|
MIAMMQAI]E 39A311-DADS COUNTY
<br />+� PRODIiCTCO-NUOL SECTION
<br />1 Psft3 SW 26 saeK Room 308
<br />DEPART33ENT OF RECMLATORT ANTI ECONCARC RESOURCES (RER) Minn. Florid. 33173-2474
<br />BOARD AND CODE A03d MSTR ATIONDIVISION T (786) 315-2M F (7W 315-250
<br />NOTICE OF ACCEPTANCE (NOA)
<br />PGTlndastries, Inc.
<br />1070 Technology Drive,
<br />'_north Venice, FL 34275
<br />SCOPE:
<br />This NOA is being issued under the applicable rules and regulations governing the use of cotstnrctiontuaterials. The
<br />documentation submitted has been reviewed and accepted by Miami -Dade County RER -Product Control Section to
<br />be used m Kum Dade Q1mty and o6er area swhere allctw-eil bythe Authority Haug Jusisdiiictica (AHI).
<br />This NOA shall not be valid after the expration date statedbelow. The Miami: Dade County Product Control Seeim
<br />(In Miami Dade County) andtorthe AHJ (in areas odier than Miami Dade County) reserve the right to have this
<br />product or material tested for quality assuranceputposes. if this product or nuierial fails to petform.in the accepted
<br />manner, the marmiacturer will incur the expense of such testing and the AH7may immediatelyrevoke, mo dify. o r
<br />suspend the use of such product or material within their jurisdiction. RER reserves: the right to revoke this
<br />acceptance, if it is determined byMiami-Dade County Product Control Section that this product or material fails to
<br />meet fire reqummeats of the applicable building code_
<br />This product is approved as described herein and has been designed to comply with the Florida Budding Code_
<br />incku ing the I ig h Velocity Hurricane .Zone.
<br />DESCRIPTION: Series "5570J2 770" Vinyl Sig Glass Door (Reinforced) w/ o 900 & 13- 0 corners-L-MI.
<br />APPROi .0 DOC%.ai N"r. Drawing No. MD-g;70.0 Res- B, titled " %7inyl Sliding Glass Door NOA (LA", sheet
<br />I through 21 of21, prepared bymanibmurr, dated 10/05,°15 and last revised on 02/011-71, signed and sealed by
<br />A. Lynn Miller, P.E., bearing the Miami -Dade County -Product Control Revision stamp with the Notice of
<br />Acceptance nua$ser and expiration date by the Miami -Dade Court Product Control Section
<br />MISSME LtIrtPACT RATLNG: Large and Small Nksile impact Resistant
<br />Limitations:
<br />1. See table 1 (sheet 7) and table 2 (sheet 1) for applicable SGD unit sinm design pressures, reinforcements types.
<br />glass types, sill riser (see tables B-1 & B-2. sheets 7-8) and anchor layout sweets requirements in 11 thou 16.
<br />2. Rigid White PVC, Tan (Non -white) Rigid PVC andBrovms coated (Painted or laminated) white Rigid PVC to be
<br />labeled per refbnencedNOA'srequiremeats.
<br />3. Egress operable doors must comply with min clear width or height per FBC requirement as applicable.
<br />4. Pocket walls under separate approval. to be reviewed by Building official
<br />LABELING: Each unit shall bear a pemranert label with the nu►tmiacturees name or logo. city. state and series aid
<br />following statenww: 'Mami Dade County Product Contral Approved", noted herein.
<br />RKNEW AL of this NOA shall be considered after a rewmil application has been filed and there has bee nuo
<br />change in the applicable building codenegatively affecting the petfoxmance ofthis product_
<br />TERMINATION of this NOA well occur after the expiration date or if theme has been a revision or change in the
<br />materials, use, an&or mamdwture of the product or process. Misuse of this NOA as an endon ement of any product,
<br />for sales. advertising or any odwrputposes shall automakc ally terannate this NOA. Failure to comply with any
<br />section of this NOA shall be cause for termination andremo-, al ofNQA.
<br />ADVERTLSEME-N-T: The NOA number precededby the words Miami Dade County: Florida, and followed by the
<br />expiration date maybe displayed in adimrksmg literature. If anypottion of the NOAis displayed. then it shall be
<br />done in its entirety.
