
<br />EVIDFNC,SUBMITTED!
<br />Test leencvlidentillier Name Repor Rate
<br />PRI'AsphaltTechnologies,Inc- TASINI 5BM-002.02-Ct1 0&14103,
<br />APPROVFD APPLICATIONS:
<br />Deck Type: Wood
<br />Deck Description; '%a ' m greater plywood or wood plank
<br />System Type A Mechanical. attachrnent of vent for shingle roofs
<br />Cutout_ Mark a 3Ni' x 46" opening ccatcred between layout lines and aligned naaial'un 6
<br />inches from the ridge. Set blade to thickness of sheathing and cut opening. Brush
<br />away sawdust and debris.
<br />Installation: Vents should Ix cNerdy spaced on the rear slope ol'the T00f.
<br />Cenrer vent in opening and set it in a I/8" thick of asphalt rooting cement. Secure
<br />vent to the roof deck with 1 114 galvalltred ring shank rooFattg nails spaced approx.
<br />8" eta arid 'I" from the outside edge of the flanec Use a minimum of k 8 nails per
<br />writ Seal. a.li nails and vent flange with an approved A.STR4 D 4586 roofing
<br />cerwirt- (See drawings herein).
<br />Net Free Area: Refer to manufacturers published literature
<br />NOA Nn 03-1008,02
<br />Expiration Date: 04/15/09
<br />0 Approval Date: 04/15/04
<br />Page 2 of 3
<br />5027.1 R10 Ridge Vent
<br />10' long aluminum ridge vent - in embossed
<br />mill finish and colors !
<br />Limits of Use (See Other)
<br />Certification Agency Certificate
<br />Approved for use in HVHZ:
<br />Installation Instructions
<br />Approved for use outside HVHZ;
<br />Verified By:
<br />Impact Resistant:
<br />Design Pressure: +/-
<br />Other: AR10 Ridge Vents shall not be
<br />installed on roof mean heights greater than
<br />33 feet per Miami -Dade NOA 02-0524.01. Theil
<br />AR10 Ridge Vent complies with the HVHZ of
<br />the Florida Building Code
<br />i
<br />Certirrcate of Authorization 09503
<br />ROOFING ASSEMBLY EVALUATION:
<br />1, SCOPE:
<br />Product Category: Roofing
<br />Sub -Category., Asphalt Shingles
<br />Compliance Statement: Carriage House Shangle, Centennial Slate, Classic Horizon Shangle, CT 20,
<br />CT20AR, Grand Manor Shangle, Hatteras, Landmark 30, Landmark 30 AR, Landmark 40, Landmark 40
<br />AR, Landmark TL, Landmark TL AR, Patriot AR, Presidential Shake, Presidential Shake AR, Presidential
<br />Shake TL, Presidential Shake TL AR, XT 25, XT 25 AR, XT 30 and XT 30 AR asphalt roof shingles, as
<br />produced by CertanTeed Corporation, have demonstrated compliance with the Florida Building Code
<br />through testing in accordance with the Standards setforth herein. Compliance is subject to the
<br />Installation Requirements and Limitations / Conditions of Use set forth herein.
<br />2.. STANDARDS:
<br />on n Y r
<br />_ Prox.�1I .� �P._
<br />1507.2.5 Physical Properties ASTM D3462 2001
<br />1507.2.7 Wind Resistance ASTM D3161 (110 mph). 1999
<br />1505.1 Fire Classification UL 790 1997
<br />3. REFERENCES:
<br />Entity Examination Re erence Date
<br />Underwriters Labs. ASTM 03462 R684 09/21/2005
<br />La s. L 7 0 R684 0 22 2 O5
<br />Underwriters b U 9 9 0 1 /
<br />TM 0 7 Underwriters Labs. A5 D31.6,1 to 11 05CA16 T8 OS 12 2005
<br />Underwriters Labs, ASTM D3161 (to 110) 03CA12702 06/16/2003
<br />Underwriters Labs. ASTM D3161 (to 110) 99NK26506 1IJ23/1999
<br />Underwriters La . A TM 0 1 1 o it 0 CA127 2 27 2 Laos- S 3 6 (t 0) 3. 0 OS/ / 003
<br />Underwriters Labs. ASTM D3161 ( to 110) 05NK22800 06 22 2005
<br />Underwriters abs, ASTM 0 316 to 0 04 2 98 03 0. nderw L D 1 11 CA32 6 1 20 4
<br />Underwriters Labs. ASTM D3161 (to 110) 04CA11329 05/24/2004
<br />Underwriters Labs. ASTM D3161 (to 110) 05NK14836 05/22/2005
<br />Underwriters Labs. ASTM D3161 (to 110) 05NK07049 04/15/2005
<br />Underwriters Labs. ASTM D3161 (to 110) 99NK29506 11/23/1999
<br />Underwriters Labs. ASTM D3161 (to 110) QSNK16778 05/12/2005
<br />Underwriters Labs. ASTM 03161 (to 110) 94NK9632 05J1511996
<br />Underwriters Labs. ASTM 03161 (to 110) 03NK29847 10/03/2003
<br />Underwriters Labs. Quality Control R684 Current
<br />4. PRODUCT DESCRIPTION:
<br />4.1 Classic Horizon Shangle, CT 20, Cf20AR, Patriot AR, XT 25, XT 25 AR, XT 30 and XT 30 AR are
<br />fiberglass reinforced, 3-tab asphalt roof shingles.
