|
Ai
<br />MIAMI-DADECOUNW
<br />PROD>r CTCONMOL SECiTM
<br />11805 Sty' 26 Stree4 Rooms 208
<br />DEPARTl1AENr OF REGULATORY A" ECO.NOAffC RESOURCES (r M) MumL Flor& 33175-2474
<br />BOARD AND CODE AD)1fi1Nr$TR&nONDrV 510_K T (726) 315-2390 F CM) 313-2i99
<br />NOTICE OF ACCEPTANCE (.NOA) *w*iabMidak-s"Memmy
<br />PGT Industries, Inc.
<br />1070 Technology Drive,
<br />North Venke, FL 34275
<br />SCOPE:
<br />This NOA is being issued under the apphcablemkes and regulations governing the use of congtructionmateriak The
<br />documentation submitted has been reviewed and accepted by hfsami-Dade County RER -Product Control Section to
<br />beundmMianisDadeCcualyand oar dress where allowed by do Autogity Having 106a iictim (MU).
<br />This NOA shall not be valid after the expiration date stated below- The Miami Dade County Product Control Sec tion
<br />(In Mtamt Dade County) and or the AHT (in arms other than Miami Dade County) res erne the right to have this
<br />product or material tested for quality assurancepurposes- If this product or material fails to pedosm in the accepted
<br />manner, the msaun&durer will incur the expense of such testing and the AlUmay immedistelyrevoke. ma dify, o r
<br />suspend the use of such product or material within their jusisdiction. RER reserves the right to revoke this
<br />acceptant- if it is determined by14&anu Dade County Product Control Section that this product or material fails to
<br />meet the requiuments of the applicable building code -
<br />This product is approved as described hesein and has been designed to comply with the Florida Building Code_
<br />including the High Velocity Hurricane Zone.
<br />DESCRIPTION: Series '"557M 770" Vmpl Sliding Gla ss Door (Reinforced) whro 900 & 13.0 torners-L2 I.
<br />APPRO►VALDOCtmL-N"T: DrawiscgNo. mD-557o #? Res-B, tilled "Vntyi Stiding GlassDoor NOA (IND' sheru
<br />1 through 21 of 21, preparedby maaufaeturrr dated 10.rt)5115 and last revised on 02/01,21, signed and sealed by
<br />A. Lycra Miller•, P.E.. beating the Miami -Dade County Ptodnet Control R,esision starry with the Notice of
<br />Acceptance number and expiration date by the Miami Dade County Product Control Section.
<br />11ISSME LM PACT RA=r G: Large anal Sma9Irks ile Impact Resistant
<br />limitations:
<br />1. See table 1 (sheets and table 2 (sheet D for applicable SGD unit sizes., design pressures; reinforcements
<br />glass types, sill riser (see tables B-18t B-2. streets 7-8) and anchor layout sheets requirements in 11 thru 16_
<br />2. Rigs White PVC, Tan (Non -white) Rigid PVC andBroveea coated (Painted or laminated) white RVd PVC to be
<br />labeled per reftxenced NOA's requiremmts.
<br />3. Egress operable doors trust comply with min clear width or height per FBC requirement as applicable.
<br />t. Pocket walls under separate approval, to be reviewed by Building official
<br />L ABEIXNG: Each unit shall bear a pennanent label with the mamsfacturer`s name or logo. city. state and series and
<br />following stawm mu. "Miami -Dade County Product Control Approved", noted herein.
<br />RENEWAL of this NOA shall be considered after a renewal application has been filed and there has beenno
<br />change m die applicable building code negatively affecting the performance ofthis product.
<br />TEIL►'' i MATION of this NOA will occur after the expiration date or if there has been a revisim or chop in the
<br />materials, use, and'or u1;arnifirture ofthe product or process. Misuse ofthis NOA as an endarsero nt of anygroduct,
<br />for sales. advertising or any otherputposes shall automatic allytesminate this NOA. Failure to coemplywith any
<br />section of this NOA shall be cause for termination and removal ofNOA.
<br />ADVERTLSEM. ENT: The NOAnumber preceded by the word Thami-Dade County: Florida, and lblh wed by the
<br />expiration date maybe displayed in adverbsmg literature- If anryponiion of the NOAis displayed_ then it shall be
<br />done in its entirety-
<br />L SPECTION: A copy ref this entire NOA shall bepro vided to the user by the manufacturer or its disufttors and
<br />shall be available fur won at the job site at the request of the Building Official.
