|
M1AMht" DE AUAW--DARECOi7NTY
<br />PRODUCTCONTROL SECTION
<br />11905 SR' 26 Su* Room 203
<br />DEPARTUMOF REGULATORY ANDECONiOMIC RESOURCES OM) Mimn, Florida 33175-2474
<br />BOARD AND CODE ADMMUSTRATION DIMI DN T (J86) 3 i5-2WO F (M) 315-25ff
<br />-NOTICE OF ACCEPT_k C.'E (NOA) �wim"460"Worow=f
<br />PGT Industries, Inc.
<br />1070 Technology Drive,
<br />North Venice, FL 34275
<br />SCOPE:
<br />This NOA is being issued under the applicable rules and regulations governing the use of consttvctioamaterials. The
<br />documentation submitted has beenreviewed and accepted by Miami -Dade CountyRER -Product Control Section to
<br />be used in MraumiDade C•oaaioty and vtluerareas where allowed by the Au lhority Havmg 7uxi tm (AM.
<br />This NOA stroll not be valid after the expo shm date statedbelow. The Miami -Dade County Product Control Section
<br />(In Miami Dade County) and/orthe AH1(in areas other than Miami Dade County) reserve the right to have this
<br />product or material tested for quality a ssurance putposes. If this product or material fails to perform in tte a ecepted
<br />manner, &era-facturer will incur the expense of such testing and the AH7may immediatelyrev oke, mo dify, or
<br />suspend She use of such product or materW within their jurisdiction. RER reserves the right to revoke this
<br />acceptance_ if it is determined by Miami -Dade County Product Control Section that this product or material fails to
<br />meet the requirements of the applicable budding code_
<br />This product is approved as described hesein andhas been, designed to comply with the Florida Building Code,
<br />iachiding the High VelocityHuraiam Zone
<br />DESCRIPTION: Series "5 70/2 770" Vinyl Sliding Glass Door (Reinforced) whro 900 & 135.6 corners-L.-MJ.
<br />APPROVAL DOCU AWNT: Drawing No.'s-Sr70.0 Res-B, titled "'Vinyl Sliding Glass Door NOA (LM)", sheet
<br />1 through 21 of21, prepared by manufacu w, dated 10,105A 5 and last revised on 02/01121, signed and sealed by
<br />A. Lynn Miller, P-E.. hearing the h&m6-Dade CountyPtroduct Control Rmsionstamp with the Notice of
<br />Acceptance nun>ber and expiration date by the Mum -Dade County Product Control Section
<br />MISSILE IMPACT RAMG: Large and Small 11Sssile Impact Resistant
<br />Ltraitations:
<br />1 _ See table 1 (sheet 2) and table 2 (sheet g) for applicable SOD unit sizes., design pressures, rkdcwcements types.
<br />glass types, sill riser (sae tables B-1 & B-2. sheets 7-8) and anchor layout sheet requirements in 11 thru 16.
<br />2. Rigid White PVC, Tan (Non -white) Rigid PVC andBrown coated (Painted or laminated) white Rigid PVC to be
<br />labeled per referencedNOA'srequiremettts.
<br />3. Egress operable doors must comply with min clear width or height per FBC requirement as applicable.
<br />4. Pocket walls under separate approval, to be reviewed by Building official
<br />L ABELL'vG: Each unit shall bear a pesmaneat label with the manufacrurees name or logo. city. state and series and
<br />following statement: "Miami -Dade County Product Control Approved", noted herein.
<br />RENEW ALL of this NOA shall be considered after a renewal application has been filed and there has beenno
<br />change in the applicable budding code negati%vly affecting the perfatmance ofthis product
<br />TERAU1 ATION of this NOA will occur after the expiration date or if there has been a rewsioa or change in the
<br />materials, use, and/or mamdwture of the product or process. Misuse of this NOA as an endorsement of any product,
<br />for sales. advertising or any o4m purposes shall automatic ally termite this NOA. Failure to comply with any
<br />section of this NOA shall be cause for ternination and removal ofNOA.
<br />ADVERTISEIMEXT: The N0Anuni erprecededby the words Mini -Dade Couary.. Florida, and toBowedby the
<br />expiration date maybe displayed in advertising li teenture. If anypartion of the NOA is displayed. then it shall be
<br />done in its entirety.
<br />LN SPECT'ION: A copy of this entire NOA shalt bepro %ided to the user by the manufactuter or its distributors and
<br />shall be available for inspection at the job site at the request of the Building Official.
