|
MIAMI liIAMI-DADECOU.1, li-
<br />t PRODUCTCONTROL SECTION
<br />1180�. SR`'-6 Street Room 208
<br />DEPARTSSENTOF REGULATORY AND ECONOWC RESOURCES MER) M-mi Flonda 33175-2474
<br />BOARDA-ND CODE A.DMINISTRAnONDIVISION T (7S6) 3I5 2500 F (786) 315-2594
<br />NOTICE OF A C' CEPT ANCE (NOA) www.miawidade_rovreconomF
<br />PGT Industries, Inc.
<br />1070 Technolo&- Dtive,
<br />North'-enice. FL 34275
<br />SCOPE:
<br />This NOA is being issued wider the applicable rules and regulations goveming the use of constructionmatetials. The
<br />documentation submitted has been renewed and accepted by Miami -Dade County RER -Product ControlSection to
<br />be uwd in 1 it= Dade Coutmty and other turea4 where allowed by the Authority Havig Jurisdiction (AH,).
<br />This NOA shall not be valid after the expiration date stated below- The Miami -Dade County Product O mtrol Section
<br />(In Miami Dade County) andorthe AHJ (in areas other than Miami Dade County) reserve the right to have this
<br />product or material tested for quality assurwxe purposes. If this product or material fails to perform in the accepted
<br />manner, the inatmfactures will incur the expense of such testing and the AHJ may immediately rev oke. mo di fy, or
<br />suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this
<br />acceptance. if it is determined bylfiami-Dade County Product Control Section that this product or serial fails to
<br />meet the requirements of the applicable building code_
<br />This product is approved as describedherein and has been designed to comply with the Florida Building Code_
<br />including the High Velocity Hurricane Zone
<br />DESCRIPTION: Series "5570/2770" V invl Slitting Gla ss Door (Reinforced) w/wo 900 S 1350 corners-L.-M.I.
<br />APPROVAL DOCt3EF_\-'P: Drawing No.1ID-5570.0 Rev B. titled "Vmyl Sliding Glass Door NOA (L1vij'.. streets
<br />1 through 21 of 21. prepared by manufacturer, dated 1 Or05j 15 and last revised on 021'01,21. signed and sealed by
<br />A. Lvnn Miller. P_E_ bearing the Nl ami-Dade County Product Control R:eilsion stamp with the Notice of
<br />Acceptance number and expuution date by the Minim -Dade County Product Control Sechou
<br />'XiissILE LmPACT RATLVG: Large and SrnallMissile Impact Resistant
<br />Limitations:
<br />1. See table I (sheet 7) and table 2 (sheets forappheable SGD unit sizes. destgn pressures. reinforcements types.
<br />glass types. sill user (see tables B-1 & B-2. sheets 7-8) and anchor layout sheets requirements in l I thru 16.
<br />_'. Rigid Write PVC_ Tan (Non -white) Rigid PVC and.Brown coated (Painted or laminated) white Rigid PVC to be
<br />labeled per referenced NOA's requiremrnts.
<br />3. Egress operable doors must comply with min clear width or height per FBC requirement. as applicable.
<br />4. Pocket walls under separate approval. to be re aevwed by Building official
<br />LABELING: Each unit shall bear a permanent label with the manufacturer's, name or loge. city. state and series and
<br />followine statement: "Miami -Dude County Produc t Control Approved". noted herein
<br />RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no
<br />change in the applicable building code negatively affecting the performance of this product-
<br />TERN- HN ATION of this NOA will occur after the expuiratian date or if thete has been a revision or change in the
<br />materials, use. au&ot manufacture of the product or process.1%iisuse of this NOA as an endorsement of any product,
<br />for sales. a(t-e tisine or atn• otherpurposes shall automatic ally terminate this NOA. Failure to complywrth any
<br />section of this NOA shall be c ause for termination and removal of NOA.