<br />This NOA. remises & rtnem +iOA 1284419.05 and consists of ehispage 1 and a-6dewe pages E-1. E-21 E-3. E-4,
<br />E-5 c& E-6 as well as appro-W document mentioned aba+;u-
<br />The submitted documentation was m iewed by Ishaq I Clsa nda, PE.
<br />INIOA No.21-0205.03
<br />Expiration Dates April 1#, 2026
<br />�" 7 fi Approval Date:Marrk 29, 20.1
<br />Page 1
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPT 4-NCE: EVIDENCE SUTB IITTTD
<br />2. Evidence Submitted under previous submittal
<br />A. DRAWLNGS
<br />1. Drawing No. RID-5570.0 RevB, titled '`Vinyl Sliding Glass Door NOA (Lid". stets
<br />1 through 21 of 21, prepared by mannufacturer_ dated 10,05A 5 and last revised on
<br />04122+20, signed and sealed by A_ Lynn Miller, P.E.
<br />B. TESTS
<br />1. Test reports on: 1) Air Infiltration. Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Prue Test, Loading per FBC. TAS 202 94
<br />3) Water Resistance Test. per FBC, TAS 202-94
<br />4) Large Mime Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loadingper FBC, TAS 203-94
<br />along with marked -up dregs and installation diagram of all PGT Industries, Inc.
<br />representative units listed below and tested to qualify Dowsil 791 and Dowsil 993 silicones.
<br />prepared by Fenestration Testing Laboratory: Inc., Test Reports No.:
<br />FTL-7897, PGT PW5520 PVC Fixed Window (emit 6 in proposal), dated 09103114
<br />FTL-20-2107.1, PGT SGD780 Aim Sliding Glass Door (unit 7 in proposal) FTL-20-
<br />2107.2, PGTCA740 Alum. OutswingC.asemelt Window (unit 8 in proposal) FTL -20-
<br />2107.3, PGT PW7620A. Ahm imuurn Fixed Window (unit 9 in proposal) and FTL-20-2107.4.
<br />PGT PW7620A Aluminum, Fitted Window (unit 10 in proposal) dated 07113/20, all signed
<br />and sealed by Idalmis Ortega, PIE-
<br />C. CALCULATIONS
<br />1. Anchor verification cal ulatioms and structural analysis, complying with FBC 71
<br />Edition (2020), dated 04/22/20, prepared by manufacturer- signed and sealed by
<br />Anthony Lynn M�, RE.
<br />2. Glazing complies with ASTM E 1300-04, -09, 42 and -16.
<br />D. QU ALITI' ASSCrRANCE
<br />Miami Dade Department of Regulatory and Economic Resources (RER).
<br />E. 'LriTERIAL CERTMCAI ONS
<br />1. Notice of Acceptance No. 19 0305.02 issued to Kuraray America, Inc. fortheir
<br />"Trosifolt Ultr, aclear, Clear, and Color PVB Glass Interlayers'. oq&mg on
<br />07/08I24-
<br />2. Notice of Acceptance No.17-0803.02 issued toKuraray America, Inc. fortheir
<br />"SeetryGlavt, (Clear and White) Glass Interlayen", a xpift on OVOC23.
<br />3. Notice of Acceptance No. 18-1106.10 issued to Vision Extrusions Limited for their
<br />`gown Coated (Painted or Laminated) White Rigid PVC Exterior Extrusions
<br />for Windows and Doors". expiring on 09/3or24.
<br />4. Notice of Acceptance No_ 18-1106.11 issued to Vision Extrusions Limited for their
<br />series "VE 1000 Tan 202 and lighter shades (Non-Allikee) Rigid Cellular PVC
<br />Exterior Extrusions for Windows and Doors7% expiring on 1129.12 i_ 1 {
<br />I*aq L Chanda, P.E.
<br />Product Control knit Super -riser
<br />NOA Itio.:i-0=04.03
<br />EspirationDate: April 14, 2026
<br />Approval Dots: Xlexch 25, 2021
<br />E4
<br />PGT Industries, Inc.
<br />PGT Industries, Inc.
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANNCE: E`'IDENCE SUBMITTED
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUB3IIITED
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBMLTTED
<br />L Evidence submitted under previous NOA
<br />D. QUALITY ASSURANCE
<br />A. DRAWINGS
<br />B. TESTS (continued)
<br />L
<br />Miami Dade Department of Regulatory and Economic Resources (RER)-
<br />1- Manufachner's die drawings and sections.