<br />This NOA revises & renecrs rOA#20-04N.05 and consists of thispage 1 and e-,idewe pages E- 1. E-2, E-3, E-4,
<br />E-5 & E-6 as well as appro-ml document mentioned ab*w-
<br />The submitted documentation was reviewed by Ishaq L Clanada. P.E.
<br />NOA No. 21-0205,03
<br />Expiration Date: April 14, 2026
<br />Approval Datt:Marrk 26,1021
<br />Page 1
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPT-A.NCT : EVIDENCE SUB -NUTTED
<br />2. Evidence Submitted under precious submittal
<br />A. DRAWINGS
<br />1. Drawing No. bD'1-5570.0 Rer B, titled "Vinyl Sliding Glass Door NOA (LM) sheets
<br />1 through 21 of 21, prepared by manufacturer. dated 10,105/15 and last revised on
<br />04/2120. signed and sealed by A. Lyme Miller, P.E.
<br />B. TESTS
<br />1. Test reports on: 1) Air InfrytraticnTest, per FBC. TAS 202-94
<br />2) Uniform Static Air Pressure Test, Loading per FBC, TAS 20294
<br />3) Water Resistance Test, per FBC. TAS 202-94
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loadingper FBC, TAS 203-94
<br />along with marked -up drawings and installation diagram of all PGT Industries, Inc.
<br />representative units listed below and tested to qualify Dowsd 791 and Dowsii 983 silicones,
<br />prepared by Fenestration Testing Laboratory, Inc.. Test Reports No.:
<br />FTL-7897, PGT PW5520 PVC Fixed Window (unit 6 in proposal), dated 09.'03/14
<br />FTL-20-2107.1, PGT SGD780 Aluminum Sliding Glass Door (uail 7 in proposal) FTL-20-
<br />2107.2, PGT CA740 Alum. Outswing Casement Window (unit 8 in proposal) FTL-20-
<br />2107.3, PGT PW7620A Alu mmunm Fixed Window (unit 9 in proposal) and FTL-20-2107.4,
<br />PGT PW7620A Aluminum Fixed Window (unit 10 in proposal) dated 07/13/20. all signed
<br />and sealed by Idalmis Ortega, P.E_
<br />C. CALCULATIONS
<br />1. Anchor verification calculations and structural analysis, complying with FBC 71
<br />Edition (2020), dated 04/22/20, prepared by manufacturer, signed and sealed by
<br />Anthony Lynn Miller, P.E.
<br />2. Glazing complies with ASTM E 1300-1W, -09, -12 and -16.
<br />D. QUALITY ASSURANCE
<br />Miarui-Dade Departmernl of Regulatory ,and Economic Resources (RER).
<br />E. MATERIAL CERTIFICATIONS
<br />1_ Notice ofAcceptance No_ 1M305.02 issued toKuraray America, Inc. forthe it
<br />"TrosifoU, U?ln-aclear, Clear, and Color PVB Glass Interlayers". expiring on
<br />07/08r24.
<br />2. Notice of Acceptance No.17-0803.02 issued toKuram any America, Inc. for their
<br />"SentrTGlast (Clear and White) Glass Inteiisavet'rs", using on 07.0 23.
<br />3- Notice of Acceptance No. 18-1106.10 issued to Vision Extrusions Limited for their
<br />"Brown Coated (Painted or Laminated) '%Ike Rigid P17C Exterior Extrusions
<br />for Windows and Doors", expiring on 091300-4.
<br />4. Notice of Acceptannce No.19-1106.11 issued to Vision Extrusions Limited for their
<br />series "VE 1000 Tan 202 and lighter shades (Non•-it'hnte) Rigid Cellular PVC
<br />Exterior Extrusions forte"endows and Doors", expiring on 12,29.,121_
<br />� t . 11fir.]�,
<br />Ishaq L Chanda, P.E.
<br />Product Control Unit Supervisor
<br />NOA No. 21-820a.83
<br />ExpirationDat#: April 14, 2026
<br />Approval Date: rsfarch '►S, 2021
<br />E -4
<br />PGT Industries, Inc.
<br />NOVICE OF ACCEPTANCE: EVIDENCE SIMINUTTED
<br />1. Evidence submitted under previous NOA
<br />A. DRAWINGS
<br />1. Matnrfacturer's die drawings and sections.