<br />LNSPECTION: A copyof this entire NOA shall beprovided to the user by dre manvfactureror its distributors and
<br />shall be available for inspection at the job site at the request of the Building Official.
<br />This NOA revises & renevm NOA 920-0419.05 and consists of thispage 1 and evidewepages E-1. E-2, E-3, E-4.
<br />E-5 & E-6 as well as approval document mentioned abonv_
<br />The sub uitted documentation was reviewed by Idwil L Cbands, PE.
<br />N'OA April
<br />14, 026
<br />M11M i Expiration Datec April ld, 2016
<br />Approval Date.Marck 15, 20:1
<br />Page I
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBMtiTED
<br />2. Evidence Submitted under previous submittal
<br />A. DRAWINGS
<br />1. Drawing No. MD-5570.0 RerB. titled "Vinyl Sliding Glass Door NOA W'. sheets
<br />1 through 21 of 21, prepared by manufacturer dated I O.105+15 and last revised on
<br />04,22,20, signed and sealed by A- Lynn Miller, P.E.
<br />B. TESTS
<br />1. Test reports ow 1) Air Infiltration Test, per FBC. TAS 202-94
<br />2) Uniform Static Air Pressure Test. Loading per FBC. TAS 202-94
<br />3) Water Resistance Test. per FBC. TAS 202-94
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br />along with marked -up drawings and installation diagram of all PGT Industries, Inc.
<br />repneseatative unfits listed below and tested to qualify Dowsil 791 and Dowsil 983 silicones.
<br />prepared by Fenestration Testing Laboratory, Inc_. Test Reports No.:
<br />FTL-7897, PGT PW5520 PVC Fixed Window (mlil 6 in proposal), dated 09/03/14
<br />FTL-20-2107.1, PGT SGD780 Aluminum Sliding Glass Door (unit 7 in proposal) FTL-20-
<br />2107.2, PGT CA740 Ali= Outswing Casement window (unit 8 in proposal) FTL-20-
<br />2107.3, PGT PW7620A Aluminum Fixed Window (unit 9 in proposal) and FTL-20-2107.4.
<br />PGT PW7620A Alun nnum. Fixed Window (unit 10 in proposal) dated 07113f20, all signed
<br />and sealed by Idalmis Ortega. P.E.
<br />C. CALCULATIONS
<br />1. Anchor verification calculationis and structural analysis, complying with FBC 71
<br />Edition (2020). dated 04/22,120, prepared by mamrfachm- signer and sealed by
<br />AnthonyLy=10er, RE_
<br />2. Glazing complies with ASTM E 1300-04, -09" -12 and -16.
<br />D. Qi? ALMI ' ASStMANCE
<br />Miann-Dade Depanmeat of Regulatory mid Economic Resources (RER).
<br />E. MATERIAL CERTInCATIONS
<br />1. Notice of Acceptance No. 19-OW- .02 issued to Kuraray America, Inc. for tb cir
<br />"Trosifol3V Ultrackar, Clear, and Color PVB Glass Interlavers"_ expiring on
<br />07,'08r?4_
<br />2. Notice of Acceptance No.17-0805.02 issued to Kuraray America, Inc. for their
<br />"S@nftTGhs (Clear and White) Glass Interlavevs ', expiring on 07104) 3.
<br />3. Notice of Acceptance No. 18-1106.10 issued to Vision Extrusions Limited for their
<br />"Brown Coated (Painted or Laminated) White Rigid PVC Exterior Extrusions
<br />for Windows and Doors", expiring on 09i3024.
<br />4. Notice of Acceptance No.19-1106.11 issued to Vision Extrusions Limited for their
<br />series "VE 1000 Tan 202 and lighter shades ('.pion -White) Rigid Cellular PVC
<br />Exterior Extrusions for Windows and Doors". expiring on 12 —9,r21. ,.
<br />x
<br />lahsq L Chards, P.E.
<br />Product Control Unit Supervi.or
<br />NOA No. :1-0205.03
<br />Expiration Data: -April 14, 2026
<br />Approval Date: Burch Ut, 2021
<br />E -4
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANCE,- EAZDENCE SUBMMTED
<br />1. Evidence submitted under previous .XOA
<br />A. DRA'%TM1 GS
<br />1 _ Manufactunes die drawings and sections.