<br />5. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />(Submitted under?V0A X& 11.-0167. 04)
<br />2) Uniform Static Air Pressrun Test. per FBC. TAS 202-04
<br />E. MATER.LAL, CERTffICATIONS
<br />2- Drawing No. MD-3570.0, titled "Vinyl Sliding Glass Door NOA (LM) % sheets 1
<br />through 21 of 21, prepared by m2nufacturm, dated 10105F15, with revision A dater!
<br />3) Water Resistance Test, per FBC, TAS 202-94.
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />1.
<br />Notice ofAcceptance No.15-0328.14 issued to Vision Extrusion Limited for their �
<br />""Idte Rigid PVC Exterior Extrusions for Windows and Doors". dated 08,43115M
<br />04105/17, signed and sealed by A. Lynn Miller_ P.E.
<br />5) Cyclic Word Pre re Loadingper FBC, TAS 203-94
<br />expiring on 09130119. .0
<br />6) Forced Entry Tea, per FBC, TAS 202-94
<br />2.
<br />Notice of Acceptance No.16-4920.08 issued to Vision Extrusion Limited for their 'IFE
<br />B. TESTS
<br />along with marked -up drawings and installation diagram of vinyl stuffing glass door, prepared
<br />1000 Tan 202 and lighter Shades (Nola -White) Rigid PVC Exterior Extrusions fna
<br />1. Test report on 1) Uniform Static Air Pressure Test, per FBC_ TAS 202-94
<br />by Fenestration Testing Lab_ Inc., Test Report No. FTL W49, dated 11106115, signed and
<br />Windows and Doors", dated 1210&16, cq*ing on 1212M 1_ �
<br />2) Large Missile Impact Test per FBC, TAS 201-94
<br />sealed by Idaknis Ortega, P. E_ (rest Mort revised on 12/04!15 and 02/11116)
<br />3-
<br />Notice of Acceptance No.1,"528.15 issued to Vision F-vtrusion Limited for then
<br />3) Cyclic Wind Pressure Loading per FBC, TAS V3-94
<br />diagram
<br />6. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />"Brown Coated (Painted or Laminated) N%like Rigid PVC Exterior Extrusions for
<br />=
<br />y
<br />along withmatketl-up drawings and installation ofvmyt sliding glass door, prepared
<br />2) Uniform Static Air Pressure Test, per FBC. TAS 202-94
<br />Windows and Doors", dated 09113115. expiring on 0913011.9-
<br />by Fenestration Testing Lab, Inc:, Test Report No. FTL 9717, dated 1107i 15- signed and
<br />3) �Uattr Rt�stance Test, per FBC, TAS 202A4.
<br />4-
<br />Notice of Acceptance No-16-0712.02 issued. to ENERGI Fenestration Solutions USA,
<br />a
<br />sealed by Idalmis Ortega, P. E_ (Test report revised on 02/15116 and 02,24116)
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />Inc. for their "TAN3040 and Lighter Shades (Non -White) Rigid PVC Exterior
<br />3:.!
<br />as C
<br />2. Test report on 1) Air Infiltration Test, per FBC. TAS 20294
<br />5) Cyclic Wind Pressrun Loadingper FBC, TAS 203-94
<br />Extrusions far 3 -endows and Doors" dated 09115116_ expiring on 0104121.
<br />CDE
<br />2) Uniform Static Air Prune Test, per FBC, TAS 202-94
<br />along with marked -up draw-.mp and installation diagram of vinyl sliding glass door, prepared
<br />5.
<br />Notice of Acceptance No-1"712.04 issued to ENERGI Fenestration Solutions USA,
<br />� 3
<br />3) Water R.e4stamce Test, per FBC. TAS 202-94_
<br />by Fenestration Testing Lab. Inc., Test Report No. FTL 8552, dated 12AW15, signed and
<br />Inc. for their "Bronze and Lighter Shades of Cap Coated Rigid P17C Exterior
<br />4) Large MisImpact Test per FBC, TAS 201-94
<br />sile
<br />sealed by Idalmis Ortega, P. E. (Test report revised on 02.n SP-016)
<br />Extrusions for Windows and Doors" tatted t}91151i6, expiring our O4i i6J20_
<br />5) Cyclic Wind Prue Loading per FBC, TAS 203-94
<br />7. Test report on 1) Uniform Static Air Pressure Test_ per FBC, TAS 20294
<br />6.