<br />(Submitied under h'OA & 11-01OZ 04)
<br />2. Drawing No. MD-5570.0, titled `-Vinyl Sliding Glass Door NOA W-, sheets 1
<br />through 21 of 21, prepared by manufacturer, dated 10/05/15, with revision A dated
<br />04105E 17, signed and sealed by A. Lynn Miller, P.E.
<br />B. TESTS
<br />1- Test report on 1) Uniform Static Air Press= Test, per FBC, TAS 202-94
<br />2) Large Missile Impact Test per FBC. TAS 201-94
<br />3) Cyclic Wind nd Pressure Loading FBC, TAS 203-94
<br />along with matted -up drawings and installation diagram ofvmyl sliding glass door, prepared
<br />by Fenestration Testing Labs Inc., Test Report No. FTL 9717, dated 11,07115, signed and
<br />sealed by Idalmis Ortega, P_ E. (Test report revised on 02,115116 and 02�2411 6)
<br />2, Test resort on 1) Air Infiltration Tessa, per FBC. TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94-
<br />4) Large Missile Impact Test per FBC, TAS 20194
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 20394
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along withmadoed-up drawings and installation diagram ofvmyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No_ FTL 8546, dated 11/W15, signed and
<br />sealed by Idahnis Ortega, P. E. (Pest report revised on 01,0446 and 02`11,2016)
<br />3, Test report on 1) Air Infiltration Test, per FBC. TAS 102 94
<br />2) Uniform Static Air Pressure Test_ per FBC, TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 20294
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loadingper FBC, TAS 203-94
<br />6) Famed Entry Test, per FBC, TAS 202-94
<br />along withmarkedup drawings and instalhhoa diagram ofvmyl sliding glass door,. prepared
<br />by Fenestsation Testing Lab, Inc., Test Report No_ FTL 85,47, dated 11104115, signed and
<br />sealed by Idalmis Ortega, P_ E. (Test report revised on 02/1 S46)
<br />4. Test report on 1) Air Infiltration. Test. per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
<br />3) Water Resistance 'Pest, per FBC, TAS 202-94
<br />4) Large VAssile Impad Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br />6) Forced Entry Test, per FBC, TAS 202-94
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door. prepared
<br />by Fenestration Testing I.ab, Inc., Test Report No. FTL 8_t8, dated 12104:15, signed and
<br />sealed by Idaimis Ortega, P. E_ (Test report revised on 01;104/16 and 02/11116,1
<br />f
<br />Ishaq L Chnmh. P.E.
<br />Product Control Tait Supervisor
<br />NOA No. 21-0206.03
<br />Expiration Date- April 14, 2026
<br />Approval Date: March 25, 20'21
<br />E -1
<br />CGI Windows and Doors, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBhffTTEED
<br />E. M ATERL41 C'ERTTFIC ATIONS (continue)
<br />5. Quanex Part Super Spacer Standard complying with ASTM C5IS Thermal Conductivity
<br />0.881 BTU -in/ lr.-ftr-af. ASIM F 1249 V6'VTR Pass; ASTM D3985 OrAer;Pass. ASS E
<br />2190 LG_ Durability No Fog -Pass. (SubrriNed under pre4ons -%10 4 A-6. l M409. 05)
<br />6. Qua= Part Durnseal complying with ASTM C518 Themnal Conductivity 222 BTU4n/
<br />hr_ -ft2-°F, ASTM F 1249 AWIR Pass, ASTM D 1434 Argon P -Pas& ASTM E
<br />2.189 I.G. Durability Igo Fog., ASTM E 546 Dew Point Development -20°F in 48 his.
<br />(Subnr fled under A10-4 No. 15-0400.11S).
<br />7_ Vision Extrusions, Ltd_ Parts complying with PVC-AAMA A 303-13, Voluntary Specification
<br />for Rigid Polyvinyl C it ode (PVC) Exterior Profiles for Vision Extrmons Ltd.-VEX-1 by
<br />AAMA Fenestration Exterior Profile Certification Program. (Submitted under.VO. Na 1 S-
<br />0409. 05)
<br />8. Vision Extrusions_ Ltd. Parts complying with PVC AAMA 303-13.
<br />(5ubm ifted render .N'0.4 No. 1 S-0409.05)
<br />9. PVC-AAMA 303-13, Voluntary Specification for Rigid Polyvinyl Chloride (PVC) Exterior
<br />Profiles for Vision Extrusions, Ltd--VEX-1 by AAMA Fenestration Exted" Profile
<br />Certification Program.