<br />(Srlbmilted render ?VOA ?1 o. 11-0107. 04)
<br />2_ Drawing No. MD-5570.0, titled "Vinnyl Sliding Glass Door NOA {LM)", sheets 1
<br />through 21 of 21, prepared by manufacturer, dated l&05115, with revision A dated
<br />OV0537, signed and sealed by A. Lynn Miller, P.E.
<br />B. TESTS
<br />I _ Test report on 1) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />2) Large Missile Impact Test per FBC, TAS 201-94
<br />3) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br />along with matloed-up drawings and installation diagram of vinyl shoring glass door, prepared
<br />by Fenestration Testing Lab, Inc.. Test Report No. FTL $717, dated 1107115. signed and
<br />sealed by Idahnis Ortega, P. E. (Test report revised on 02115/16 and 02.24116)
<br />Test report on 1) Air Infiltration Test, per FBC. TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance Test, per FBC. TAS 202-94_
<br />4) Large Missile Impart Test per FBC. TAS 201-94
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along with marlmdup drawings and installation diagram ofv riyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FTL 8546, dated I I M6115, signed and
<br />sealed by Idalmis Ortega, P_ E. (Test report revised on 01e0436 and 0211112016)
<br />3. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along with marked -imp drawmigs andinstallatiou diagram ofvinyl shding glass door prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FTL SM7, dated 12WI5, signed and
<br />sealed by Idatmis Ortega, P. E. (Test report mised on 02/1546)
<br />4. Test rep ni on 1) AirInfiltration Test. per FBC, TAS 2(Y2-94
<br />2) Uniform Static Air Pressure Test, per FBC_ TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94
<br />4) Lange Nmle ImW Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along with matked-up drawings and installation diagram of vinyl sliding glass door: prepared
<br />by Fenestration Testing Lab. Inc., Test Report No. FTL 8548_ dated 12104,45, signed and
<br />sealed by Idalmis Ortega, P. E. (Test report revised on 01iW16 and 02/1.1116).
<br />•r
<br />lAa q L Chanala, P.E.
<br />Product Control L-:ait supervisor
<br />NflA No. 21-020.9.03
<br />Expiration Dal: April 14, 2026
<br />Approval Date: Alareh 25, 2021
<br />E -1
<br />CGI Windows and Doors, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
<br />E. MATERIAL CERTIFICATIONS (continue)
<br />5. Quanm Part Super Spacer „Standard complying with ASTM C518 Thermal Conductivity
<br />0.881 BTU-W hr.-ft -°F, ASTM F 1249 U11.r'TA Pass, ASTM D3985 Oxygen -Pam AS71M E
<br />2190 I.G_ Durability -No Fog Pass. (Ssbmitled under preolous -NIOA ?1'o.1."409.05)
<br />6. Quaueam Part Dursseal complying with ASTM C518 Thermal Conductivity 2.22 BTU -in'
<br />hr: ft =°F. ASTM F 1249 WVTR Pass, ASTM D 1434 Argon P oe-Pass, ASIM E
<br />2189 I.G. Durability No Fog, ASTM E 546 Dew Point Developnient 20eF in 48 hrs.
<br />(Subnr &kd under AWA Xo. I5-0409.05).
<br />7, Vision Extrusions, Ltd_ Parts com plyiing with PVC-AAMA 303-13, Voluntary Specification
<br />for Rigid Polyvinyl Chloride (PVC) Exterior Profiles for Vision Extrusions, Ltd.-VEX-1 by
<br />AAMA Fenestration Exterior Profile Certification Pwgrara. (Submwed under NOA X6.15-
<br />0409.05)
<br />8. Vision Extrusions, Ltd. Parts complying with PVC-AAMA 30343_
<br />('Subm fit`ed tinder NO 4 No. 15-0-469 05)
<br />9_ PVC-AAMA 303-13, Voluntary Specification for Rigid Polyvinyl Chknide (PVC) Exterior
<br />Profiles for Vision Extrusions, Ltd.VEX-1 by AAMA Fenestration Exterior Profile
<br />Certif t_ation Program
<br />10_ Notice of Acceptance No. 18-1217.14 issued to Energi Fenestration Solution, USA, Inc. for
<br />their `Tan 3040 & light shade (non -white) White Rigid PVC Exterior Extrusions for
<br />Windows and Doors", expiring on 02,04/21.
