|
M
<br />EDICAL C�,43 NOT�3
<br />EDICAL GAS SYSTEM DRAWINGS HAVE BEEN DEVELOPED FROM EXISTING
<br />RD DRAWINGS WHICH MAY NOT REFLECT ACTUAL FIELD CONDITIONS. THE
<br />ACTOR SHALL VERIFY THESE DRAWINGS WITH EXISTING FIELD CONDITIONS
<br />ND NOTIFY THE ARCHITECT/ENGINEER IMMEDIATELY OF INCONSISTENCIES
<br />EN THE DRAWINGS AND ACTUAL CONDITIONS BEFORE PROCEEDING WITH
<br />RUCTION.
<br />ONTRACTOR SHALL NOtfFY THE ARCHITECT /ENGINEER fMMEDIATELY
<br />OF THE WORK INDICATED IN THE CONTRACT DOCUMENTS CANNOT
<br />RFORMED DUE TO EXISTING FIELD CONDITIONS.
<br />3. THIS CONTRACTOR SHALL FURNISH AND INSTALL COMPLETE MEDICAL GAS
<br />SYSTEMSt INCLUDING ALL ASSOCIATED DEVICES, EQUIPMENT AND CONNECTIONS
<br />TO EXISTING SERVICES, SUPPORTS, AND HARDWARE REQUIRED FOR TESTING,
<br />AND FOR SATISFACTORY OPERATION OF THE SYSTEMS.
<br />4. THIS CONTRACTOR SHALL PROVIDE ROUTING AND OFFSETS NECESSARY TO
<br />AVOID CONFLICT WITH STRUCTURE, FINISHES, AND WORK OF OTHER TRADES.
<br />5. WALL AND PARTITION CONSTRUCTION AND THICKNESS FOR MEDICAL GAS
<br />OUTLETS, VALVES t PIPING AS INDICATED SHALL BE AS PER EQUIPMENT
<br />MANUFACTURERS RECOMMENDATIONS AND APPROVED SHOP DRAWINGS.
<br />6. THE MEDICAL GAS PIPING SYSTEM SHALL BE INSTALLED IN ACCORDANCE
<br />WITH NFPA-99 (2005) STANDARDS,
<br />APPLICABLE CODES,
<br />REGULATIONS AND EQUIPMENT MANUFACTURER'S RECOMMENDATIONS.
<br />1. ALL MEDICAL GAS WALL OUTLETS SHALL BE CHEMTRON COMPATABLE CONNECTION
<br />STYLE UNLESS OTHERWISE NOTED -
<br />CONTRACTOR TO FIELD VERIFY COMPATA151LITY OF ALL MED GAS OUTLET
<br />REQUIREMENTS PRIOR TO CONSTRUCTION.
<br />5. THE NEW MASTER AND AREA ALARM PANELS SHALL BE
<br />TESTED BEFORE FINAL AHCA INSPECTION. PROVIDE ALL LABOR
<br />AND MATERIAL FOR PROPER OPERATION OF THE ALARM SYSTEM.
<br />9. AFTER COMPLETION OF THE SYSTEM INSTALLATION, THE SYSTEM SHALL
<br />BE PURGED AND TESTED AS OUTLINED IN NFPA-99 (2005). PLUMBING
<br />CONTRACTOR SHALL PROVIDE THE OWNER W/TEST REPORT AND MEDICAL
<br />GAS SYSTEM CERTIFICATION DOCUMENT PRIOR TO USE OF THE SYSTEM.
<br />10. SEE PLAN FOR MEDICAL GAS PIPE SIZING.
