|
<br />ELECTRICAL SPECIFICATIONS
<br />
<br />GENERAL
<br />A. PROVIDE ALL LABOR, MATERIALS, EQUIPMENT AND SERVICES NECESSARY FOR
<br />AND INCIDENTAl TO THE COMPLETE INSTALLATION AND OPERATION Of AlL
<br />ELECTRICAL WORK AlL WORK SHALL BE DONE BY QUALIFIED PERSONNEL.
<br />
<br />B. CONFORM TO THE NATIONAl ELECTRICAl CODE 11996 EDiTION>, AND THE NATIONAl
<br />ELECTRICAl SAFETY CODE 1996 EDITIONS. THE INSTAlLATION SHAlL COMPLY WITH
<br />i'PPUCABLE RULES ~ REGULATIONS Of LOCAl AND STATE AUTHORITIES HAVING
<br />JIJRISOIC T ION
<br />C. COORDINATE THE WORK Of AlL TRADES.
<br />
<br />D ARRANGE CONDUIT, WIRiNG, EQUIPMENT, AND OTHER WORK GENERAlLY AS
<br />SHOWN, PROVIDING PROPER CLEARANCES AND ACCESS. CAREFUlL ~ EXAMINE
<br />AlL CONTRACT DRAWINGS AND FIT THE WORK iN EACH LOCATION WITHOUT
<br />SuBSTANTiAl AlTERATION WHERE DEPARTURES ARE PROPOSED BECNJSE OF
<br />FIELD CONDITIONS OR OTHER CAUSES, PREPARE A'iD SUBMIT DETAILED
<br />DRAWINGS FOR ACCEPTANCE, THE RIGHT IS RESERVED TO MAKE REASONABLE
<br />CHANGES IN LOCATION Of EQUIPMENT, CONDUIT, AND WIRING UP TO THE TIME
<br />OF ROUGH-IN OR FABRICATION
<br />THE CONTRACT DRAWINGS ARE GENERALL ~ DIAGRAMMATIC A'iD AlL OfFSETS,
<br />BENDS, FITTINGS AND ACCESSORIES ARE NOT NECESSARilY SHOWN
<br />PROVIDE ALL SUCH ITEMS AS MA~ BE REQUIRED TO FIT THE WORK TO THE
<br />CONDITIONS
<br />F. THERE SHAlL BE NO INTERRUPTION Of POWER TO EXISTING ELECTRICAl
<br />SYSTEMS WITHOUT PRIOR CONSENT OF THE BUILDING OWNER SUCH
<br />INTERRUPTlO'iS SHAlL BE KEPT TO A MINIMUM AND SHAlL BE SCHEDULED
<br />WITH THE OWNER AT LEAST THREE BUSINESS DA~S IN ADVANCE OF THE
<br />OUT AGE ANY COST FOR WORK THAT MUST BE DONE ON AN OVERTIME
<br />BASIS SHAlL BE INCLUDED iN THE BID,
<br />G vISIT THE SITE AND INSPECT THE EXISTiNG CO'iDITIONS BEFORE BID IN
<br />ORDER TO ENSURE PROPER EVAlUATION OF WORKING CONDiTiONS AND
<br />LOCATION OF EXIS TING CONDITIONS
<br />H WHERE OUTLETS ARE REMOVED OR CIRCUITS INTERRUPTED OR BROKEN, PROVIDE
<br />THE REQUIRED RELOCATION, RECONNECTION OR REARRANGEMENT TO RESTORE
<br />SERVICE TO AlL ITEMS, OUTLETS, ETC NOT MADE OBSOLETE BY THIS WORK.
<br />MOUNTING AND SUPPORTING OF AlL EQUIPMENT PROVIDED UNDER THIS SECTION
<br />SHAlL BE COORDINATED WITH THE CONSTRUCTION MANAGER IN THE FIELD
<br />PERMITS AND FEES
<br />A. OBT !\iN, PAY FOR, AND DElIVER AlL PERMITS, CERTIFICATES OF INSPECTION,
<br />ETC., REQUIRED BY THE AUTHORiTIES HAVING JURISDICTION DELIVER
<br />CERTIFICATES TO THE OWNER PRKlR TO FINAl ACCEPTANCE Of THE WORK.
<br />
<br />MATERIAL AND EQUIPME.NT
<br />A_ MATERiAl AND EQUIPMENT INSTAlLED AS A PART Of THE PERMANENT
<br />~tETC,}~lD~!~DS~:iAtLB~ENC~'r~~L~~S AO~~~:mJ~L ~ND~l~b1PNlPrD TESTING LAB,
<br />FOR INSTAlLATION IN EACH PARTICULAR CASE, WHERE STANDARDS
<br />HAVE BEEN ESTABLISHED.