<br />Notice of Acceptance No-16-0712.03 issued to ENERGI Fenestration Solutes USA,
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />2) Large Missile Impact Test per FBC, TAS 201-94
<br />Inc- for their "White Rigid PVC Exterior Extrusions for VV indows and Doors" dated
<br />ii
<br />along withmarlced-up drawings and installations diagram of vinyl sliding glass door, Prepared
<br />3) Cyclic Wind Pressture Loading per FBC_ TAS 203-94
<br />08110117, expiring on 0128118_
<br />by Fenestration Testing Lab, Inc., Test Report No_ FTL 8546_ dated 1110Cu'15_ signed and
<br />along withmaaked-up dsaw-ings and installaation diatgram of vinyl sliding glass door, prepared
<br />7-
<br />Test reports No(s). 10-002-792(A), 1"&M0527. 535753-09- per ASTNE-84,
<br />sealed by Idaknis Ortega, P. E. (Test report revised on 0110446 and 02'11,2016)
<br />by Fenestration Testing* Lab_ Inc., Test Report No. FTL "38 (sanip1es A-1 thru A-22), dated
<br />ASTAM 1929 and ASIMM35. issued by EXOVA to Vision Extnls•ion for cellulosic
<br />3. Test report on 1) Air Infiltration Test, per FBC. TAS 202-94
<br />11 /19/10, signed and sealed by Jorge A- Causo, P. E- (Subu rbYeed under JV0.4 Nt. 11-
<br />composite material
<br />2) Uniform Static Air Pressure Test: per FBC, TAS 202.94
<br />010704)
<br />(Submitted under X0.4 A'& 114107 04)
<br />3) Water Resistance Test, per FBC, TAS 202-94
<br />8 Test report on 1) Air Infiltration Test, per FBC. TAS 202-94
<br />8-
<br />Notice of Acceptance No.14-0916.11 issued to Kuraray America_. Inc. for their
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />"Sentt-% Glas+lt (Clear and White) Interlayer. , expiring on 07104i 18.
<br />5) Cyclic Wind Presses Loading per FBC_ TAS 203-94
<br />3) Water Resistance Test, per FBC, TAS 202-94.
<br />9.
<br />Notice of Acceptance No.16-1117.01 issued to Rtnaray America, Inc- fbr t1.reir
<br />6) Forced Entry Test, per FBC, TAS 20294
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />"Trosifellt• U ltraclear, Clear and Color PVB Interlaser•s". expking on 07.V8,19.
<br />along with manned -up drawings and installation dragtam ofvM4 sliding glass door_ prepared
<br />5) Cyclic Armd Pressure Loadingper FBC, TAS 203-94
<br />by Feibestratian Testing Loeb, Inc., Test Report No_ FTL 5. ?, dated 121 115: signed and
<br />6) Forced Entry Test.. per FBC, TAS 202-94
<br />F. ST ATE34ENTS
<br />sealed by Idalmis Ortega, P. E. (Test report revised on 02115116)
<br />along withrmarked-up drawings and installation diagram of vinyl sliding glass door: prepared
<br />1-
<br />Statement letter of confommuice with FBC-5uEdifion (2,014) and FBC-60'Edidon
<br />4- Test report an 1) Air Infiltration Test. per FBC_ TAS 202-94by
<br />Fenestration Testing Lab, Inc- Test Report No_FTL 6337 (samples A-1 thin A-5j, dated
<br />(201-71 issued by manufacturer: dated 0&'14117, signed & sealed by Lynn Miller. P.E_
<br />2) Uniform Static Air Pressor` Test: per FBC, TAS 20294
<br />12"061I0, signed and sealed by Jorge A_ Cam, P. E. (Submitted rrxder A't3;4 j1Ta.11-
<br />2_
<br />Statement letter of no financial interest. dated 04/18117. issued by nmanilfacturer, signed
<br />3) Water Resistance Test, per FBC, TAS 202-94
<br />0107 09)
<br />& sealed by Lynn Miller, P.E.
<br />4) Up Nfissik Impad Tea per FBC, TAS 201-94
<br />3.
<br />Letterof Lab compliance, part of the above test reports.
<br />5) CyclicWind Pressure Loadingper FBC, TAS 203-94
<br />C. CALCIZ.ATIONS
<br />4.
<br />RER Test Proposal No.17-0387, dated 05/05117. signed by Ishaq Chanda.. P.E.