<br />11. MEDICAL GAS PIPING SHALL BE SEAMLESS COPPER TUBING, TYPE "K" OR
<br />"L", HARD TEMPER, ASTM 8-819 FOR ASSEMBLY WITH SOLDERED FITTING AND
<br />SHALL BEAR OF THE FOLLOWING MARKINGS: OXY, MED, OXY/MED, ACR/OXY
<br />OR ACR/MED. PIPING DELIVERED ON SITE FOR MEDICAL GAS INSTALLATION
<br />SHALL BE CLEANED AND CAPPED ON BOTH ENDS. FITTING AND JOINTS SHALL
<br />BE WROUGHT COPPER DESIGNED FOR BRAZING. FOR PIPING ASSEMBLY AN
<br />APPROVED SILVER BRAZING ALLOY (BAG SERIES) HAVING OVER 1000 F
<br />DEGREES MELTING POINT TEMPERATURE SHALL BE USED. AIRCOSIL FLUX OR
<br />EQUAL SHALL BE EMPLOYED. BORAX AND ALCOHOL MIXTURES OR RESINS AND
<br />SIMILAR PASTE FLUXESSHALL NOT BE USED
<br />12. CONTRACTOR SHALL SUBMIT SHOP DRAWINGS FOR ARCHITECT / ENGINEERS
<br />APPROVAL FOR ALL EQUIPMENT AND MATERIAL SHOWN OR SPECIFIED ON THE
<br />DRAWINGS.
<br />13. PROVIDE APPROVED MEDICAL GAS IDENTIFICATION MARKS FOR ALL
<br />MEDICAL GAS PIPING. MAXIMUM DISTANCE BETWEEN MARKS SHALL BE
<br />MAX. 15'-0"
<br />14. THE ENTIRE INSTALLATION AND WORKMANSHIP SHALL BE GUARANTEED
<br />FREE FROM DEFECTS FOR A PERIOD OF ONE (1) YEAR OF FINAL
<br />ACCEPTANCE AND CERTIFICATIONS.
<br />15. PROVIDE MEDICAL GAS SYSTEM CERTIFICATION REPORT BEFORE
<br />FINAL INSPECTION. CERTIFICATION TO BE PROVIDED BY INDEPENDENT THIRD
<br />PARTY AGENCY SUCH AS MCMC OR EQUAL.
<br />16. ALL LOW VOLTAGE ALARM WIRING t0 BE PULLED t INSTALLED BY MEDICAL GAS
<br />EQUIPMENT SUPPLIER AND TO INCLUDE FINAL TERMINATIONS.
<br />O MEDICAL GAS NOTES, EQUIPMENT SCHEDULES t LEGEND
<br />N.i.5.
<br />MEDICAL GAS SET INDEX
<br />MG1 MEDICAL GAS NOTES, SCHEDULES t LEGEND
<br />MG2 MEDICAL GAS FLOOR PLAN
<br />MG3 MEDICAL GAS DETAILS
<br />MEDICAL GAS LEGEND
<br />DESCRIPTION
<br />SYMBOL
<br />NEW VACUUM PIPING
<br />— — — —V— — — —
<br />NEW OXYGEN PIPING
<br />0
<br />NEW POINT OF CONNECTION
<br />NEW PRESSURE TRANSDUCER SWITCH
<br />■
<br />NEW MASTER AREA ALARM PANEL
<br />r-=
<br />MEDICAL GAS WALL OUTLET
<br />T_= O
<br />NEW GAS ZONE VALVES AND BOX
<br />W/PRESSURE GAUGE ASSEMBLIES
<br />A.HJ.
<br />AUTHORITY HAVING% JUR16DICTION
<br />U.OTL
<br />UNLESS OTHERWISE NOTED
<br />AFF
<br />ABOVE FINISHED FLOOR
<br />P:C.
<br />PLUMBING CONTRACTOR
<br />G C.