<br />4.2 Carriage House Shangle, Centennial Slate, Grand Manor Shangle, Landmark 30, Landmark 30
<br />AR, Landmark 40, Landmark 40 AR, Landmark. TL and Landmark TL AR are fiberglass reinforced,
<br />laminated asphalt roof shingles,
<br />4.3 presidential Shake, Presidential Shake AR, Presidential Shake TL and Presidential Shake TL AR
<br />are fiberglass reinforced, architectural asphalt roof shingles,
<br />4A Hatteras is a fiberglass reinforced, 4-tab asphalt roof shingle,
<br />ERD Evaluation Report 3532,09.05
<br />FL5444
<br />Date of Issuance: 09/22/2005
<br />Page 2 of 3
<br />LuMITATIONS:
<br />L Refer to applicable hugiding code for required ventilation.
<br />2. The installation stud( lie applied in compliance with the manufacturers current published
<br />application instruction and the requirements set'fortli in applicable building code.
<br />>. This acceptance is for installations over asphaltic shingle roofs only.
<br />4. Weather Vents shall no be installed on roof mean heights greater than 33 feet,
<br />- accordance with the Flonda
<br />5, s listed herein strati have. a � a•s aria auchi Tn ac orlon
<br />- All ttct. lestuairt assurance Prod9 Y
<br />B-uilding Code and Rule 9B ;2 of the Florida Administrative Gracie,
<br />DR.ANYINGS
<br />ROOF FLANGE NAIL PLACEMENT
<br />END OF THIS ACCEPTANCE
<br />TIG,,
<br />FIGURE 1. FLASHING INSTALLATION
<br />r'FA,' eP+ ANT.
<br />LXTLN-' M.N. CF Fir
<br />NOA No 03-1008.02
<br />Expiration Date: 04/15/09
<br />Approval Dates 04/15/161
<br />Page 3 of 3
<br />wtaV
<br />Cert!/Jwte of AuthoNza[fon #9503
<br />S. LIMITATIONS:
<br />5.1 This Evaluation Report is not for use in the HVHZ.
<br />5.2 Fire classification is not part of this evaluation; refer to current Approved Roofing Materials
<br />Directory for fire rating of this product.
<br />5.3 Installation shall comply with manufacturer's current Published instructions, but not less than the
<br />requirements of FBC Section 1507.2.
<br />5.4 All products in the roof assembly shall have quality assurance audit in accordance with the
<br />Florida Building Code and F.A.C. Rule 9B-72.
<br />6. INSTALLATION:
<br />6.1 Installation shall comply with manufacturer's current published Instructions, but not less than the
<br />F 7 requirements of BC Section 150 _ .2.
<br />6.2 Where the roof slope exceeds 20 units vertical in 12 units horizontat (166-percent slope), special
<br />methods of fastening are required.
<br />7. LABELING:
<br />Each unit shall bear a permanent label with the manufacturer's name, logo, city, state and logo of the
<br />Accredited Quality Assurance Agency noted herein.
<br />BUILDING PERMIT REQUIREMENTS.
<br />B O G
<br />As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the
<br />installation of oils product.
<br />9. MANUFACTURING PLANTS:
<br />Contact manufacturer or Quality Assurance Entity for specific information on which plant produces
<br />Q ty Y Dec P
<br />which products: Avery -OH, Birmingham -AL, Ennis -TX, Freemont-CA, Norwood -MA, Oxford -NC,
<br />Peacbtree City -GA, Portland -OR, Shakopee -MN, Shreveport -LA, Wllminton-G4,
<br />10, QUALITY ASSURANCE ENTITY:
<br />Underwriters Laboratories - QUA1743
<br />- END OF EVALUATION REPORT -
<br />ERD Evaluation Report 3532.09.05
<br />FL5444
<br />Date of Issvanca: 09/22/2005
<br />Page 3 of 3
<br />Semco Off Ridge Vent Installation Detail
<br />Center vent in opening and set it in a 1/8" thick of asphalt
<br />roofing cement. Secure vent to roof deck with 1-1/4"
<br />galvanized ring shank roofing nails spacing approx. 8" o.c.