<br />AD1T_RT1SF_XELXT: The NOA number preceded by the words 1,hami-Dace County. Florida and followed by the
<br />expiration date maybe displayed in ad-.wusing literature_ If anyportion of the NOAis displayed. then it shall be
<br />done in its entirety.
<br />LNSPECTTO'-4: A copy of this entireNOA shall be provided to the user by the mamdarnirer or its distributors and
<br />shall be available for inspection at thejob site at the request of the Building Official.
<br />This NOA revises .& renews NOA 420-0429,05 and consists of this page 1 and e- encepages E- 1. E-2. E-3. E-4.
<br />E-5 & E-6 as well as approval document mentioned abmv_
<br />The submitted documentation was ret•iew ed by Ishaq L Clrn nda. P.E.
<br />NOA No. 214205 03
<br />CmM
<br />I11 wawEcoupw Y ExpirationDatet April14,2026
<br />'ti� I a!�..i� Approval Date;!1larrh 25, 20.1
<br />Pate I
<br />PGT Industries. Inc.
<br />NOTICE OF ACC'EPTANC'E: EVIDENCE SUB11ITTED
<br />2. Evidence Submitted under previous submittal
<br />A. DRAWINGS
<br />1. Draining No_ NEED-5570.0 Rev B. titled `Vinyl Sliding Glass Door NOA ((LMY sheets
<br />I through 21 of 21. prepared by manufacturer. dated 10-0515 and last rinsed on
<br />04,22 20, signed and sealed by A. Lynn Miller. P.E.
<br />B. TESTS
<br />1. Test reports on: 1) Air Infiltration Test, per FBC. TAS 202-94
<br />2) Uniform Static Air Pressure Test, Loading per FBC. TAS 202-94
<br />3) Water Resistance Test_ per FBC. TAS 202-94
<br />4) Large Missile Impact Test per FBC. TAS 201-94
<br />5) Cyclic Wind Pressure Loadingpex FBC, TAS 203-94
<br />along with marked -up drawings and installation diagram of all PGT Industries. Inc.
<br />representative units listed below and tented to qualify Dowsi1791 and Dowsil 983 silicones,
<br />prepared by Fenestration Testing Laboratory. Inc.. Test Reports No.:
<br />FTL 7897, PGT PW5520 PVC Fixed Window (unit 6 in proposal). dated 09! 03114
<br />FTL-20-2107,1. PGT SGD780 Akiininuamm Sliding Glass Door (unit 7 in proposal) FTL-20-
<br />2107.2, PGT CA740 Alm Outsw ing C asemrment' , indow (unit 8 in proposal) FTL-20-
<br />2107.3. PGT PW, 7620A Aluminum Fixed Window (unit 9 in proposal) and FTL-20-2107.4.
<br />PGT PW7620A Ahmuaum Fixed Window (unit 10 in proposal) dated 0713 t20, all signed
<br />and sealed by Idalmis Ortega. P.E_
<br />C. CALCULATIONS
<br />L Anchor verification calculations and structural analysis, complying with FBC 76
<br />Edition (2020), dated 04,22;20, prepared by manufacturer. signed and sealed by
<br />Anthony Lynn Miller_ P.E_
<br />2_ Glazing complies with ASTME1300-04. -09. -12 and -16.
<br />D. QUALITY ASSVILkNCE
<br />Miami -Dade Department of Regulatory .and Economic Resources (RER).
<br />E. 3LkTERL4.L CERMC'ATIONS
<br />1_ Notice of Acceptance No_ 19-0305.02 issued toKurar•ay America. Inc. for their
<br />"Trosifol& I-Irraclear, Clear, and Color PVB Glass Lnterlayer•s-, expiring on
<br />OTD 24.
<br />2. Notice of Acceptance No.17-0808.02 issued to Ktn•aray- America. Inc. for their
<br />"Sentt�-Gtast (C`tear and White) Qiss Intertavel-s", eerpgiting on 07,04��23.
