00-9193 - Laserfiche WebLink

Browse Search

ATTACHED & FREESTANDING COVERS AND UTILITY SHEDS SECTION 2 1-1/2" x 1-1/2" x 0,080" ANGLE EACH SIDE OF CONNECTING BEAM WITH SCREWS AS SHOWN @ @ @ @ @ @ W -l lD ~ a::: w Cl. ::I: ~ Cl. W C PRIMARY BEAM (SEE TABLE 2 1 1 AND/OR TABLE 2,12) CARRIER BEAM (SEE TABLE 2,1.3) MINIMUM #8 S.M.S. x 3/4" LONG NUMBER REQUIRED EQUAL TO BEAM DEPTH IN INCHES NOTE: EXTRUSIONS WITH INTERNAL SCREW BOSSES MAY BE CONNECTED WITH (2) #10 x 1-1/2" INTERNALLY CARRIER BEAM TO BEAM CONNECTION SCALE: 1/4" = 1" ANGLE OR RECEIVING CHANNEL NOTE: EXTRUSIONS WITH INTERNAL SCREW BOSSES MAY BE CONNECTED WITH (2) #10 x 1 1/2" INTERNALLY, MINIMUM #8 S.M,S. x 3/4" LONG NUMBER REQUIRED EQUAL TO BEAM DEPTH PRIMARY BEAM (SEE TABLE 2.1.1 AND/OR TABLE 2.1.2) W -l lD ~ a::: w Cl. ::I: ~ Cl. W C BEAM TO WALL CONNECTION: (2) 2" x 2" x 0,060" EXTERNALLY MOUNTED ANGLES ATTACHED TO WOOD WALL WITH MINIMUM (2) 3/8" x 2" LAG SCREWS PER SIDE OR (2) 1/4" x 2 114" CONCRETE ANCHORS TO CONCRETE OR MASONRY WALL ADD (1) ANCHOR PER SIDE FOR EACH INCH OF BEAM DEPTH LARGER THAN 3" (ALTERNATE) (1) 1 3/4" x 1 3/4" x 1 3/4" x 1/8" INTERNAL U-CLlP ATTACHED TO WOOD WALL WITH MINIMUM (3) 1/4" x 21/4" LAG SCREWS PER SIDE OR (3) 1/4" x 21/4" CONCRETE ANCHORS TO CONCRETE OR MASONRY WALL ADD (1) ANCHOR PER SIDE FOR EACH INCH OR CANTILEVERED BEAM DEPTH LARGER THAN 3" CARRIER BEAM TO WALL CONNECTION SCALE: 1/4" = 1" Lawrence E. Bennett, P.E. CIVIL ENGINEER. DEVELOPMENT CONSUL TANT P,O BOX 4368, SOUTH DAYTONA. FL 32121 TELEPHONE (904) 767-4774 FAX (904) 767-6556 SEAL @ COPYRIGHT 1999 NOT TO BE REPRODUCED IN WHOLE OR IN PART WITHOUT THE WRITTEN PERMISSION Of LAWRENCE [ BeNNETT, P r PAGE 65