<br />I GENERAL CONTRACTOR
<br />MEDICAL N��E QUIF MENT 3CNEDULE
<br />MARK
<br />DESCRIPTION
<br />MARK
<br />DESCRIPTION
<br />OUTLET
<br />OWALL
<br />ONE (l) OXYGEN (1) VACUUM OUTLET t ll) WALL SLIDE
<br />THE VACUUM PUMP PACKAGE ASSEMBLY SHALL INCLUDE DIRECT DRIVEN VACUUM PUMPS,
<br />MEDICAL SERVICE OUTLETS SHALL BE CONCEALED WALL OUTLETS, COMPLETE ASSEMBLY
<br />GAL VACUUM RECEIVER (ASME CODE STAMPED), INTAKE PIPING, FLEXIBLE
<br />TYPE G>111CK-CONNECT CHEMTRON COMPATIBLE FROM AMIGO:
<br />CHE
<br />CONNECTORS, ISOLATION VALVES, CHECK VALVES, NTERWNNECTING PIPING AND FITTINGS,
<br />FORQJICOXYGEN: �N CT -OXY
<br />DUPLEX CONTROL SYSTEM (NEMA 12 t U.L. LABELED), THE CONTROL SYSTEM SHALL
<br />PROVIDE AUTOMATIC LEAD/LAG SEQUENCING WITH CIRCUIT BREAKER DISCONNECTS FOR
<br />FOR VACUUM: 40-CHWAL-U-VAC
<br />EACH VACUUM PUMP WITH EXTERNAL OPERATORS, FULL VOLTAGE MOTOR STARTERS WITH
<br />WALL SLIDE 00-WALOLIDE
<br />OVERLOAD PROTECTION, REDUNDANT 120V CONTROL CIRCUIT TRANSFORMERS, VISUAL AND
<br />AUDIBLE RESERVE UNIT ALARM, WITH ISOLATED CONTRACTS FOR REMOTE ALARM,
<br />ATT
<br />LOW t HIGH PRESSURE SWITCHES
<br />HAND -OFF -AUTO LIGHTED SELECTOR SWITCHES AND RUNTIME HOURMETERS. PROGRAMMABLE
<br />HIGH -LOW LINE PRESSURE SWITCH FOR OXYGEN, NITROUS OXIDE, MEDICAL AIR, CARBON DIOXIDE t
<br />LOGIC CONTROLLER (PLC) SHALL CONTROL THE AUTOMATIC ALTERATION OF BOTH VACUUM
<br />VACUUM SERVICES SHALL BE LOCATED ON THE PIPE LINES AS PER NFPA-99 (2005) STANDARDS.
<br />PUMPS WITH PROVISIONS FOR SIMULTANEOUS OPERATION IF REQUIRED, AND AUTOMATIC
<br />THE SWITCHES, DISS DEMAND CHECK PORTS, AND PRESSURE SWITCHES SHALL BE AMICO
<br />ACTIVATION OF RESERVE UNIT IF REQUIRED. THE CONTROL SYSTEM SHALL INCLUDE AN
<br />PART NUMBER AS LISTED BELOW OR APPROVED EQUAL.
<br />AUTOMATIC MINIMUM RUN TIME ADJUSTMENT TO CONTROL RUN TIME BASED ON DEMAND. THE
<br />PRESSURE SWITCHES:
<br />VACUUM GAUGES SHALL BE PROVIDED IN THE CONTROL PANEL.
<br />• M-PRSW-OXY FOR OXYGEN,
<br />THE SYSTEM SHALL BE AMICO MODEL NO. V-RVL-D-080-TS-N-015 WITH, IB HP CONTINUOUS
<br />0 M-PRSW-VAC FOR VACUUM
<br />DUTY NEMA RATED, C-FACE, OPEN DRIP PROOF, IWO RPM, MOTOR FOR 480V, 60 HERTZ, 3
<br />PHASE ELECTRICAL SERVICE. THE SYSTEM CAPACITIES SHALL HAVE A MINIMUM OF 1 SCFM •
<br />CHECK PORTS:
<br />19' Hg PER SINGLE VACUUM PUMP (RESERVE VACUUM PUMP ON STANDBY) AS PER NFPA-99
<br />M/-CHK- PIPE SIZE AS REQUIRED FOR OXYGEN,
<br />(2005) STANDARDS REQUIREMENTS.
<br />PRESSURE GAUGES:
<br />M M-PRSW-GA (0 - 100 PSI) FOR PRESSURE GASES,
<br />"M-PRSW-GA-VAC FOR (0 - 30 Hg) FOR VACUUM.