<br />3. Notice of Acceptance No_ 18-1106.10 issued to Vision Extrusions Limited for their
<br />..Brown Coated (Painted or Laminated) White Rigid PVC Exterior Extrusions
<br />for Windows and Doors". expiring on 09.130:24.
<br />4. Notice of Acceptance No- 18-1106.11 issued to Vision Extrusions Limited for their
<br />series "VE 1000 Tan 202 and %Liter shades (Non -Alike) Rigid CeRular PVC
<br />Exterior Extrusions for Windows and Doors expiring on 1 2,29.21.
<br />! I
<br />t
<br />Ishaq I. Chaads. P.E.
<br />Product Control Unit Supervisor
<br />NOA No. 21-0205,03
<br />Expiration Date: April14,2026
<br />Approval Date: March 25, 2021
<br />E -4
<br />PGT Industries. Inc,
<br />PGT Industries, Inc.
<br />PGT Industries, Inv.
<br />NOTICE OF ACCEPT4NC'E: EVIDENCE SUBMITTED
<br />NOTICE OF ACCEPTANNCE: EVIDENCE SL'B11ITT£D
<br />NOTICE OF AC CEPT A'vCT : EVIDENCE SIBAIITTED
<br />1. Evidence submitted under previous N OA
<br />D. QI , AL rFY ASSI'RkNCE
<br />A. DR_kN%ETGS
<br />B. TESTS (continued)
<br />1.
<br />Miami Dade Department of Regulatory and Economic Resources (RER)_
<br />1. Iv1xwfactur&s die drawings and sections.
<br />5. Test report on 1) Air Infiltration Test. per FBC, TAS 202-94
<br />(.Submitted under :`►O4. o. 11-010'' 04)
<br />2) Uniformm Static Air Pressure Test. per FBC. TAS 202-94
<br />E. ALATERLAL. CERTInC ATIONS
<br />2_ Drawing No. 30-5570.0. titled Vtavl Sliding Glass Door NOA W, sheets 1
<br />3) Water Resistance Test. per FBC, TAS 202-94.
<br />1.
<br />Notice of .Acceptance No.15-0528.14 issued to Vision Extrusion Limited for their
<br />through 21 of 21. prepared by manufachrer, dated 10:05115. with revision A dated
<br />4) Large Missile Impact Test per FBC. TAS 201-94
<br />"White Rigid PVC Exterior Extrusions for Windows and Doors". dated 08fI3r15.
<br />0405,r'17, signed and sealed by A_ Lynn Miller, RE.
<br />5) Cyclic Wind Pressure Loading per FBC. TAS 203-94
<br />expiring on 09;30.19.
<br />6) Forced Entry Test. per FBC. TAS 202-94
<br />2.
<br />Notice of Acceptance No.16-0920.08 issued to Vision Extrusion Limmited far their 17,
<br />TESTS
<br />diagramB.
<br />along with marked -up drawings and installation diagram ofviny'1 sliding glass door. prepared
<br />1000 Tan 202 and lighter Shades (Non -White) Rigid PVC Exterior• Esn'usians for N
<br />1. Test report on 1) Uniform Static Air Pressure Test, per FBC. TAS 202-94
<br />by Fenestration Testing Lab, Inc.- Test Report No. FTL 85 t9, dated 11,106.4 5, signed and
<br />W'iudows and Door.', dated 12r08,16. expiring on 11'29;21.
<br />2) Large Missile Impact Test per FBC_ TAS 201-94
<br />sealed by Idalmis Ortega. P. E_ (Test report revised on 12.104115 and 0 24 I'll16)
<br />3_
<br />Notice of Acceptance No. IS-0528,15 issued to Vision Extrusion Limited for their •-
<br />3) Cyclic Wind Pressure Loading per FBC_ TAS 203-94
<br />6. Test report on 1) Air Infiltration Test, per FBC. TAS 202-94
<br />"Brown Coated (Painted or Laminated) W71ite Rigid P'-C Exterior• Extrusions for t-
<br />along with marked up drawings and installation diagram of vinyl sliding glass door, prepared
<br />2) Uniform Static Air Pressure Test. per FBC. TAS 202-94
<br />Windows and Doors". dated 08,13/15. expiring on 09,30.' 19.