<br />10. Notice of Acceptance No. 18-1217.14 issued to Energi Fenestration Solution, USA, Inc. for
<br />their "Tan 3040 & light shade (non -white) A hire Rigid PVC Exterior Extrusions for
<br />Windows and Doors', expiring on 02/04t21.
<br />11 Notice of Acceptance No_ 18-0122.02 issued to Energi Fenestration Solution, USAL Inc, for
<br />their series 'A%7nite Rigid PVC Exterior Extrusions for Windows and Doors", expiring on
<br />0208.23.
<br />12. Notice of Acceptance No. 20-0203.03 issued to Energi Fenestration. Solution, USA, Inc, for
<br />their `Bronze & light shade cap coated White Rigid PVC Erterlor Extrusions for
<br />Windows and Dooms". expiring on 04/16,25.
<br />F. STATEIN ENT -TS
<br />1. Statement letter of conformance to FBC 716 Edition (2020). dated 04.22.20. issued by
<br />manufacturer, signed and sealed by Anthony Lynn Miller, RE.
<br />2. Statement letter of no financial interest and of independent. issued by nmannmfacturer, dated
<br />041181.10, signed and sealed by Anthony Lynn Miller, P.E.
<br />3. Private Labeling Ageenlent dot between PGT, dated 03,30115 and signed by all
<br />involved parties,
<br />G. OTHERS
<br />1_ This NOA revises NOA# 17-0420.06 (PVTw/CGI) and updates to FBC2020 (70 Edition),
<br />expiring 04/21,21 _
<br />2. RER Test proposals #19-1155 dated 0111620 approved by Ishaq I- Cilanda, PE, expiring
<br />04114l2 L
<br />E -5
<br />id aq L Chaa&, P.E.
<br />Product Control Unit Supervisor
<br />N OA No. 21-0205.03
<br />Expiration Date: April14,2016
<br />Approval Date: March 25, 2021
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
<br />B. TESTS (continued)
<br />5. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC. TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94.
<br />4) Lange Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loadingper FBC, TAS 203-94
<br />6) Forced Entry Test. per FBC. TAS 202-94
<br />along with matted up drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab_ Inc., Test Report No. FTL 8549. dated 11 M6/15, signed and
<br />sealed by Idalatis Ortega, P. E. (Test report revised on 12/04?15 and 02/1 If 16)
<br />6. Test report on 1) Air Infiltration Test, per FBC. TAS 202-94
<br />2) Uniform Static Air Pm =e Test, per FBC. TAS 20294
<br />3) Water Resistance Test, per FBC, TAS 20294.
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br />along with marked up drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab, Inc., Test Report No. FTI.8552, dated 12/04l15, signed and
<br />sealed by Idalmis Ortega, P. E_ (Test report revised on 0211 S2016)
<br />7. Test repast can 1) Uniform Static Air Pressure Test, per FBC. TAS 202-94
<br />2) Large Missile Impact Test per FBC, TAS 201-94
<br />3) Cyclic Wind Pressure Loading per FBC. TAS 203-94
<br />along withmarkedup drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration Testing Lab. Inc., Test Report No. FTL 6639 (samples A-1 thru A-22), dated
<br />11 19/10, signed and sealed by Jorge A- Causo, P. E. (SubmNed ader. 0-4 Xe. I1-
<br />0107 04)
<br />8 Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
<br />2) Uniform Static Air Pressure Test, per FBC. TAS 202-94
<br />3) Water Resistance Test, per FBC, TAS 202-94-
<br />4) Large Missile Impact Test per FBC, TAS 201-94
<br />5) Cyclic Mind Pressure Loadi ngper FBC, TAS 203-94
<br />6) Forced Entry Test, per FB-C, TAS 202-94
<br />along with marked -up drawings and installation diagram of vinyl sliding glass door, prepared
<br />by Fenestration. Testing Lab, Inc, Test Report No. FTL 6337 (samples A-1 thru A-5), dated
<br />12106/10, signed and ,sealed by Jorge A. Cam, P. E. (Submitted under :%-Q4 Ao.11-
<br />010709)
<br />C. CALCITI.ATIONS
<br />1. Anchor verification calculations and structural analysis, complying with FBC-2014,
<br />prepared by PGT, dated 12,V945and last revised on 0?'15/16, signed and sealed by
<br />AnthonyL. Miller:. P.E. (Submbled under.' OAXe.154210.01).