<br />and 1" from the outside edge of the flange. Use a
<br />rninimt tm of 18 nails per vent, Seal ail nails and vent
<br />an approved ASTM D 4586 roofing cement.
<br />1"-10" to top of cut out from ridge
<br />FICaURE 2: WALL FINISH
<br />LT
<br />f
<br />44,
<br />\ T 4a x t r %a to
<br />emi =ife.
<br />gut size 3 1/2" x 46r'
<br />It Base size 24" x 52"
<br />Min. 12 down from ridge Line to top of vent base
<br />Add 20 blocking
<br />on the flat under
<br />vent base
<br />FiG~:URE 3: CORNER DETAIL
<br />W
<br />0
<br />A
<br />= I
<br />FLASWING INSTALLATION
<br />-N WWERE ROOF MEETS VERTICAL WALL
<br />51
<br />l r1 3 RED AJT
<br />l.LIVEl A)LLEEY
<br />SeALAM1TTAEAFP ILP
<br />Lo' oNi
<br />BEHIND
<br />EHI i q HiG 6Ft
<br />�"T X Lu ❑ t-FN Flr ANr .X PN I, A,1
<br />iAENLNG t R wF FM�IV'—^�1 ,yi1N MlIWt 3f F
<br />V!RTK AL RISE OF FL A,.1't uQ
<br />r eK
<br />VER`rQhLVJALL ��� ' ai+J6cbJ1LL
<br />ATENTRY
<br />'cam. a a ER .:qF ii n
<br />R � \ i' �
<br />s
<br />firX
<br />H ♦. C",-�FJJ�Vv"
<br />FLASHING DETAILSBE
<br />NOTE: THIS 1JETAlL 15 REQUiRED
<br />Y1Nv
<br />AT ALL VERFICAL WALL INTtRSEC`IONS
<br />WI FH ROOT- VALLEYS & ROOF CRiCKE 's.
<br />FLASHING DETAIL AT CRICKET/KNEEWALL INTERSECTION
<br />-I;.EREF t5D41KWsT4TLsh0ET/5o (NO SCALE)
<br />DANSCO
<br />JJE ENGINEERING, LLC
<br />P.O. BOX 3400
<br />Apollo Beach, Florida 33572
<br />Phone: 813.645.0166
<br />Fax: 813.645.9698
<br />www.danscoengineedng.com
<br />CA 25948
<br />O
<br />O
<br />Ln
<br />W
<br />Z
<br />CD
<br />n
<br />L
<br />0 � M
<br />Q m CO
<br />M 1
<br />a W M N
<br />LL M
<br />Ln t-I
<br />C L CID
<br />Q
<br />; E
<br />W
<br />W w3~
<br />Z
<br />JO
<br />CO
<br />F—
<br />UJ
<br />U=
<br />::D�
<br />J
<br />0\Q
<br />CL O
<br />W
<br />'^ W
<br />�•/)
<br />CL
<br />I..L
<br />m
<br />Q
<br />THIS IS A NON ENGINEERED
<br />SHEET BASED ON PRODUCT
<br />APPROVAL INFORMATION
<br />LOCATED ON THE STATE OF
<br />FLORIDA'S PRODUCT
<br />APPROVAL SITE
<br />THIS DRAWING AND DESIGN IS VALID FOR 12 MONTHS
<br />AFTER THE DATE IT IS SIGNED AND SEALED.
<br />SIGNED AND SEALED FOR THE STRUCTURAL PORTION
<br />OF THIS DRAWING ONLY.
<br />02007-THESE DRAWINGS AND DESIGNS ARE THE JOINT
<br />PROPERTY OF DANSCO ENGINEERING, LLC AND THE
<br />CLIENT ON THIS PROJECT. ANY REPRODUCTION OR
<br />UNAUTHORIZED USE IS PROHIBITED.
<br />REVISION:
<br />DATE
<br />DESCRIPTION
<br />VERSION NO.
<br />SHEET TITLE:
<br />CERTAINTEED ROOFING
<br />& OFF RIDGE VENT
<br />SHEET INFORMATION:
<br />JOB NO.:
<br />DATE ISSUED: 09.04.07
<br />DRAWN BY: DZ
<br />REVIEWED BY: TH
<br />RD 1001
<br />yyN;.�
<br />Tf�
<br />CD
<br />Z_
<br />0
<br />�M
<br />W
<br />M
<br />O
<br />N
<br />L J
<br />1
<br />O
<br />V J
<br />r
<br />
|