Laserfiche WebLink
<br />Test Specimen Description: <br /> <br />I . <br />. <br />~ <br /> <br />05-30308.01 <br />Page 3 of7 <br /> <br />Weatherstripping; (Continued) <br /> <br />Description Quantity <br /> <br />Location <br /> <br />0.187" backed by 0.250" 3 Rows <br />high pile with center fin <br /> <br />0.187" b~cked by 0.340" tRow <br />high pile with center fin <br /> <br />Top sash stiles <br /> <br />Exterior of bottom sash stiles, <br />and exterior of keeper rail <br /> <br />7/16" diameter, offset, vinyl 1 Row <br />jacket/hollow foam-filled bulb, <br />with semi-rigid exterior leaf <br /> <br />Bottom rail <br /> <br />0.187" backed C-fold 1 Row <br />vinyl jacket/foam-filled leaf <br /> <br />Bottom rail <br /> <br />0.187" backed 0.250" high 1 Row <br />vinyl jacket/foam filled bulb <br /> <br />Head adapter <br /> <br />0.187" backed 0.250" high 2 Rows <br />vinyl jacket/foam filled bulb <br /> <br />Top rail <br /> <br />Frame Construction: The PVC ~ame was constructed using mitered and welded corner <br />construction. A PVC snap-in adapter was located at the head. ' <br /> <br />Sash Construction: The PVC sash were assembled utilizing'mitered and welded corner <br />construction. <br /> <br />Screen Construction: The screen was constructed with extruded aluminum. The corru:rs <br />were square cut and secured using plastic corner keys. The fiberglass mesh ~creen cloth was <br />held-in-place with a flexible vinyl spline. . <br /> <br />Hardware: <br /> <br />Descriotion <br /> <br />Quantity <br /> <br />Location <br /> <br />Metal cam lock and keeper <br /> <br />2 <br /> <br />Lock rail, 8" in. from, each end with <br />adjacent.keepers on the exterior rail <br /> <br />Plastic tilt latch <br /> <br />4 <br /> <br />Top corners of each sash <br /> <br />Metal pivot bar <br /> <br />4 <br /> <br />~ <br />, <br />'. <br />Bottom corners of each sash <br /> <br />Constant force balance system <br /> <br />4 <br /> <br />Two per jamb, three coils per <br />balance <br />