<br />H
<br />by Fenestration Testing Lab. Inc., Test Report No. FTL 8717. dated 12.1074 5, signed and
<br />3} Water Resistance Test. per FBC, TAS 202-94.
<br />4.
<br />Notice of Acceptance No_ 16-0712.02 issued to ENERGI Fenestration Solutions USA,
<br />a
<br />sealed by Idalmis Ortega. P. E. (Test report revised on 021516 and 02,1416)
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />Inc. for their "T.A-N 3040 and Lighter Shades (Non White) Rigid PVC Exterior
<br />2. Test report on 1) Air Infiltration Test, per FBC. TAS 202-94
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 203494
<br />Extrusions for Windows and Doors" dated 09;15�'16_ expiring on 0?�'04r`21.
<br />7
<br />2) Uniform Static Air Pressure Test: per FBC. TAS 202-94
<br />along >� ith markedup drawings and installation diagram of vinyl sliding glass door_ prepared
<br />5.
<br />Notice of Acceptance No.16-0712.04 issuer! to ENERGI Fenestration Solutions USA,
<br />A,
<br />3) Water Resistance Test. per FBC. TAS 202-94_
<br />by Fenestration Testing Lab_ Inc., Test Report No. FTL 8552. dated 12r'0415, signed and
<br />Inc. for their 'Bronze and Lighter Shades of Cap C oated Rigid PZ-C Exterior
<br />4) Large Missile Impact Test per FBC. TAS 201-94
<br />sealed by Idahmmis Ortega, P. E. (Test report revised on 02-4 S 2016)
<br />Extrusions for Windows and Doors" dated 0945,46, expiring on 01,16,20.
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br />7. Test report on 1) Uniform Static Air Pressure Test. per FBC, TAS 202-94
<br />6.
<br />Notice of Acceptance No_ 16-0712,03 issued to ENERGI Fenestration Solutions USA,
<br />6) Forced Entry Test. per FBC_ TAS 202-94
<br />2) Large Missile Impact Test per FBC. TAS 201-94
<br />Inc. for their ''W bite Rigid PVC Exterior Extrusions for Windows and Doom" dated
<br />along withmarkedup drawings and installation diagram of vinyl sliding glass door. prepared
<br />3) Cyclic Rind Pressure Loadin.gper FBC. TAS 203-94
<br />08110,17. expiring on 02,2$118.
<br />by Fenestration Testing; Lab, Inc.- Test Report No. FTL 8546, dated 11 06115, signed and
<br />along with nlaiied-up drawings and installation diagrams of vinyl sliding glass door. prepared
<br />7.
<br />Test reports 1' o(s). 10-W2-792(A), 10-06-NIO527. 535753-09. per ASTME-84.
<br />sealed by Idalmis Ortega, P. E. (Test report ivised on 01, 0446 and 0111, 2016)
<br />by Fenestration Testing Lab. Inc.. Test Report No. FTL 6638 (samples A-1 thru A-22). dated
<br />ASTMD 1929 and ASTI`ID-635. issued by EXOVA to V ision Extrusion for cellulosic
<br />3. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />11,4940. signed and sealed by Jorge A_ Causo, P. E. (Subndned under.N'0.4 '1o.11-
<br />composite material
<br />2) Uniform Static Air Prune Test, per FBC. TAS 202-94
<br />010" 04)
<br />(Submitted under ,VO.4 A-& 11-01071 041
<br />3) Water Resistance Test. per FBC, TAS 202-94
<br />8 Test report on 1) Air Infiltration Test, per FBC- TAS 202-94
<br />S.