<br />ALL COMPONETNS INSTALLED AS PER MANUFACTURERS RECOMMENDATION)
<br />OYGEN MANIFOLD:
<br />AUTOMATIC CHANGE OVER MANIFOLD ASSEMBLED AND TESTED SHALL BE AMIGO NEMA 4
<br />PRESSURE GAUGES:
<br />(WEATHER -TITS RATED) (1) fM2-HD-DL-HH-U-OXY MANIFOLD, 2 X 2 M2-H5XC-04U-OXY
<br />%-130112-00 FOR (0 - 100 PSI) FOR PRESSURE GASES,
<br />HEADER BARS
<br />N 6-130111-00 FOR (0 - 30 Hg) FOR VACUUM.
<br />SVl
<br />S BODY, AND
<br />ISOLATION T- VALVES BALL TYPE (DOUBLE SEAL) WITH CAST , THE VALVES
<br />LOCKING DEVICE t CHROME -PLATED BRASS 8,41.E t tEFLON SEALS, THE VALVES SHALL BE AMIGO
<br />MEDICAL GAS MANIFOLDS:
<br />AUTOMATIC, MICROPROCESSOR BASED DIGITAL CHANGE OVER MANIFOLDS, TESTED, FULLY ASSEMBLED IN
<br />WATER TIGHT ENCLOSURE, SWITCHING POWER SUPPLY, WITH BUILT IN FUSE AND THERMAL BLOCKS, TWO
<br />PRODUCTS MODEL NUMBERS:
<br />HEADER BAR ASSEMBLY WITH CHECK VALVES AND WITH HIGH PRESSURE HOUSES FOR OXYGEN,
<br />OXYGEN TO BE 0S-VV-ISO-GL-05, VACUUM N 5-VY-160-GL-12
<br />SERVICES SHALL BE AMICO
<br />NUMBER FOR EACH SPECIFIC GAS SERVICE SHALL BE AS SPECIFIED. EACH ASSEMBLY SHALL INCLUDE:
<br />- WALL MOUNTING BRACKETS FOR ENCLOSURE, HEADER AND CYLINDERS,
<br />- ONE MANIFOLD BLOCK ASSEMBLY (INCLUDES INSTALLATION VALVES, CHECK VALVES, RELIEF VALVES,
<br />®
<br />COM51RATION MODULAR MASTER/AREA ALARM PANEL (RECESSED WALL MOUNTED)
<br />BLEED VALVE, AND DELIVERY LINE PRESSURE GAUGES, t ALARM SIGNAL CONNECTIONS),
<br />- TWO VALVE AND CROSS ASSEMBLIES,
<br />DIGITAL MODULE AREA ALARM PANEL FOR MEDICAL GAS SYSTEM SHALL BE AMIGO
<br />- TWO BANK REGULATOR ASSEMBLIES (INCLUDES INTERMEDIATE AND BANK PRESSURE GAUGES,
<br />AND SHALL INCLUDE:
<br />- TWO BLANK TUBES,
<br />- TWO LINE PRESSURE REGULATOR ASSEMBLIES,
<br />ROUGH- IN ASSEMBLY ASSEMBLY,
<br />MULTI -SIGNAL ALARM MODULES,
<br />- TWO LINE TUBES,
<br />- TWO BANK REGULATOR STOP KITS,
<br />ANNUNCIATOR MODULE,
<br />- ONE PRESSURE SWITCH,
<br />- OTHER HARDWARE WITH REQUIRED NUMBER OF BLIND GLANDS AND UNION NUTS, AND PIGTAILS.
<br />WITH REMOTE SENSORS
<br />MASTER ALARM MODULES SHALL DISPLAY CANCELABLE AUDIBLE t NON -CANCELABLE VISUAL SIGNALS At
<br />AND PIGTAILS.
<br />IN COMPLIANCE WITH NFPA-SS (2005) AND APPROPRIATELY LABELED FOR EACH REQUIRED SIGNAL.