<br />2. Glazing complies with ASTNIE-1300-09_
<br />Ishaq L Chands, P.E.
<br />Product Control Unit Supervisor
<br />NOA No. 2i-0205.03
<br />Expiration Date; :April 14, 2026
<br />Approval Date: March 25,1021
<br />E -2
<br />PGT Industries, tar.
<br />NOTICE OF ACCEPTANNU: EVIDENCE SUBAUTTED
<br />3. New Evidence Submitted
<br />A. DRAWINGS
<br />1. Drawing No_ 3IDM570.0 Rev B. titled -Vinyl Sliding Glass DoorNOA (I.1V . sheets I
<br />through 21 of 21. prepared by manufacturer. dated 10/05/15 and last retiised on 02VI+2L
<br />signed and sealed by A Lynn Miller, P.E.
<br />Note. This revision consists rrpiaceuunt of same existing installation screw with flat head.
<br />B. TESTS
<br />1. Norte.
<br />C. CALCULATIONS
<br />1_ None_
<br />D. QUALITY ASSURANCE
<br />L Miami -Dade Department of Regulatory and Economic Resources (RER)_
<br />E, MATERL41 CERTIFICATIONS
<br />I_ Notice of Acceptance No.19-0305.02 issued to Kurarat Alnierica, Inc. for their
<br />"Trosifoll, 11traclear, Clear, and Color P`B Glass Interlasers-, expiring on 07*8I24_
<br />2. Notice of Acceptance No.17-0808.02 issued to Kuraray America, Inc. fm their
<br />"SentryGbvt (Clear and Waite) Glass Interla4 eii", expiring on 07/04,123,
<br />3. Notice ofAcceptance No. 18-1106.10 issued to Vision Extrusions Limited for their `Brown
<br />Coated (Painted or Laminated) White Rigid PVC Exterior Extrusions for Windows
<br />and Doors", expiring on 0930124.
<br />4_ Notice of Acceptance No.18-110611 issued to Vision Extrusions Limniied for their series
<br />"VE 1000 Tan 202 and lighter shades (tiou-W'h#e) Rigid Cellular PVC Exterior
<br />Extrusions for Windows and Doors", expiring on 11-7.9,121.
<br />F. STATE_NIEkTS
<br />i_ Statement letter of conformance to FBC 716 Edition (2020), dated 0201/21. issued by
<br />manufacturer, signed and sealed by Anthony Lynn Miller, P.E.
<br />2_ Private Labeling Agreement dated 03.V&121 between PGT Industries, Inc. and CGI
<br />Windows and Doors Inc.. signed by Dean Iv Ruark, P.E.. V.P. Engineering. on behalf of
<br />both companies..
<br />G. OTHERS
<br />1_ This NOA revises & renews NOA# 20-0429.05 (PLA w/CGI), expiring 041141.6.
<br />2. The current associated PLA CGI file #21-0205.01, expiring 0444026.
<br />E -6
<br />t
<br />Ishaq L Cltanda, P.E.
<br />Product Contrail Unk Supervisor
<br />NOA No. 21-0205.03
<br />ExpirationDaim: April14,2026
<br />Approval Date: March 15. 2021
<br />PGT Industries, Inc.
<br />NOTICE OF ACCEPTANCE: EVIDENCE SUBM TIED
<br />D. QU,ALrrY ASSURANCE
<br />1. Miami Dade Department of Regulatory and Economic Resources (RER)_
<br />E. MATERIAL CERTIFICATIONS
<br />1. Notice of Acceptance No. 1". 529.14 issued to Vision Extrusion Limited for their
<br />-I%Ik to Rigid PVC Exterior Extrusions for Windows and Doors''. dated 08/13/15.
<br />expiring on 09-r30119.
<br />2. Notice of Acceptance No.16-0920.08 issued to Vision Extrusion Limited for their ' 171
<br />1000 Tan 202 and tighter Shades {Non-317nite) Rigid. P17C Exterior Extrusions for
<br />Windows and Doors". dated 1110VI6. expiring on 1129!21.
<br />3. Notice of Acceptance No.1-"528.15 issued to Vision Extrusion Limited for their
<br />"Brown Coated (Painted or Laminated) White Rigid PVC Exterior Extrusions .for
<br />Windows and Doors", dated 08113115, expiring on 0930/19_
<br />4. Notice of Acceptance No.16-0712.02 issued to ENERGI Fenestration Solutions USA,
<br />Inc. for their "TAIN 3040 and Lighter Shades (Non -White) Rigid PVC Exterior
<br />Extrusions for Windows and Doors' dated 09115116- erring on 02104121.