<br />Notice of Acceptance No_ 14-0916.11 issued to Rurmv America.. Inc_ for their
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />2) Uniform Static Air Pressure Test, per FBC. TAS 202-94
<br />" Sen rr%-Glas,g' (Clear and Ulike) Intertay-er", expiring on OT'04.'1 S.
<br />5) Cyclic Wind Pressure Loading per FBC. TAS 203-.94
<br />3) Water Resistance Test. per FBC, TAS 202-94_
<br />9.
<br />Notice of Acceptance No_16-1117.01 issued to Kura. America. Inc. for their
<br />C) Forced Entry Test, per FBC, TAS 202-94
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />Trosifolg I7t )clear, Clear and Color PVB Interlayer's-'. expiring on 07,08t19.
<br />along with marked -up drawings and installation diagrams ofvinyl sliding glass door. prepared
<br />5) Cyclic Wind Pressure Loadingper FBC, TAS 203-94
<br />by Fenestration Testing. Lab. Inc., Test Report No. FTL 8547. dated 12r04145. signed and
<br />6) Forced Entry Test. per FBC, TAS 202-94
<br />F. STATE' -►CENTS
<br />sealed by Idalnus Ortega, P_ E. (Test report revised on 0115,16)
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door, prepared
<br />l .
<br />Statement letter of conformmmance with FBC -S1h Edition (2014) and FBC-6t' Edition
<br />4. Test report on 1) Air Infiltration Test. per FBC'_ TAS 20244
<br />by Fenestration Testing Lab- Inc_, Test Report No. FTL 6337 (samples A-1 thin A-5), dated
<br />(2017). issued by manufacturer. dated 0&1447. signed & sealed by Lynn Miller. P.E_
<br />2) Uniform Static Air• Pressure Test, per FBC. TAS 202-94
<br />12;06.'10. signed and sealed by Jorge A_ Causo. P. E_ (.Submitted under ?1-0.4 .Vo.11-
<br />2.
<br />Statement letter of no financial interest, dated 041817. issued by manufacturer_ signed
<br />3) Water Resistance Test, per FBC. TAS 202-94
<br />010':09)
<br />ik sealed by Lynn Miller- PE.
<br />4) Large Missile Imct Test per FBC. TAS 201-94
<br />3.
<br />Letter of lab compliance. part of the above test reports.
<br />5) Cyclic 'R, ind Pressure Loading per FBC, TAS 203-94
<br />C. Ca1LCT'I.ATIONS
<br />4.
<br />RER Test Proposal No. 17-0387. dated 05;05,17. signed by Ishaq Chanda. P.E_
<br />G}Forced Euti Y Test, per FBC. TAS 20'-91
<br />I- Anchor verification calculations and structural analysis, complying with FBC-2014,
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door. prepared
<br />prepared by PGT. dated 12;09,15and last revised on 0'? 15'16- signed and sealed by
<br />G. OTHER
<br />by Fenestration Testing Lab, Inc.. Test Report No. FTL 8548. dated 12,'04;15, signed and
<br />Anthony L. Miller, P.E. (Sttbfuitted tinder.'"O_T .'s'o. 15-1_s10.01).
<br />1.
<br />Notice of Acceptance No,15-1210.01. issued to PGT Industries, for their Series
<br />sealed by Idalnmis Ortega P E. (lest report revised on01;0416 and 0? 11 I b).
<br />? Glazing complies with AST1 E-1300-09_
<br />St* t0!27?0" -ilry l Sliding Glass Door (Reinforced) - L.3i3,". expiring onO F 14r`?1
<br />lchaq I. C'handa, P.E.
<br />Ishaq I. Chnnda. F.E.
<br />} Ishaq L C'handa, PIE.
<br />Product Control Unit 5uperz-isor
<br />Product Control Unit Supervisor
<br />Product Control Unit Supervisor
<br />NOANO. 21 20E.03
<br />ItiOa Na.:1-i1.r1`:[t3
<br />+
<br />NOA No. 1-,0205.03
<br />Expiration Date- April 14. 20:6
<br />Expiration Date: April 14, 2026
<br />Expiration Date: April l4, 20.6
<br />Approval Date- XL%rch 25, 1011
<br />Approval Date: March .a. 2011
<br />Approval Date: '_liarch .5, 2021
<br />E -1
<br />E 2
<br />E _3
<br />CGI Windows and Doors, Inc.
