|
GENERAL NOTES:
<br />1 INSTALLATION OF ALL TRADES SHALL CONFORM WITH LOCAL REQUIREMENTS.
<br />BIDDERS PRINTS ISSUE)
<br />JANUARY 17.200'!
<br />BULLETIN #1
<br />APRIL 16. 2007
<br />BULLETIN #2 - CITY COMMENTS
<br />MAY 23, 2007
<br />SITE LOCATION MAP
<br />SCALE: NTS
<br />n
<br />,,I
<br />NORTH
<br />U.S. HIGHWAY 301
<br />SITE LOCATION PLAN
<br />NORTH
<br />APPR OV
<br />by Fire Marshal of Z.ephyrhilis
<br />with co s provided with lan(s)
<br />Building shall comply with,
<br />the applicable codes of
<br />Florida Fire Pre =Tendon handbook
<br />NFPA &. the City of Zephyrhills
<br />BUILDING INFORMATION
<br />THESE CONSTRUCTION DOCUMENTS COMPLY AND HAVE BEEN
<br />PREPARED IN COMPLIANCE TO THE FOLLOWING CODES:
<br />BUILDING CODE:
<br />MECHANICAL CODE:
<br />MECHANICAL
<br />ELECTRICAL CODE:
<br />PLUMBING CODE:
<br />PLUMBING
<br />HANDICAP CODE:
<br />ICC/ANSI A117.1-1998
<br />ENERGY CODE:
<br />MODIFIED BY UCC
<br />FIRE CODE:
<br />FLORIDA BUILDING CODE - 2004 EDITION
<br />FLORIDA BUILDING CODE - 2004 EDITION -
<br />2002 NATIONAL ELECTRICAL CODE / NFPA 70
<br />FLORIDA BUILDING CODE - 2004 EDITION -
<br />UCC BARRIER FREE SUBCHAPTER 7 AND
<br />CABO MODEL ENERGY CODE 1995 AND AS
<br />FLORIDA FIRE PREVENTION CODE 2004
<br />NFPA 101 LIFE SAFETY CODE
<br />CONSTRUCTION TYPE: 2-B
<br />USE GROUP: I'M" MERCANTILE
<br />NUMBER OF STORIES: 1
<br />HEIGHT OF STRUCTURE: 251-1011
<br />SALES AREA S.F.: 70,082 SO. FT.
<br />STOCK AREA S.F.: 12,285 SO. FT.
<br />TOTAL EXISTING BUILDING AREA: 89,308 SO. FT
<br />TOTAL NEW BUILDING AREA: NONE
<br />UNLIMITED AREA, BUILDING FULLY SPRINKLERED
<br />TRAVEL DISTANCE ALLOWED IS 250'
<br />2. CONTRACTOR SHALL BE HELD TO HAVE EXAMINED THE PREMISES AND VERIFIED LOCAL REGULATIONS
<br />PRIOR TO SUBMITTING HIS BID, HE SHALL NOTIFY SEARS PROJECT MANAGER OF ANY DISCREPANCIES OR
<br />OMISSIONS PRIOR TO CONSTRUCTION.
<br />3, CONTRACTOR SHALL MAKE APPLICATIONS FOR AND PAY ALL FEES IN CONNECTION WITH ANY PERMITS,
<br />INSPECTIONS, TESTS; ETC., THAT MAY BE REQUIRED FOR THIS WORK
<br />4 GUARANTEE ALL WORKMANSHIP, MATERIAL AND PERFORMANCE FOR A PERIOD OF ONE (1) YEAR FROM
<br />DATE OF ACCEPTANCE. (UNLESS OTHERWISE NOTED).
