Laserfiche WebLink
.(E)POTTER <br />® The Symbol of Protection <br />Features <br />• 100 addresses available on this analog addressable system <br />• Additional system capacity achieved via multi -point SIX modules <br />• 99 software zones <br />• NFPA 72 Compliant Smoke Sensitivity Test Built -In <br />• System Operates as Class A or Class B for SLC, P-Link and NACs <br />• 5 Amp Power Supply, Expandable to 310 amps <br />• 2 NAGS, Regulated, Rated at 3 Amps each, expandable to 188 <br />• 2 Input/Output (1/0) Circuits for system flexibility rated at 1 Amp <br />each <br />• Strobe Synchronization and System Wide Sync for Gentexk, <br />AMSECOS, Cooper Wheelock and System SensorR strobes <br />• Dedicated Alarm, Supervisory and "trouble Relays <br />• 4,000 Event History Butler <br />• Optional two line DACT with UD-2000 that can report General, <br />Zone or Point Information <br />• Built in IP Communicator <br />AFC-100 <br />Fire Alarm Control Panel <br />Q�SEMB�EO <br />P <br />•/2Jy <br />• Ethernet Port for Programming and Network Connectivity O <br />• E-Mail System Status, Reports and Event Information NYC Fire Dept. <br />• Product includes 5 year warranty FM Certificate of Approval 2 U� <br />6256 LISTED <br />APPROVED 7165-0328:0509 S735 <br />Description <br />The AFC-100 is an analog/addressable fire alarm system with a total <br />system capacity of 100 addresses. Additional capacit-% on the system is <br />achieved using multi -point SLC modules. The control panel utilizes the <br />exclusive Potter protocol that includes a complete line of sensors and <br />modules. Each SLC may be comprised of any combination of smoke <br />sensor, heat detectors or modules and allows for a total of 50 ohms of <br />impedance and may use any wire compliant with the National Electrical <br />Code (NEC). <br />The AFC-100 has a 5 Amp power supply with two Notification <br />Appliance Circuits (NACs) and two Input/output (1/0) circuits. The <br />NACs are rated at 3 Amps each and the I/Os are rated at 1 Amp each. <br />Each output is regulated and power limited. In addition, each output is <br />uniquely programmable and may be configured for steady signal, strobe <br />synchronization, constant power, door holder power, or releasing. The <br />strobe synchronization includes Gentcx. AMSECO, System Sensor and <br />Cooper/Wheelock and with the exclusive Quadrasyne each output may <br />have a unique brand and all strobes w ill flash together. <br />The NACs may be expanded using the PSN-1000 series intelligent power <br />supplies. Each PSN-1000 adds another 10 Amps of power, 2 additional <br />input circuits and the AFC-100 will support up to 31 power supplies. The <br />system will synchronize the strobes system wide. In addition the PSN- <br />1000E has space to allow the installation of up to six loop expansion cards. <br />The cards mount on a stacker bracket that allows access to all SLC circuit <br />connections. <br />Technical Specifications <br />Dimensions <br />16"W x 17H x 3'/8"D <br />AC Mains <br />3.0 Amps it 120 VAC 50/60 HZ <br />2.0 Amps r 240 VAC 50/60 HZ <br />Enclosure <br />16 gauge cold rolled steel with removable <br />locked door with Lexan viewing window <br />Standby Current-130 mA <br />Alarm Current-200 mA <br />• 5 Amps power for NACs, I/O, and P-Link <br />Battery <br />3 Amps per NAC, regulated <br />• 1 Amp per I/O circuit, regulated <br />• Battery Charger range 8-55 Ah <br />• Battery Charger voltage 27.3 VDC <br />• P-Link maximum current of 1 Amp <br />Temperature and <br />320 to 1201 (0°C to 49'C) with a maximum <br />Humidity Range <br />humidity of 93% non -condensing. <br />Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com <br />__.711:111,­11 _ .................... <br />8830134 - REV E • 919 PAGE I OF 4 <br />