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />1- Anchor verification calculations and structural analysis, compiling with FBC-2014,
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door, prepareed
<br />02
<br />ppeeluared by PGT. dated 1209115and last revised on '15116_ signed and sealed by
<br />G. OTHER
<br />by Fenestration Testing Lab_ Inc-, Test Report No. FTL 95-0- dated 1210435, signed and
<br />AnthouyL hailer: P.E. (Submitted under.V0.4.Xv.151d10.A1),
<br />1.
<br />Notice of Acceptance No.15-1210.01, issued to PGT Industries, for their Series
<br />sealed by Idalmis Ortega, P. E_ (rest report revised air OD04116 and 02e11116)_
<br />2, Glazing � with ASTME-1300-09_
<br />-557012770" Vinyl Sliding Glass Door (Rearforxed) - L.MX". expiring on 04,114,21_
<br />1 r
<br />4(w � I ,
<br />hhaq L Claarb, P.E.
<br />Ishaq L Chanda, P.E.
<br />Uaq L Chanda PE.
<br />Product Control 'emit 5uperrisor
<br />Product Control !Unit Supervisor
<br />Product Control knit Supervisor
<br />NOA INo. 21-4205.03
<br />N0A No. :1-0:05.43
<br />NOA l�o. 21-0209.03
<br />Expiration Date: Apri1 I4, 2026
<br />Expiration Date- April 14. 2026
<br />Expiration Date: April 14, 2026
<br />Approval Date: D.3areh 25, 2021
<br />:Approval Dates March l;, 2021
<br />Apgrosa l Date: Ddarc% if, 2021
<br />E-1
<br />E-2
<br />E.3
<br />CGI Windows and Doors, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBWrTED
<br />E. MATERLAL CERTIFICATIONS (continue)
<br />5. QuaPart Super Spacer Standard complying with ASTM C518 Thermal Conductivity
<br />0.881 BTU -in/ hr. f1--F, ASIM F 1249 WVTR Pass; ASTM D3985 Oxygme Pass, AS IM E
<br />2190 I_G_ Durability Igo Fog Pass. (Submhwd underpretions XOA: -o.15 409 fly)
<br />6. Quanex Part Durase complying with ASTM C518 Tloemual Conductivity 2.22 BTU -in/
<br />hr fr-°F. ASTM F 1249 V4'VTR-Pass, ASTM D 1434 Argon Petameance Pass, ASTM E
<br />2189 LG_ Durability -No Fog, ASTM E 546 Dever Point Devekp meat 20°F in 48 brs_
<br />(Subm iWd underA10-4 A'tr 1 "469.05).
<br />7- Vision Exiturcions Ltd. Parts com p4ing with PVC-AAMA 303-13. Voluntary Specification
<br />for Rigid Polyvinyl Chloride (PVC) Exterior Profiles for Vision Exftud ns, Ltd. -VEX- I by
<br />AAMA Fenestration Exterior Profile Carti6cation Program (Sublt wed itnder.NO4 jVa 1S-
<br />04, 09. #S)
<br />S- Vision Fxtr.+rinnc Ltd- Parts complying with PVC--AAN14L 303-13-
<br />(Su+bmitfed under IN 0.4 Xo.15-0469.05)
<br />9. PVC-AAMA 303-13, Voluntary Specification for Rigid Polywinyl Cie (PVC) Exerior
<br />Profiles for Vision Ems, Ltd_ VEX-1 by AAMA FeneMafton. Exterior Profile
<br />Certification Program-
<br />10. Notice of Acceptance No. 18-1217.14 issued to Energi Ft'rnearation Solution, USA, Inc. for
<br />their "Tan 3040 & light shade (non -white) N%IdW Rigid PVC Exterior Extrusions for
<br />Windows and Doors", expiring on 02. 12 i .
<br />11. Notice of Acceptance No. 18-0122.02 issued to Energi Fenestration Solution, USA, Inc, for
<br />their series "'t like Rigid PVC Exrrt►rior Extrusions for Windows and Doors", espiting on
<br />02P-W3_
<br />12_ Notice of Acceptance No. 20--0203.03 issued to Energi Fenestration Sohrtion. USA, Inc. for
<br />their "Bronze & light shade cap coated White Rigid PVC Exterior Extrusions for
<br />Windows and Doors', expiring on 04,16,25.
<br />F. STATEhffNTS
<br />1. Statement letter of conformance to FBC 76 Edition (2020), dated 04,22120. issued by
<br />manufacturer, signed and sealed by Anthony Lyme Miller, PE.