<br />
<br />CUTTING AND PATCHING
<br />A. PROVIDE AlL CUTTING AND PATCHING NECESSARY FOR THE INSTAlLATION OF
<br />THE ELECTRICAL WORK. ANY DAMAGE DONE TO THE WORK AlREADY IN PLACE
<br />BY REASON OF THIS WORK SHAlL BE REPAIRED AT THE CONTRACTOR'S EXPENSE
<br />BY A QUAliFIED MECHANIC EXPERIENCED iN SUCH WORK, PATCHING SHAlL BE
<br />UNIFORM IN APPEARANCE AND SHAlL MATCH THE SURROUNDING SURf ACE. DO
<br />~OT CUT STRUCTURAl MEMBERS WITHOUT APPROVAl BY THE CONSTRuCTION
<br />MANAGER WHERE PENETRATIONS ARE NECESSARY THROUGH THE ROOF,
<br />PROVIDE AlL NECESSAR~ CURBS, SLEEVES, SHIELDS, FLASHING, FITTINGS,
<br />AND CAULKING TO MAKE THE PENETRATIONS ABSOLUTELY WATERTIGHT.
<br />
<br />ELECTRICAl WORK UNDER OTHER DIVISIONS
<br />A oN GENERAl POWER WIRING FOR SYSTEMS ARE INCLUDED UNDER THIS
<br />SPECIFICATION_ CAREFULL ~ REVIEW THE CONTRACT DOCUMENTS AND
<br />COORDINATE THE ELECTRICAl WORK TO BE PERFORMED UNDER THE
<br />OTHER DIVISIONS
<br />
<br />GUARANTEE
<br />A, GUARANTEE THE ELECTRICAl SYSTEM INSTAlLED BY THE CONTRACTOR FREE
<br />FROM AlL MECHA~ICAl AND ELECTRICAl DEFECTS FOR THE PERIOD OF ONE
<br />~EAR BEGINNING FROM THE DAY OF FINAl ACCEPTANCE Of THE WORK OR
<br />BENEFICiAl OCCUPANCY BY THE OWNER, WHICHEVER OCCURS FIRST
<br />B UPON RECEIPT OF NOTICE FROM THE OWNER OF FAILURE OF ANY PART OF THE
<br />ELECTRICAl INSTAlLATION DuRING THE GUARANTEE PERIOD, NEW REPLACEMENT
<br />PARTS SHAlL BE FURNISHED AND INSTAlLED PROMPTLY AT NO COST TO
<br />THE OWNER
<br />
<br />CONDUIT AND FITTINGS
<br />A, MINIMUM CONDUIT SIZE SHALL BE r." (UNLESS OTHERWISE INDICATED)
<br />
<br />B SUPPORT AlL CONDUIT NOT EMBEDDED IN CONCRETE OR MASONRY SO "HAT
<br />STRAIN IS NOT TRANSMITTED TO OUTLET BOXES AND PULL BOXES, ETC
<br />SUPPORTS TO BE SUFFICIENTLY RIGIO TO PREVENT DISTORTION Of CONDUITS
<br />DURING WIRE PUlliNG.
<br />
<br />C. ALUMINUM CONDUIT IS PROHIBITED,
<br />D. AlL CONDUITS SHALL BE ELECTRICAl METAlLIC TUBING IEMT), PVC, OR RIGID
<br />GAlVANIZED STEEL (EXTERIOR EXPOSED)
<br />
<br />E. EMT CONDUIT FITTINGS SHAlL BE FERROUS COMPRESSION TYPE
<br />
<br />F IN DAMP OR WET LOCATIONS USE FLEXIBLE, LIQUID-TIGHT METAl CONDUIT
<br />WITH APPROVED FITTINGS
<br />COORDINATIO'4
<br />
<br />A. COORDINATE THE WORK OF POWER, GROUNDING AND TELCO
<br />AT EQUIPMENT WITH EQUIPMENT SUPPLIER PRIOR TO ROUGH-IN
<br />FINAl TERMINATIONS TO BE AT THE DIRECTION OF THE
<br />EQUIPMENT SUPPLIER
<br />
<br />B PRIOR TO BEGINNING WORK CONTRACTOR SHAlL COORDINATE AlL POWER
<br />~ TELCO WITH THE LOCAl UTILITY COMPA'4Y AS IT MAY i'PPL Y TO THIS
<br />SITE AlL WORK TO COMPL ~ WITH THE RULES AND REGULATIONS OF THE
<br />UTILITIES IN VOL VED.
<br />
<br />WIRES AND CABLES (600 VOLTS)
<br />A. BUILDING WIRE, UNLESS OTHERWISE INDICATED SHAlL BE 600 VOLTS, TYPE
<br />THWN I'4SUlATlON CONDUCTORS SHAlL BE SIZED AND RUN AS INDICATED
<br />CONDUCTORS SHAlL BE SOfT DRAWN COPPER Of NOT LESS THA'4 981.
