7631 Gall Blvd (36) - Laserfiche WebLink

Browse Search

i 1.4 DEFERRED SUBMITTALS — FABRIC CANOPY ' C. Definition: Deferred Submittal are submittals required by the AHJ for code compliance but which, rather than being submitted at the time of permit application, have been allowed by the AHJ to be deferred until after Contract award to enable the successful Contractor, Subcontractor, or Supplier to submit the applicable submittals. ' D. Submit the deferred submittals to the extent indicated on the Deferred Submittal Table located on the Drawing Cover Sheet. ' E. Prepare submittals in accordance with requirements stated in the applicable individual Specifications Sections and the applicable requirements herein 1. FABRIC CANOPY Requirements are as follows: ' a. Coordinate with Wal-Mart Store Planning through the Wal-Mart Construction Manager to obtain copy of approved submittal package. b. Shop Drawings: 1) Floor plan details of FABRIC CANOPY construction showing configuration, dimensions and materials. 2) Details of FABRIC CANOPY connection to building, where applicable 3) Seismic bracing and connections (where required). C. Calculations: Structural calculations and seismic provisions where applicable. F. Process: 1. Immediately after award of the Contract, the Contractor shall contact the AHJ to coordinate and determine the AHJ requirements for deferred submittals. Information obtained shall include such requirements as number of copies; extent of detail of information to be submitted; review, if required, by Professional of Record (Architect or Engineer); and other necessary process and procedural requirements. 2. The Contractor, or other entity, responsible for the submittal shall submit, track, and report submittal status to ' the Wal-Mart Construction Manager through final approval and issue of permit. 3. Communicate with vendors, suppliers, and Subcontractors the AHJ requirements for deferred submittals. Receive, review, and stamp submittals in accordance with submittal requirements herein. 4. Transmit deferred submittals directly to AHJ unless otherwise requested by AHJ to obtain prior review and ' approval by Professional of Record. 5. Upon approval by AHJ, obtain permits and pay permit fees and other fees required by the AHJ. 6. Attach approved deferred submittals to the approved "Permit Set" documents at the project site. 7. Do not install deferred submittals until corresponding submittal documents have been approved by the AHJ. 1.5 SUBMITTAL REQUIREMENTS ' A. Shop Drawings 1. Submit Drawings with graphic information at accurate scale. Show dimensions and note which dimensions are based on field measurement. Identify materials and products in Work shown. Indicate compliance with specified standards and special coordination requirements. Do not use reproductions of Contract Drawings as Shop Drawings. 2. Include on each Shop Drawing the drawing title, number, original issue date, and revision numbers and dates, in addition to other required identifying information. 3. Identify details by reference to sheet, detail, schedule, or room names shown on the Contract Drawings. 4. Identify numerical values in English units. 5. Size: Not less than 8-1/2 by 11 inches nor more than 30 by 42 inches. a. For Shop Drawings submitted on sheets larger than 8-1/2 x 11 inches, submit reproducible transparency and blueline or blackline reproduction. b. For Shop Drawings submitted on sheets 8-1/2 x 11 inches, conform to requirements for Product Data and submit as a bound volume for submittal required. 01330 - 3 0706 - Zephyrhills, Florida - 16592140 February 16, 2017