<br />2. Statement letter of no financial interest and of independent, issued by manufaactureer, dated
<br />04118Q0, signed and sealed by Anthony Lynn Miller, P.E.
<br />3. Prue Labeling Aft document between PGT. dated 033OV15 and signed by all
<br />involved parties,
<br />G. OTHERS
<br />I- This x`+fiOA re-%Iw NOA# 17-0420.06 (PVTwICGI) and updates to FBC2020 ('To'Edition),
<br />expiring 04121.121-
<br />2- RER Test proposals #194155 dated 0111000 approved by Ishaq I. Chanda_ PE, expiring
<br />04114a 1-
<br />E -5
<br />iskaq L Chanda, P.E.
<br />Product Con" unit Supervisor
<br />XOA No. 21-0205.03
<br />Expiration Date: Apra 14,2016
<br />Approval Date: March 25, 2021
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPT A'N CE: EN'II)ENCE S11BWI'TED
<br />3. New Evidence Submitted
<br />A. DRAWINGS
<br />I. Drawing No. 3ID-5_570.0 Rev B, titled -Vinyl Sliding Glass Door NOA a , sheets I
<br />through 21 of 21, prepared by maniffactuser, darted 10/05/15 and Lut revised on 02101r21-
<br />signed and sealed by A- Lynn Miller, P.E.
<br />Note: This revision consists rephtcement of same existing installation screw with flat head-
<br />B. TESTS
<br />1. None.
<br />C. CALCUILATION.S
<br />1_ None-
<br />D. QUALM A.SSUR ACE
<br />1. Miami -Dade Department of Regulatory and Economic Resources (RER).
<br />E, XLAXERLAL CERTIFICATIONS
<br />I_ Notice. of Acceptance No.19-0305.02 issued toKararay America, Inc. fortheir
<br />"Trosifolt U11traclear, Clear, and Color PXB Glass Iuterlayers", expiring on 07VS!24.
<br />2. Notice of Acceptance No.17-0808.02 issued toKuraray America, Inc. for their
<br />"SentryGlasl. (Clear and'"elute) Glass Lnterlayers", exp;rmg on 07104123-
<br />3_ Notice of Acceptance No.18-1106.10 issued to Vision Exttusions Limited for their `Brown
<br />Coated (Painted or Laminated) Mike Rigid PVC Exterior Extrusions for Windows
<br />and Doors". expiring on 09130124.
<br />4- Notices ofAeceptance No-18-1106.11 issued to Vision Extras Limited for their series
<br />"VE 1000 Tan 202 and lighter shades (lion-t37te) Rigid Cellular PVC Exterior
<br />Extrusions forNVTndows and Doors"; expiring on 1129/21.
<br />F. STATEMENTS
<br />1- Statement letter of conformance to FBC 76 Edition (2020), dated 021UL21. issued by
<br />manufacturer, signed and sealed by Anthony Ly1m Miller, PE.
<br />2- Private Labeling Agreement dated 03MQ I between PGT Industries: Inc. and CGI
<br />Windows and Doors Inc.- signed by Dean M. Ruadc, P.E., V.P. Engineering. on behalf of
<br />both companies-
<br />G. OTHERS
<br />1. Tliis NOA revises & renews NOA# 20-0429.05 (PLA w/CGI), expiring 04114�26.
<br />2. The current associated PLA CGI file #21-0205.01, expiring 04/140-6.
<br />E -6
<br />15t-7 (. z4n.
<br />Ishaq L Chan", P.E.
<br />Product Coated Unit Supervisor
<br />NQA '.No, 1.1-0205.03
<br />Expiration Dane: April 14, 2026
<br />Approval Dane: March 25, 2021
<br />N
<br />N
<br />Cl)
<br />Cu
<br />O
<br />O
<br />U
<br />L
<br />Q
<br />�
<br />O
<br />0
<br />C
<br />.CD
<br />CD
<br />U
<br />-
<br />a
<br />'0
<br />0
<br />N
<br />a
<br />c
<br />2
<br />C=
<br />O
<br />L.L.
<br />O
<br />.�
<br />N
<br />O
<br />a
<br />Ccn,
<br />0
<br />Q.
<br />�o
<br />o
<br />� N
<br />x
<br />. a
<br />r i
<br />Y
<br />Z
<br />Z
<br />W
<br />J
<br />CU
<br />O
<br />Q
<br />Q
<br />U
<br />O
<br />SHEET NO.
<br />PA 1.4.
<br />March 6, 2023
<br />
|