<br />5. THE CONTRACTOR SHALL MAKE NO CHANGES FROM THE CONTRACT DOCUMENTS, CHANGES TO THE
<br />SCOPE OF WORK OR EXTRAS WHICH INVOLVE COST WILL NOT BE HONORED WITHOUT THE PRIOR APPROVAL
<br />OF THE SEARS PROJECT REPRESENTATIVE, ANY CHANGES MADE WITHOUT PRIOR APPROVAL WILL BE REBUILT
<br />TO THE ORIGINAL CONDITION AT THE CONTRACTOR'S EXPENSE,
<br />6. THE CONTRACTOR AND SUB -CONTRACTOR SHALL BE SUBJECT TO ALL KMART SECURITY POLICIES. KMART
<br />CORPORATION RESERVES THE RIGHT TO CONDUCT SECURITY INSPECTION.
<br />7. ALL WORK SHALL BE PERFORMED WITH MINIMUM INTERFERENCE OF KMART
<br />OPERATIONS.
<br />8. ALL DIMENSIONS ARE TO BE VERIFIED IN FIELD WITH EXISTING CONDITIONS.
<br />9. PATCH AND REPAIR ALL WALLS PRIOR TO PAINTING.
<br />10, REPLACE OR REPAIR ALL DAMAGED WORK IN AREAS AFFECTED BY DEMOLITION OR ALTERATION TO
<br />MATCH EXISTING ADJACENT.
<br />11. ALL EXISTING FINISHES, SUCH AS FLOOR TILE, BASES, WAINSCOTS, WALL COVERINGS, CEILING TILE ETC.
<br />TO REMAIN UNLESS OTHERWISE NOTED,
<br />12, MATERIAL NOT SPECIFICALLY SPECIFIED SHALL BE EQUAL IN QUALITY TO EXISTING MATERIAL OR LIKE
<br />KIND. ALL INTERIOR FINISH MATERIALS SHALL MEETTHE REQUIREMENTS OF FEDERAL SPECIFICATIONS
<br />SS-S-118A, CLASS 25 NONCOMBUSTIBLE AND SHALL BE CLASSIFIED BY UNDERWRITERS' LABORATORIES, INC.,
<br />UNDER HAZARD CLASSIFICATION FOR A FLAME SPREAD OF 0-25.
<br />13. ALL EXISTING EQUIPMENT IS THE PROPERTY OF KMART CORPORATION AND SHALL NOT BE DISPOSED OF
<br />UNTIL SO DIRECTED BY THE PROJECT REPRESENTATIVE. THIS EQUIPMENT INCLUDES BUT IS NOT LIMITED TO
<br />HEATERS, LIGHTS, KITCHEN EQUIPMENT, STORE FIXTURES, ETC. DEMOLITION MATERIALS SUCH AS
<br />CONCRETE BLOCKS, ELECTRICAL CONDUIT, PLUMBING PIPES, GYPSUM BOARD AND ETC. SHALL BE DISPOSED
<br />OF. EQUIPMENT SHALL BE REMOVED AND STORED ON SITE BY THE CONTRACTOR. IF DISPOSAL OF THE
<br />EQUIPMENT IS NOT DESIGNATED OTHERWISE BY THE PROJECT REPRESENTATIVE, THE CONTRACTOR SHALL
<br />DISPOSE OF THE EQUIPMENT AS DIRECTED,
<br />14. CONTRACTOR IS RESPONSIBLE FOR TRASH REMOVAL AND KEEPI NG THE PROJECT CLEAN AT ALL TIMES,
<br />15. AT DEMOLITION OF WALL LOCATIONS, REMOVE ALL ANCHOR BOLTS FLUSH WITH FINISH FLOOR,
<br />16, CONTRACTOR HAS THE OPTION TO USE WOOD STUDS IN LIEU OF METAL STUDS.
<br />17. DURING CONSTRUCTION AND DEMOLITION, CONTRACTOR SHALL TAKE EVER PRECATION TO PROTECT
<br />AND SAFEGUARD ALL PEDESTRIANS
<br />18. CONSTRUCTION EQUIPMENT AND MATERIALS SHALL BE STORED AND PLACED SO AS NOT TO ENDANGER
<br />THE PUBLIC, OR THE WORKERS FOR THE DURATION OF THE PROJECT.