<br />11_ Notice of Acceptance No. 18-0122.02 issued to Energi Fenestration Solution., USA, Inc. for
<br />their series -Vi ite Rigid PVC Exterior Extrusions for Windows and Doors''. cq)rang on
<br />02,'-?8/21
<br />1.2. Noticeof Acceptance No_ 20-0203.03 issued to Energi Fenestration Solution, USA, Inc. for
<br />their "Bronze & light shade cap coated Ultite, Rigid PVC Exterior Extrusions for
<br />Windows and Doors"', expiring on 04/16.25_
<br />F. STATEMENTS
<br />1. Statement letter of conformance to FBC 71b Edition (2020), dates! 0411120. issued by
<br />manufacturer, signed and sealed by Anthony Lyra Miller. P.E.
<br />2. Statement letter of no financial interest and of independent. issued by manufacturer, dated
<br />04/18.20, signed and sealed by Anthony Lynn Milkr, P.E.
<br />3. Private Labeling. Agreement document between PGT, dated 0330115 and signed by all
<br />involved pasties
<br />G. OTHERS
<br />1. This NOA revises N OA.# 17-0420.06 (PVT w/C:GI) and updates to FBC2020 ('7* Edition),
<br />expiring 04021;21 _
<br />2. RER Test proposals #19-1155 dated 01/10120 approved by Ishaq I_ C'haada, P:E, expiring
<br />04114,21 _
<br />E -S
<br />ishnq L Chaads, P.E.
<br />Product Contra] Unit Supervisor
<br />NOA NO. 21-020$:03
<br />Expiration Date: April l4,20.'6
<br />Approval Da to r March 1-4, 2021
<br />PGT Industries,1w.
<br />NOTICE OF AC:CEPTAINCE: EN'IDETCE SUBMITTED
<br />B. TESTS (continued)
<br />5. Test report on 1) Air Infiltration Test, per FBC. TAS 202-94
<br />2) Umfrnm Static Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance Test, per FBC. TAS 202-94.
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br />6) Foxed Entry Test, per FBC, TAS 202-94
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FTL 8549, dated 11,V6J15, signed and
<br />sealed by Idalmis Ortega, P. E_ (Test repent revised on 12104115 and 024 L(16)
<br />6. Test report on. 1) Air Infift ation Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC. TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94.
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br />along vnthmarkedup drawings and installation diagrams of vinyl sliding ,glass door- prepared
<br />by Fenestration Testing Lab, Inc.. Test Report No. FTL 8552, dated I IN115, signed and
<br />sealed by Idalnmis Ortega, P. E. (Test report revised on 024 2016)
<br />7. Test report on 1) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />2) Large Missile Immpact Test per FBC, TAS 201-94
<br />3) Cyclic Wind Pressure Loading per FBC. TAS 203-94
<br />along with marked up drawingsand installation diagram of vinyl sliding glass door, pawed
<br />by Fenestration Testing Lab. Inc., Test Report No. FTL 6638 (samples A-1 thru A-22), dated
<br />11 /19110, signed and sealed by Jorge A. Canso. P. E. fSubmNed rmderl'NO-4 Alo.11-
<br />0107. 04)
<br />8 Test report on 1) Air Infiltration Test, per FBC. TAS 242-94
<br />2) Uniform Static Air Pressure Test, per FBC. TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94.
<br />4) Large Missile InVact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Preswe Loading per FBC, TAS 203-94
<br />6) Forced Entry Test, per FBC. TAS 20244
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No-FTL 6337 (samples A-1 thrtl A-5), dated
<br />12106?10, signed and sealed by Jorge A. Catlso, P. E. (Submitted under XO.4 h'o.11-
<br />010? 09)
<br />C. CALCULATIONS
<br />t _ Anchor verification calculations and structural analysis, complying with FBC-2014,
<br />prepared. by PGT, dated 12,109115and last rct„rised on 01-115116, signed and sealed by
<br />Anthony Miller, P.E. (SubsibTed under,'4O.4 Ne.151210.01).