<br />FOR TREATMENT ROOM AND FOR PATIENT CHANGE / RECOVERY ROOM AND EXAM -FITTING ROOM
<br />TWO ZONE VALVES AND BOX ASSEMBLIES W/PRESSURE GAUGES
<br />®
<br />SHUTOFF VALVE SHALL BE BALL -TYPE (DOUBLE SEAL) WITH CAST BRONZE BODY, QUARTER
<br />MASTER/AREA ALARM PANEL SHALL BE PART •A2AL-D-OXY-VAC-OXY-VAC-MIN
<br />TURN, AND CHROME PLATED BRASS BALL, PRESSURE GAUGES FOR OXYGEN AND VACUUM
<br />SERVICES COMPLETE ASSEMBLY FOR RECESSED VALVE BOX.
<br />THE VALVE SHALL BE AMICO • Z-V5U-M1205 WITH PRESSURE GAUGES. (SEE PLAN FOR
<br />LOCATIONS)
<br />NOTES:
<br />1. PROVIDE IDENTIFICATION SIGNS BY MEANS OF DURABLE TAGS, NAMEPLATES OR LABELS FOR ALL SERVICE 4. COORDINATE WITH ELECTRICAL CONTRACTOR LOCATIONS AND ELECTRICAL CHARACTERISTICS FOR ALL ITEMS
<br />ZONE VALVES t PIPING SYSTEM AND EQUIPMENT ACCORDING TO NFPA-99 ( 2005) STANDARDS. REQUIRING ELECTRICAL SERVICE.
<br />2. THE NEW CEILING MOUNTED MEDICAL GAS OUTLETS SHALL BE DISS STYLE. OUTLETS SHALL BE 5. PROVIDE IDENTIFICATION LABELS FOR NEW ISOLATION VALVES IN CEILING SPACE.
<br />INSTALLED AS INDICATED ON PLANS. 6. BEACONMEDAES MEDICAL GAS, WESTERN, ALLIED HEALTHCARE PRODUCTS, INC., HILL -ROM A HILLENBRAND IND,
<br />3. THE NEW WAL MOUNTED MEDICAL GAS OUTLETS SHALL BE C14EMTRON COMPATIBLE STYLE. TRI-TECH MEDICAL INC. EQUIPMENT TO BE AN EQUAL MANUFACTURER SUBJECT TO OWNERS APPROVAL.
<br />OUTLETS SHALL BE INSTALLED AS INDICATED ON DRAWINGS.
<br />REVISIONS
<br />BY
<br />f,
<br />00
<br />�--� ao
<br />U � co
<br />CO N
<br />r� o p00 �
<br />ti o
<br />�xti Y
<br />_ U
<br />�••� N in N Y
<br />N G k
<br />y O ro
<br />O LO
<br />Q O O
<br />Y 3 ti 3
<br />tiN .
<br />0
<br />•—� � ti ate,
<br />� � N
<br />10
<br />a
<br />° `, 9 P® 411
<br />0. s
<br />°
<br />�w
<br />ors �o
<br />ce) ^ A
<br />0
<br />=a
<br />a m
<br />Z �m
<br />C c LL$
<br />o2 V �$
<br />G
<br />� a
<br />C E
<br />w ��
<br />00
<br />E Us
<br />� UZ
<br />U �m
<br />'m
<br />>
<br />-o In > s
<br />Q _m� .W
<br />m
<br />w�LQ ma
<br />a s"
<br />O O r
<br />a `a
<br />(J
<br />� U
<br />Z J
<br />CL () Z m
<br />w W v�
<br />-o —� U
<br />C Q (/) O
<br />Q UW
<br />��
<br />o 0=�v�
<br />Q L _
<br />W p •—
<br />D
<br />o�U�
<br />C-
<br />aCi Q o
<br />00
<br />MN
<br />-LLJ
<br />-� 0
<br />'3 J D
<br />m
<br />Date: 06. 12. 12
<br />Scale: AS NOTED
<br />Project Mgr: AAY
<br />Drawn:
<br />Job: 10-61
<br />Sheet
<br />MG1
<br />
|