<br />N OTIC E OF ACCTPT A'YC•E: EVIDENCE SUB'1fITTED
<br />E. 2~LXTERLAL, CERTIFICATIONS (continue)
<br />5. Quanex Part Suter Suacer Standard complying with ASn-1 C5IS Thenual Conductivity
<br />0.891 BTU -in+' hr.-#1=-°F, ASTM F 1249 IXIITR-Pass. ASTM D3985 Oxygen -Pass_ ASTNI E
<br />2190 I.G . Durability -No Fog -Pass. (Subm hied under prmlons A'0.4 Yo.15-040'9. 05)
<br />6, Quanex Part Dur•aseal complying with ASTM C518 Themaai Conducthrity 2.22 BTU -in'
<br />hr.-ft-'-'F, ASTM F 1249 I iIVIR-Pass. ASTM D 1434 Argon Pexnreance-Pass. ASThi E
<br />2189 I.G. Durability -No Fog. AST11 E 546 Dew Point Development -20OF in 48 his.
<br />(SubPNltWd uuderAbA o. 15 0109,O.S).
<br />7_ Vision Extrusions_ Ltd Parts complying with PVC-AAINIA 303-13. Voluntary Specification
<br />for Rigid Polyvinyl Chloride (PVC) Exterior Profiles for Vision Extnssions, Ltd. VEX-1 by
<br />AMMA Fenestration Exterior Profile Certification Program (.Submitted under N0.4 Aa IS-
<br />0409. 05)
<br />& Vision Extrusions_ Ltd. Parts conVNing with PVC A.MsIA 303-13..
<br />(Subm ilfed nuder AO-i N'o. 15-0109. 05)
<br />9_ PVC _AAMA 303-13, Voluntary Specification for Rigid Polyvinyl Chloride (PVC) Exterior
<br />Profiles for Vision Extrusions. Ltd.-VEX-1 by AAMA Fenestration Exterior Profile
<br />Certification Program
<br />10. Notice of Acceptance No_ 18-1217.14 issued to Energi Fenestration Solution, USA, Inc. for
<br />their `-Tau 3040 & light shade (non -white) W7rite Rigid PVC Exterior Extrusions for
<br />Windows and Doors". expiring on 02 /04. 21.
<br />11. Notice of Acceptance No_ 18-0122.02 issued to Energi Fenestration Solution USA. Inc, for
<br />their series '`White Rigid PVC Exterior Estr•usions for Windows and Door-.Sespmng on
<br />02:28 .'23 _
<br />12. Notice of Acceptance No- 20-0203.03 issued to Esiergi Fenestration Solution, USA. Inc. for
<br />their Bronze & light shade cap coated White Rigid PVC Exterior Extrusions for
<br />Windows and Doors expiring on 04i16,25.
<br />F. STATEAKNTS
<br />1. Statement letter of conformance to FBC 7" Edition (2020), dated 04:"'21;20. issued by
<br />manufacturer. signed and sealed by Anthony Lynn ;Miller, P.E.
<br />2. Statement letter of no financial interest and of independent. issued by manufacturer. dated
<br />0448 20, signed and sealed by Anthony Lynn Miller. P.E.
<br />3, Private Labeling Agreement document between PGT. dated 03:30,45 and signed by all
<br />involved parties.
<br />G. OTHERS
<br />1_ This NOA revises N OA# 17-0420.06 (PVTw'CGI) and updates to FBC2020 (7,'Edition)_
<br />expiring 042,1 r 21-
<br />1 RER Test proposals 49-1155 dated 01,40.210 approved by IshagI_ Chanda_ P.E. expiring
<br />04.•14:21.
<br />. J.