<br />2. Glazing cooties with ASTME-1300-09.
<br />1
<br />Ishaq L Chands, P.E.
<br />Product Control Unit Supervisor
<br />NOA No. 21-0205.43
<br />Expiration Date: April 14, 2026
<br />Approvsl Date: Xfireh :6, 2021
<br />E -2
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
<br />3. New Evidence Submitted
<br />A. DRAWTNGS
<br />1. Drawing No. MID-5570.0 Rev B, titled "Vinyl Sliding Glass Door NOA (LM)", sheets I
<br />through.? 1 of 21, prepared by manufacturer, dated 10,'05115 and last revised on 02r0112 L
<br />signed and sealed by A_ Lynn Millet, P.E.
<br />Note: This revision consists replacement of same existing installation screw with flat head_
<br />B. TESTS
<br />1. None.
<br />C. CALCULATIONS
<br />1_ None.
<br />D. QUALITY- ASSUIL4,.NCE
<br />1. -Dade Department of Regulatory and Economic Resources (RER).
<br />E. MATERLAL CERTIFICATIONS
<br />I_ Notice. of Acceptance No.19-0305.02 issued toKararay America, Inc. for their
<br />"Trosifai%- Untr•aclear, Clear, and Color P`'B Glass Interlayers-, expiring on 07V& 24_
<br />2. Notice of Acceptance No.17-0808.02 issued to Kuraray America, Inc. for their
<br />"SeutryGlast (Clear and A ite) Glass lnted1averss', expiring on 07104123.
<br />3. Notice of Acceptance No.18-1106.10 issued to Vision Extrusions Limited for their `Brown
<br />Coated (Painted or Laminated) M'hite Rigid PVC Exterior Extrusions for '1'1'indows
<br />and Doors", expiring on 09130124.
<br />4. Notice ofAcceptanm No.18-1106.11 issued to Vision Extrusions Limited for the series
<br />"VE 1000 Tan 202 and lighter shades (bran-M hike) Rigid Cellular P17C Exterior
<br />Extrusions for Windows and Doors", exiting on 122912 L
<br />F. STATEMENTS
<br />1_ Statement letter of conformance to FBC 7i0 Edition (2020), dated 02101,21, issued by
<br />manufacturer, signed and sealed by Anthony Lynn Miller. RE.
<br />2. Private Labeling Agreement dated 0110&+21 between PGT Industries, Inc. and CGI
<br />Windows and Dooms Inc., signed by Dean M. Ruadc, P.E., V.P. Engineering. on behalf of
<br />bothcoies_
<br />G. OTHERS
<br />1_ This NOA m ises & renews NOA# 20-0429.05 (PLA wlCGI), expiring WlV26.
<br />2. Tine current associated PL.4 CGI file #21-0205.01, expiring 04/14,26.
<br />E -6
<br />I �t.7 f . L/ 4'tn_'L
<br />lshaq L Chanda. P.E.
<br />Product Control Unit Supervisor
<br />NOA No. 21-0205.03
<br />Expiratioa Dads: April14,2026
<br />Approval Date: M arel< 29, 202I
<br />PGT Industries, Inc.
<br />NOTICE OF: �iCCEPTAINCE: EVIDENCE SUBMITTED
<br />D. QUALITY ASSUK4,NCE
<br />1. Miami Dade Department of Regulatory and Economic Resourcces (RER)_
<br />E. MATERIAL CERTIFICATIONS
<br />1 _ Notice of Acceptance No.15-0528.14 isstaed to Vision Extrusion Limited for their
<br />`lite Rigid PVC Exterior Extrusions for Windows and Doors". dated 08/ 13i15.
<br />expiring on. 0930119.
<br />2. Notice of Acceptance No.16- 4920.08 issued to Vision Extra limited for their *YE
<br />1000 Tan 202 and lighter Shades (N4on-White) Rigid PVC Exterior Extrusions for
<br />Tirindows and Doors", dated 120116. expiring on. 12129.21_
<br />3_ Notice of Acceptance No.15-0528.15 issued to Vision Extrusion Limited for their
<br />"Brown Coated (Painted or Laminated) i1'frite Rigid PVC Exterior Extrusions for
<br />W-mdows and Doors". dated 0&'13115. expiring on 0930,0.
