03-1944 - Laserfiche WebLink

Browse Search

ing plate: 5" (127 mm) wide x 5-5/8" (142.875 mm) high x 1-5/16" (33.338 mm) deep. Weight, horn only: 7.2 oz. (204 g). Weight, strobe and horn/strobe: 8.8 oz. (250 g). Mounting: standard boxes 4" x 4" x 1-1/2" deep (101.6 x 101.6 x 38.1 mm) or 2" x 4" x 1-7/8" deep (50.8 x 101.6 x 47.625 mm). Operating temperature, indoor: 320F to 1200F (OOC to 490C). Weatherproof models, horn and horn strobes: 320F to 1500F (OOC to 660C); outdoor strobe only: -40oF to +1580F (-40oC to +700C); ULC Canadian models: -40oC to +660C. Maximum humidity: 95% as tested per UL 464. Voltages: 12 or 24 VDC and FWR unfiltered. Operating voltage range:* 12-volt models: 10.5 - 17 V. 24-volt models: 20 - 30 V. With Sync-Circuit™ module MOL *: 12-volt models: 11 - 17 V. 24-volt models: 20 - 30 V. See current draw tables on page 4. - These products should be operated within their rated voltage range. UL does, however, test functional integrity to -20% and +10% of manufacturer's stated ranges. U.S. Patent Numbers: 5,593,569. 5,914,665. 6,049,446. ENGINEERING SPECIFICATIONS General - SpectrAlert@ horns, strobes and horn/strobes shall be capable of mounting to a standard 4" x 4" x 1-1/2" (101.6 x 101.6 x 38.1 mm) backbox or a single-gang 2" x 4" x 1-7/8" (50.8 x 101.6 x 47.625 mm) backbox using the universal mounting plate included with each SpectrAlert@ product. Also, SpectrAlert@ products, when used in conjunction with the accessory Sync-Circuit™ Module, shall be powered from a non-coded power supply and shall operate on 12 or 24 volts. 12-volt rated devices shall have an operating volt- age range of 10.5 - 17 volts. 24-volt rated devices shall have an operating voltage range of 20 - 30 volts. SpectrAlert@ products shall have an indoor operating temperature range of 320F to 1200F (DOC to 490C) and operate from a regulated DC or full-wave recti- fied, unfiltered power supply. Horn - Horn shall be a System Sensor SpectrAlert@ model capable of operating at 12 and 24 volts. Horn shall be Listed to UL 464 for fire protective signaling systems. The horn shall have two tone options, two audibility options (at 24 volts) and the option to switch between a temporal 3 pattern and a non-tem- poral continuous pattern. All horn models shall operate on a coded power supply. Strobe - Strobe shall be a System Sensor SpectrAlert@ model Listed to UL 1971 and be approved for fire protective service. The strobe shall be wired as a primary signaling notifica- tion appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. Horn/Strobe Combination - Hom/strobe shall be a Sys- tem Sensor SpectrAlert@ model Listed to UL 1971 and UL 464 and shall be approved for fire protective service. Horn/ strobe shall be wired as a primary signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have two tone options, two audibility options (at 24 volts) and the option to switch between a temporal 3 pattern and a non-tem- poral continuous pattern. Strobes shall be powered independently of the sounder with the removal of factory-installed jumper wires. The horn on horn/strobe models shall operate on a coded or non- coded power supply (the strobe must be powered continuously). Module - Module shall be a System Sensor Sync-CircuiFM model Listed to UL 464 and shall be approved for fire protec- tive service. The module shall synchronize SpectrAlert@ strobes at 1 Hz and horns at temporal 3. Also, the module shall silence the horns on horn/strobe models. while operating the strobes, over a single pair of wires. The module shall be capable of mounting to a 4-11/16" (119.063 mm) square x 2-1/8" (53.975 mm) deep backbox and shall control two Style Y (Class B) or one Style Z (Class A) circuit. Module shall be capable of multiple zone synchronization by daisy-chaining multiple modules together and resynchronizing each other along the chain. The module shall NOT operate on a coded power supply. SOUND OUTPUT GUIDE UL Reverberant Room dBA @ Volts DC Anechoic Room Peak dBA @ 10 ft./VDC (dBA) 10.5 12 17 20 24 30 10.5 12 17 20 24 30 LOW Ele ctro me chanical NA NA NA 75 75 79 NA NA NA 94 96 98 TONE 3000 Hz Interrupted NA NA NA 75 79 79 NA NA NA 94 96 98 Temporal Electromechanical 75 75 79 82 82 82 94 95 98 100 101 102 HIGH TONE 3000 Hz Interrupted 75 75 79 82 85 85 94 95 98 100 101 102 LOW Electromechanical NA NA NA 79 82 85 NA NA NA 94 96 98 Non. TONE 3000 Hz Interrupted NA NA NA 82 82 85 NA NA NA 94 96 98 Temporal HIGH Electromechanical 79 79 85 85 88 88 94 95 98 100 101 102 TONE 3000 Hz Interrupted 79 82 85 88 88 88 93 95 98 100 101 102 5939soun.tbl NOTES FOR PRODUCT LINE INFORMATION ~ NOTES: 1) Canadian model numbers end in "AU. 2) Latin American model numbers end in 'F". 3) All weatherproof models must use weatherproof backbox model WBB. 4) All SpectrAlert@ products are designed for wall-mount only. 5) Installation of less than 75 candela strobes may be permissible under the equivalent facilitation clause of the ADAAG (Sec. 2.2). However. it is the responsibility of the person or entity deSigning the fire alarm system to determine the acceptability of less than 75 candela strobes. 6) All 15/75 candela strobes or homl strobes are recommended for 20' x 20' (6.096 x 6.096 m) rooms or less. -For a complete listing of SpectrAlert current requirements, please refer to the Current Draw tables on page 4 of this document, or the Instruction Manual. Horn and horn/strobe current draws assume the horn is set at Temp 3, electromechanical tone, and high audibility. Page 2 of4 - DA-46540' 01/12/01