<br />5. Notice of Acceptance No-16-0712.0--1 issued to ENERGI Fenestration Solutions USA,
<br />Inc. for their "Bronze and Lighter Shades of Cap Coated Rigid PVC Exterior
<br />Lift-tisions for Windows and Doors" dated 09/15/16, expiring on 04/16+20.
<br />& Notice of Acceptance No. 164712.03 issued to ENERGI Fenestration Solutions USA,
<br />Inc. for their' White Rigid PVC Exterior Extrusions for Windows and Doors" dated
<br />0&110117, expiring on 0128/1 S.
<br />7. Test reportsNo(s). 10-002-792(A), 10-06-MO527, 535753-09. perASTME-84.
<br />ASTMD 1929 and ASTMD-635, issued by EXOVA to Vision Extrusion for cel ukmc
<br />composite material.
<br />(Subm tited under X0 4 v.11-0107 04)
<br />8. Notice of Acceptance No.14-0916.11 issued to Kuraray America., Inc. for their
<br />"°Sentr yGlast (Clear and White) Interlayee, 8 on OVO4/18.
<br />9. Notice ofAcceptance No.16-1117.01 issued to Kuratay America, Inc- for their
<br />"Troaollt U-1tr. aclear, Clear and Color PVB Interiayers ', expiring an 07M8?19.
<br />F. STATE?�NTS
<br />1- Statemmt letter of conformance with FBC-511Edition (2014) and FBC-0 Edition
<br />(2017). issued by manufacfiurr, dated 09/14.117, signed & sealed by Lynn Miller, PE_
<br />2_ Statement letter of no financial interest, dated 04/18t17, issued by Manufacturer, signed
<br />& sealed by Lynn Miner, P.E.
<br />3. Ixtterof lab compliance, part of the above test reports.
<br />4. RER Test Proposal No.17-0387. dated 090517. signed by Ishaq Chanda. P.E_
<br />G. OTHER
<br />1. Notice of Acceptance No.15-1210.01, issued to PGT Industries, for their Series
<br />-5570,'2770" Vinyl Sliding Glass Door (Reinforced) - L.M.I.", expiring on 04/1,Q1 _
<br />E -,3
<br />1 c�� 7
<br />Ishaq L Ciiaada, P.E.
<br />Product Control Unit Supervisor
<br />NOA No. 2142055.03
<br />EspiratianDate: April14,2026
<br />Approra I Date, March 2S,2021
<br />N
<br />N
<br />2
<br />O
<br />U
<br />O
<br />OL
<br />a
<br />o
<br />O
<br />c
<br />. CD
<br />C5-0a-
<br />U
<br />�
<br />to
<br />CD
<br />C
<br />'=
<br />CU
<br />cu
<br />'a
<br />N
<br />C
<br />O
<br />?�
<br />CU
<br />C
<br />O
<br />-1.-_
<br />CU
<br />LL.
<br />O
<br />CU
<br />.Cn
<br />v�
<br />"0
<br />E
<br />w
<br />U-O
<br />O
<br />2.
<br />F—
<br />C.6c
<br />-0
<br />C/)
<br />Q
<br />Q
<br />Z
<br />Z
<br />W
<br />.J
<br />cn
<br />CV
<br />0
<br />N
<br />w
<br />N
<br />6
<br />+:Ei CG
<br />r- o
<br />C-, M
<br />C'S
<br />Q
<br />N
<br />,l x
<br />�-
<br />.y
<br />O �
<br />y
<br />N t
<br />+ N
<br />� X
<br />•�
<br />c
<br />cc
<br />•3
<br />,�,
<br />°'
<br />y
<br />U
<br />C O
<br />E
<br />0
<br />V
<br />q
<br />E
<br />tf�
<br />Cn
<br />_
<br />co
<br />O
<br />>
<br />L
<br />CL
<br />O
<br />CL
<br />Q
<br />L
<br />v
<br />O
<br />L
<br />CU
<br />�J
<br />CU
<br />m
<br /><
<br />CL
<br />O
<br />LCU
<br />w
<br />Z J
<br />Z
<br />Z
<br />Q
<br />J
<br />a
<br />SHEET NO.
<br />PA 1 A
<br />August 10,
<br />
|