Laserfiche WebLink
<br />PRIV A TE SWIMMING POOLS & SPAS <br />REQUIRED INFORMATION FOR <br />INSPECTIONS & POOL APPLICA nONS <br />424.2 FBC-2001 <br /> <br />On January 1,2002 the Applicant became responsible for conforming to all <br />appropriate sections of 424,2 F.B.C. <br /> <br />Specifically, Building Inspectors will be checking for the three levels of anti- <br />entrapment protection that you are required to provide and issues of safety protection. <br /> <br />1. ANTI-VORTEX COVERS, Mfg, <br />2, LOCKING COVERS on all suction inlets, Mfg. <br />3. TWO MAIN DRAINS separated a minimum of3 <br />4. VENT or VACUUM release device, Mfg. <br />5, SAFETY BARRIERS, Mfg. Model No. <br />6. ALARM SYSTEMS for windows and doors, Mfg. <br /> <br /> <br />ModelNo.~ <br />Model No. W L/ bO ~ <br />eet <br /> <br />Model No. <br /> <br />Model No. <br /> <br />Applicants will be required to provide a layout showing <br />1, The pool with a Complete Plumbing Plan and location of all mechanical equipment, show <br />dimensions, pipe sizes, flow rates, suction and pressures, <br />2, The spa with plumbing plan <br />3, The deck with size, shape and relationship to house <br />4. Location of windows and doors that have access to pool from house <br /> <br />Applicants will be required to provide the following information with the above <br />1. Site specific drawings showing the length, width, depth, shape and means of egress from pool <br />2. Volume Gallons <br />3. Pump Mfg. ~T,lh Model No. BIi-'\~ <br />4, Filter Mfg. .ITA-, Model No. <br />5, Pool Heater Mfg. Model No. <br />6." Main Drains Mfg. Model No. C <br />7, Cleaner Suction Fittmg Mfg. ~ Model No, ~ l/(f) <br /> <br /> <br />Hp. L Turn Over Rate ~ <br />GPM. ilL1..=. <br />Type JtEJr-r ~~. <br /> <br />Applicants will be required to provide CERTIFIED ENGINEERING design to 424.2 <br />Florida Building Code 2001 and ANSI/NSPI-5, 1995:' <br /> <br />* The applicant will provide two copies of all requested information; this information is <br />supplemental to the normal permitting material necessary at intake <br />