<br />4_ Notice of Acceptance No_ 16-0712.02 issued to ENERGI Fenestration Solutions USA,
<br />Inc. for their "TAN 3040 and Lighter Shades (Non-R'hite) Rigid PA'C Exterior
<br />Extrusions for W, indows and Doors" dated 0935116, expiring on 02104121.
<br />5. Notice of Acceptance No.16-0712.04 issued to ENERGI Fenestration Solutions USA,
<br />Inc, for their "Bronze and Lighter Shades of Cap Coated Rigid PVC Exterior
<br />Extrusions for Windows and Do(ws" dated 0935116, expiring on 04/16/20.
<br />6. Notice of Acceptance No_ 1"712.03 issued to ENERGI Fenestration Solutions USA,
<br />Inc. for their ` N% lmite Rigid PVC Exterior Extrusions for Windows and Doors" dated
<br />09/10117. expiring on 02)2&18.
<br />7_ Test reports No(s). 10-002492(A), 10406-MO527, 535753-09. per ASTME-84.
<br />ASTN D 1929 and ASTMD-63 5. issued by EXOVA to V ision Extrusion for cellulosic
<br />composite amaterial.
<br />(Submitted render AAA Vo.11-0107 04)
<br />8_ Notice of Acceptance No. 14-0916. 11 issued. to Kuraray America., Inc. for their
<br />"Sean,%Glas+B (Clear and White) Int+erlati-ee. expiring on 07,04118.
<br />9. Notice of Acceptance No.16-1117.01 issued to Kuraray America, Inc_ for their
<br />-.Trosifolt Ulmackar, Clear and Color PUB Interlarer"% expiring on 07039.
<br />F. STATEMENTS
<br />1. Statetimermt letter ofconformance with FBC-5* Edition (2014) and FBC-60Edition
<br />(2017� issued by manufacturer, dated 0&114117, signed & sealed by Lynn Miller, P..E_
<br />2_ Statement letter of no financial interest. dated 04/18/17. issued by manufacturer, signed
<br />& senled by Lynn Miller P.E_
<br />3. Letter of lab compliance, part of the above test reports.
<br />4. RER Test Proposal No.17-0387. dated 09D5117, signed by Ishaq Chanda. P.E.
<br />G. OTHER
<br />1. Notice of Acceptance No.15-1210.01, issued to PGT Industries, for their Series
<br />"557012770" N,'inyl Sliding Glass. Door (Reinforced) - L.M.L", expiring on 04'14'-21
<br />E -3
<br />Ishaq L Chands, P.E.
<br />Product Control Unit Saperviser
<br />NOA No. 21-0205.03
<br />Expiration Date: April 14, 2026
<br />Approval Date: March 25, 2021
<br />N
<br />Cn
<br />—Cu
<br />O
<br />t`
<br />a
<br />Q
<br />�
<br />O
<br />0
<br />C
<br />.�
<br />CU
<br />U
<br />-p
<br />—
<br />Cn
<br />.O
<br />ja
<br />CO
<br />C
<br />O
<br />21
<br />O
<br />U_
<br />. �
<br />-0
<br />Cn
<br />E
<br />O
<br />Q
<br />CU
<br />Q
<br />W
<br />J
<br />017
<br />0
<br />N
<br />c
<br />4
<br />era
<br />e�
<br />0
<br />,a �= M
<br />Q
<br />C W W "
<br />0o
<br />,o sic
<br />A O
<br />Q .d+NY
<br />a,
<br />er ; cc
<br />.°' 41, m
<br />d G C
<br />rj C .2 9+
<br />N Q.�
<br />C
<br />IO O
<br />fa
<br />4D
<br />0
<br />Cn
<br />(D
<br />E
<br />N
<br />z
<br />CU
<br />O
<br />t`
<br />O
<br />CL
<br /><
<br />U
<br />O
<br />L
<br />�J
<br />U
<br />co
<br />M
<br /><
<br />O
<br />L
<br />�
<br />w
<br />2 i
<br />Z �
<br />Z
<br />Q
<br />J
<br />a
<br />SHEET NO.
<br />PA 1.4
<br />August 10,
<br />
|