|
�O
<br />Ln
<br />N
<br />0
<br />W1 O
<br />N
<br />N
<br />;,,
<br />1W
<br />N
<br />A
<br />Q0
<br />*1 O
<br />`
<br />V•
<br />N
<br />C
<br />e
<br />Design -No. U46S
<br />Nonbearing Wall Rating-1 HR.
<br />b
<br />1. Floor and Ceiling Runners —(not shown) —Channel shaped runners,
<br />3-5/8 in. wide (min), 1-1/4 in, legs, formed from No. 25 MSG (min) galy
<br />steel, attached to floor and ceiling with fasteners spaced 24 in. OC max.
<br />2. Steal Studs —Channel shaped, 3-5/8 in. wide (min), 1-1/4 in. legs, 3/8
<br />in, folded back return$, formed from No. 25 MSG (min) galy steel spaced
<br />24 in. OC max.
<br />3. Batts and Blankets* —(Optional) —Mineral wool or glass fiber batts
<br />partially or completely filling stud cavity.
<br />See Batts and Blankets (BZJZ) category for names of Classified companies.
<br />4., Wallboard, Gypsum*-5/8 in. thick, 4 ft wide, attached to steel studs
<br />and floor and ceiling track with 1 in, long, Type S self -tapping steel
<br />screws spaced 8 in. OC. along edges of board and 12 in. OC in the field
<br />of the board. Joints oriented vertically and staggered on opposite sides
<br />of the assembly. When attached to item 6 (furring channels), wallboard
<br />is screw attached to furring channels with 1 in. long, type S steel screws
<br />spaced 12 in. OC.
<br />Boral Gypsum Inc. —Type BG-C.
<br />Canadian Gypsum Company —Types AR, C, IP-X2, SCX, SHX, WRC
<br />or WRX.
<br />Continental Gypsum Company —Type CG-C.
<br />Eagle -Gypsum Products —Type EG-C.
<br />G-P Gypsum Corp. —Types 5, 9, C, GPFS6, GPFS-C.
<br />National Gypsum Co., Charlotte, NC —Types FSK-G, FSW-G.
<br />National Gypsum Co., Riyadh, Saudi Arabia —Type FR or WR.
<br />Pabco Gypsum Co. —Type PG-C.
<br />Republic Gypsum Co. ---Type RG-C.
<br />Standard Gypsum Corp. —Type SG-C.
<br />Temple-Inland Forest Products Corp. --Type TP-5.
<br />United States Gypsum Co. --Type AR, C, IP-X2, SCX, SHX, WRC or
<br />WRX.
<br />Veso Panamericano SA de CV —Type AR, C, IP-X2, SCX, SHX, WRC
<br />or WRX.
<br />iNestroc Industries Ltd, ---Type Westroc Fireboard.
<br />4A• Wallboard, Gypsum* ---(As an alternate to Item 4)—Nom 3/4 in. thick,
<br />4 ft wide, installed as described in Item 4 with screw length increased to
<br />1-1/4 in.
<br />Canadian Gypsum Company —Type AR.
<br />United States Gypsum Co. ---Type AR.
<br />Veso Panamericano SA de CV —Type AR.
<br />4B. Wallboard, Gypsum* —(As an alternate to Items 4 and 4A) —5/8 in,
<br />thick installed as described in Item 4. Joint covering ' (Item 5) not
<br />required.
<br />Canadian Gypsum Company --Type WSX.
<br />United States Gypsum Co.. -Type WSX.
<br />Veso Panamedcano SA de CV ---Type WSX.
<br />5. Joint Tape and Compound ---Vinyl, dry or premixed joint compound,
<br />applied in two coats to joints and screw heads; paper tape, 2 in. wide,
<br />embedded in first later of compound over all joints. As an alternate,
<br />nominal 3/32 in. thick - gypsum veneer plaster may be applied to the
<br />entire surface of Classified veneer baseboard. Joints reinforced.
<br />6. Furring Channel--(Optional-Not Shown) Resilient 25 MSG galy steel
<br />furring channels spaced vertically max 24 in. OC. flange portion -attached
<br />to each intersecting stud with 1/2 in. long type S712 panhead steel
<br />screws.
<br />*Bearing the UL Classification Marking
<br />edges.
<br />NATIONAL GYPSUM CO - Types FSW, FSW-B.
<br />4. Gyps m Board* --- 1/2 in. thick, ;4 ft wide wallboard applied vertically in two layers. Inner or base layer attached to
<br />studs with 1 in. long Type S self -drilling, self -tapping bugle head steel screws spaced 24 in. OC along the edges and in the
<br />field of the boards. Outer or face layer attached to studs and channel track with 1-5/8 in. long Type S self -drilling, self -
<br />tapping bugle head steel screws spaced 12 in. 'along the edges and in the field of the boards, staggered from screws in
<br />inner layer. When Furring Channels ('Item 2C)'are used, inner or base layer attached to furring channels with 1 in. long
<br />Type S self -drilling, self -tapping 'bugle head steel screws. Outer or face layer attached to furring channels with 1-5/8 in.
<br />long Type S self -drilling, self -tapping bugle head steel screws spaced 12 in. OC and staggered 12 in. from base layer
<br />screws. Joints between inner and outer layers staggered, fluter layer joints covered with paper tape and joint compound.
<br />Exposed screw heads covered with joint compound.
<br />AMERICAN GYPSUM CO— Type AG-C
<br />POLTROON
<br />0
<br />121812011 3:19:29 PM ...\CD\A5-0 UL Detalls.dgn
<br />CERTAINTEED GYPSUM INC -- ProRoc Type C.
<br />CEiR:TAINTE'ED GYPSUM CANAD INC -- ProRoc Type C.
<br />Project No. 11007.00
<br />A5eO
<br />Q 2011 BIV PK Architects, Inc.
<br />
|