38508 A Ave (3) - Laserfiche WebLink

Browse Search

OPTIONAL MODULES AND PERIPHERALS Supplemental Power Supply (SPS) (P/N 10-2474-P)* The 10-2474 p includes the power supply circuit board and transformer (-1 for 120VAC primary; -2 for 240Vt1C primary). This module adds up to 2.OA external standby power and 6.OA alarm power (4 i standby/12:'� alarm total). AC: power and standby batteries are supervised. Supports charging up to 75.'�h of additional standby battery. Charging may be turned off in configuration if batteries are not required on SPS. Control Board dimensions: 4-1/2" L x 5-1/2" H x 2" D. Weight: 0.66 lbs. Transformer dimensions: 5" L x 3-3/4" H x 3-1/2" D. Weight: ,'• lbs. Supplemental Loop Module (SLM), (P/N 10-2473)* T'he SLM adds two more SL,C loops. Loop specifications and wiring for SLA1: are the same as the main controller. It interfaces to the main Control Panel using four standoffs supplied with the SI,M. Dimensions: 2" I, x 6-1,/2" H x 1"D. Weight: 0.12lbs. Point ID Dact (Digital Alarm Communicator Transmitter) Module (P/N 10-2528)* The DACT provides interface with Central Station monitoring systems. It is available with 5 contact zones of connection OR the intelligent serial interface which provides point ID information. The Contact ID form is the preferred reporting format. It provides a four digit account code followed by a three digit event code, a two -digit group number, and a three digit contact number, all of which are used to pro,6de specific point identification. This DACT can also provide an SIA or 4/2 Pulse reporting format. Note: 10-2476 is the same as 10-2528 wzth enclosure for external mounting. Dimensions: 6-1/2" I, x 4" 11 x 1" D. Weight 0.32 lbs. Fike Relay Module (P/N 10-2204)* The CRlt14 provides 4 additional independently programmed relays. Cheetah hi Control Panel supports up to 2 CRD44 modules (if either options are not unused) on the main controller board. Each relay may be wired across normally open or normally closed contacts. Dimensions: 3-1/2" L x 1-1/2" H x 2" D. Weight: 0.10 lbs. Fike Reverse Polarity Module (CRPM) (P/N 10-2254)* The reverse polarity module provides the ability for UL Remote Station supervision. This supervision is typically performed with a direct, leased line connection. It interfaces to the main control board using four standoffs supplied with the RPM. Dimensions: 3-1/2" L x 1-1/2"' H x 2" D. Weight: 0.08 lbs. 14 Button Remote Display Unit ( P/N 10-2646)* The Fike fourteen button remote display (FRD), provides remote annunciation of Fike's intelligent control panels. The FRD is provided with a 80 character, backlit display which performs two display functions. First, it duplicates information provided by the control panel. Additionally the FRD has the capability of viewing system conditions such as alarm, trouble, supervisory, etc. The FRD also includes six buttons (Enter, Escape, +j-, left/right arrow) that are used for navigation through events as well as configuration of the device. Additionally it has eight programmable buttons that can be configured for things such as reset, silence, acknowledge, drill, or process. A key lock is included for additional security, access. Dimensions: 9-1/2" L, x 4" H x 2-1/4" D. W' eight: 0.5 lbs. 10 Button Remote Display Unit (P/N 10-2631)* The Fike ten button remote display (FRD), provides remote annunciation of Fike's intelligent control panels. The FRD is provided with a 80 character, backlit display which performs two display functions. First, it duplicates information provided by the control panel. Additionally the FRD has the capability of viewing system conditions such as alarm, trouble, supervisory, etc. The FRD also includes six buttons (Enter, Escape, +I-, left/right arrow) that are used for navigation through events as well as configuration of the device. Additionally it has four dedicated buttons that perform the following functions: drill, silence, acknowledge, and reset. A key lock is included for additional security access. Dimensions: 7-3/4" L x 4" H x 2-1/4" D. Weight: 0.5 lbs. 2 Button Remote Display Unit (P/N 10-2630)* The Fike two button remote display (FRD), provides remote annunciation of Fike's intelligent control panels. The FRD is provided with an 80 character, backlit display which performs two display functions. First, it duplicates information provided on the main control panel. Additionally, the FRD has the capability of mewing system conditions such as alarm, trouble, supervisory, etc. Dimensions: 5-3/4" L x 4" 1I x 1-1/2" D. Weight 0.5 lbs. See ordering information for individual data sheet that gives additional specifications Page 4