<br />Ishaq L Chanda, P.E.
<br />Product Control Unit Supenisor
<br />NOA No. 21-0205.03
<br />Expiration Date: April 14.2026
<br />Approval Da te: Iliarch 25, 2021
<br />E -5
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANCE: EN7 DEtiCE SUBMITTED
<br />3. New Evidence Submitted
<br />A. DRAWINGS
<br />1. Drawing No. AID-5570,0 Rev B. titled 'Vinyl Sliding Glass Door NOA (LNV', sheets I
<br />through '21 of 21. prepared by nmufactuner. dated 10105.15 and last revised on 02;101;21_
<br />signed and sealed by A. Lynn Miller, P.E.
<br />Note. This revision consists replacement of same existing installation screw with flat head_
<br />B. TESTS
<br />1. None.
<br />C. CALCULATIONS
<br />1. None_
<br />D. QUALITY ASSUR_k C'E
<br />1. Miami -Dade Department of Regulatory and Economic Resources (RER).
<br />E. 1LATERIAL C ERTIFICATIONS
<br />1_ Notice of Acceptance No_ 19-0305.02 issued to Kararay America, Inc, for their
<br />"Trosifoll Ultr•aclear, Clear, and Color PVB GLass Interlarers-, expiring on 07,08 "24_
<br />2. Notice of Acceptance No- 17-0808.02 issued to Kur•aray America, Inc. for their
<br />"Sentn-GlaTI (Clear and White) Glass Interlay-er•s"'. expiring on 07,'04;'23_
<br />3. Notice of Acceptance No.18-1106.10 issued to Vision Extrusions Limited for their "Brown
<br />Coated (Painted or Laminated) White Rigid PVC Exterior- Extrusions for Windows
<br />and Doors". expiring on 09,30.24.
<br />-!_ Notice of Acceptance No_ 18-1106.11 issued to Vision Extrusions Limited for their series
<br />"VE 1000 Tan 202 and lighter shades (Non-117rite) Rigid Cellular PVC Exterior
<br />Extrusions for W urdow s And Door's", expiring on 12. 19 21.
<br />F. STATE'_4IEN TS
<br />1. Statement letter of conformance to FBC 7' Edition (2020), dated 02-0121. issued by
<br />manufacturer. signed and sealed by Anthony Lynn Miller. RE.
<br />2. Private Labeling Agreement dated 03:08,21 between PGT Industries. Inc. and CGI
<br />Windoi s and Door Inc_. signed by Dean M. Ruark, P.E., V.P. Engineering. on behalf of
<br />both co mpanies_
<br />G. OTHERS
<br />1_ This NOA revises & renews NOA# 20-0429.05 (PLA wl,CGI), expiring 04i14,126_
<br />2. The current associated. PLA CGI file #21-0205.0L expiring 04114; 26.
<br />E -6
<br />Ishaq 1. C•hands. P.E.
<br />Product Control Unit Supervisor
<br />NOA No, 21-0205.03
<br />Expiration Dale: April 14.2426
<br />Approval Date, March 25, 2021
<br />^W'
<br />W
<br />Cn
<br />N
<br />O
<br />W
<br />�
<br />U
<br />'=3
<br />a)
<br />CU
<br />C:L
<br />C)
<br />c
<br />.�
<br />CU
<br />.6--1
<br />n-
<br />to
<br />=
<br />0
<br />CU
<br />=
<br />0
<br />E.O
<br />a)
<br />�
<br />CU
<br />=
<br />U_
<br />CU
<br />.cn
<br />Cn
<br />_0O
<br />Q
<br />N
<br />0
<br />C
<br />C17
<br />Q
<br />Q
<br />r�
<br />W
<br />J
<br />C/)
<br />L
<br />z
<br />-r--�
<br />W
<br />Ca
<br />O
<br />IL
<br />Q
<br />0
<br />SHEET NO.
<br />PA 1.4
<br />July 17, 2023
<br />
|