<br />MECHANICAL GENERAL NOTES:
<br />1. THE CONTRACTOR SHALL RELOCATE EXISTING FIRE EXTINGUISHERS AS
<br />NECESSARY. REPAINT RED TRIANGLES ON WALL AND RED STRIPES ON COLUMNS
<br />AS REQUIRED BY THE RELOCATION OF FIRE EXTINGUISHERS. PAINT OUT
<br />INDICATORS NO LONGER APPLICABLE. SEARS WILL FURNISH AND INSTALL ALL
<br />NEW EXTINGUISHERS.
<br />2. NEW SPRINKLERS SHALL MATCH THE EXISTING SPRINKLERS. IF THE EXACT
<br />SPRINKLER MODEL IS NO LONGER AVAILABLE FROM THE MANUFACTURER,
<br />PROVIDE SPRINKLER EQUIVALENT TO THE EXISTING SPRINKLERS IN SPRAY
<br />PATTERN, TEMPERATURE, THERMAL ELEMENT (FUSIBLE LINK OR GLASS BULB),
<br />RECESS TYPE AND FINISH.
<br />3. THE SPRINKLER SYSTEM FOR ALL AFFECTED STORE AREAS SHALL BE
<br />DESIqED, MODIFIED, FABRICATED AND INSTALLED IN ACCORDANCE WITH
<br />NFPAII (CURRENT EDITION AS ADOPTED BY THE LOCAL AUTHORITY HAVING
<br />JURISDICTION), AND THE LOCAL AUTHORITY HAVING JURISDICTION.
<br />LIST OF DRAWINGS
<br />NO. TITLES
<br />CS
<br />COVER SHEET
<br />A-1
<br />FLOOR PLAN
<br />A-2
<br />PLANS, ELEVATIONS AND DETAILS
<br />A-3
<br />OUTSIDE .STORAGE AND DOOR SCHEDULE
<br />AL-1
<br />RESTROOM RENOVATION
<br />SP-1
<br />ARCHITECTURAL SPECIFICATIONS
<br />Sr -2
<br />ARCHITECTURAL SPECIFICATIONS
<br />M-1
<br />TOILET - PLANS
<br />E-1
<br />POWER PLAN
<br />E-2
<br />ENLARGED PLANS & DETAILS
<br />E-3
<br />ENLARGED PLANS & DETAILS
<br />LV-1
<br />SENCORESYSTEM WIRING DIAGRAM (TYPICAL)
<br />F-1
<br />SALES AREA FIXTURE LAYOUT (REFERENCE ONLY)
<br />D-1
<br />EXTERIOR SIGN ELEVATIONS (REFERENCE ONLY j
<br />V)
<br />�./
<br />O
<br />Zct
<br />Q
<br />O
<br />�
<br />a>
<br />v�
<br />�=
<br />w
<br />L
<br />,ryY') C'd
<br />UO)
<br />x
<br />w
<br />L L1
<br />Cn
<br />LLI
<br />0
<br />0
<br />Q
<br />0
<br />ry
<br />0
<br />J
<br />LL
<br />ry
<br />J
<br />Q
<br />J
<br />=
<br />Lu
<br />�
<br />0
<br />=
<br />m
<br />LLI
<br />J
<br />N
<br />J
<br />r
<br />V
<br />CD
<br />CV
<br />to
<br />0
<br />Q
<br />CC
<br />w
<br />m
<br />cc)
<br />CIOz
<br />zz
<br />Q
<br />0
<br />CD
<br />F=
<br />_Q
<br />w
<br />U,
<br />�zzw
<br />0
<br /><
<br />0
<br />Q
<br />w
<br />0
<br />�
<br />�
<br />U
<br />Lu�
<br />0
<br />v�
<br />U
<br />w
<br />Project Arch./ Engineer:
<br />R.THORNTON
<br />Drawn:
<br />RKT
<br />Checked:
<br />JOHN LINEGAR
<br />Date:
<br />JANUARY 17, 2007
<br />SCALE: NTS
<br />Sheet No:
<br />
|