<br />CONDUCTIVITY
<br />
<br />AlL
<br />
<br />CONDUCTOR INSULATION
<br />
<br />AlL CONDUCTORS SHAlL BE COLOR CODED AS REQUIRED B~ NEC A'40 FURTHER
<br />IDENTIFIED AND CODED AS SPECIFIED HEREIN?fTER COLOR CODING SHAlL BE
<br />B~ MEANS OF COLORED INSULATING MATERiAl, COLORED BRAID OR JACKET
<br />OVER THE INSULATION OR BY MEANS Of SUIT ABLE COLORED, PERMANENT,
<br />NON-AGING, INSULATiNG T i'PE i'PPlIED TO CONDUCTORS AT EACH CABINET
<br />OR JUNCTION POINT THE COLOR CODING SHAlL BE ACCOMPliSHED AS THE
<br />CONDUCTORS ARE INSTAlLED THE FOLLOWING SYSTEMS OF COLOR CODiNG
<br />SHALL BE STRICTLY ADHERED TO
<br />
<br />~ GROUND LEADS' GREEN
<br />B) GROUNDED NEUTRAl LEADS' WHITE
<br />C) 12D/208 VOL T (120/240 VOLT) UNGROUNDED PHASE WIRES:
<br />BLACK, RED, BLUE
<br />
<br />THE COLOR CODE ASSIGNED TO EACH PHASE WIRE SHAlL BE CONSISTENTLY
<br />FOLLOWED THROUGHOUT
<br />
<br />CONDUIT SUPPORTS
<br />
<br />A_ SUPPORT SURF ACE RUNS OF CONDUIT USING ONE OR TWO HOLE PIPE STRi'PS
<br />STRAP SPACING 6 FOOT ON CENTERS, MAXIMUM, UNLESS NOTED OTHERWISE.
<br />
<br />B. FASTEN STRi'PS TO CONCRETE USING INSERTS OR EXPANSION BOLTS AND TO
<br />HOLLOW MASONRY USING TOGGLE BOLTS WOODEN PLUGS ARE UNACCEPTABLE.
<br />
<br />OUTLET, JUNCTION AND PULL BOXES
<br />
<br />A. AlL BOXES, WHETHER OUTLET, JUNCTION, PULL, OR EQ(JIPMENT SHAlL BE
<br />FURNISHED WITH APPROPRIATE COVERS.
<br />
<br />13. NO SECTIONAlIZED BOXES SHAlL BE USED.
<br />
<br />C. OUTLET, JUNCTION AND PULL BOXES SHAlL BE SHEET STEEL WHERE REQUIRED
<br />TO F AC III T ATE PULLING Of WIRES OR CABLES, SUCH BOXES SHAlL BE RIGIDLY
<br />MOUNTED AND INSTALLED IN ACCESSIBLE LOCATIONS
<br />
<br />SEE DRAWINC NOTE OF SAME NUM8ER
<br />8, M KILOWATTHOUR METER
<br />6' CONDUIT OR CABLE-UP, DOWN
<br />__ --... "? U'i.'b~R~i:6~Ni?lID, T1""'ED COPPER CONDUCTOR
<br />......-------.. #',/ AWG BARE, SOLID, TINNED COPPER CONDVCTOR ROVTlNG
<br />AS SHOWN ON DWG'S
<br />~ CONDUIT TERMINATED OR TRANSiTION AS INDICATED IN PLAN
<br />--il. STANDARD GROUND ROO -Y,"xl0'-0"
<br />, - E - - UNDERGROUND CONDUIT, POWER
<br />- - T - - UNDERGROUND CONDUIT, TElCO
<br />[DJ OJ FUSED SERVICE DISCONNECT SWITCH, NON-FUSED
<br />. EXOTHERMIC WELD OR MECHANICAl GROUND BOND
<br />
<br />A.
<br />
<br />IDENTIFICATION Of EQUIPMENT
<br />A MARK AND PERMANENTLY IDENTIFY AlL ELECTRICAl EQUIPMENT IDENTIFICATION
<br />SHAlL BE LAMINATED PLASTIC PLATES, BLACK WITH WHITE ENGRAVED LETTERS USE
<br />'/~" HIGH LETTERING, ATTACH PLATES WITH CHROME PLATED OR 316 STAINLESS STEEL
<br />SCREWS TO THE DEVICE USE NOMENCLATURE ON DRAWINGS
<br />13. AlL EQUIPMENT SHALL BE MARKED WITH WARNING LABELS AND SIGNAGE AS REQUIRED
<br />BY THE NATIONAl ELECTRIC CODE AND OTHER APPliCABLE STANDARDS
<br />
<br />ELECTRICAL LEGEND
<br />
<br />SAFETY DISCONNECT SWITCH
<br />
<br />A. PROVIDE S?fETY DISCONNECT SWITCHES AS SHOWN ON THE DRAWINGS AND WHERE
<br />REQUIRED B~ THE NATIONAl ELECTRICAl CODE. SWITCHES SHALL BE HORSEPOWER-RATED
<br />WHERE i'PPlICABlE, AND SHAlL BE THE SIZES REQUIRED SERVICE ENTRA'4CE SWITCH
<br />SHAlL BE SO RATED,
<br />
<br />B SWiTCHES SHAlL BE HEAVY DUTY TYPE FUSED OR UNFUSED, AS iNDICATED: SIDE HANDLE
<br />OPERATED, 'lEMA 1 FOR GENERAl INTERIOR WORK AND 'lEMA 3R STEEL
<br />FOR EXTERIOR, DAMP, OR WET LOCATIONS. SWITCHES SHAlL BE EQUIPPED WITH A
<br />COVER INTERLOCK TO PREVENT OPERATION WITH COVER OPEN.
<br />
<br />C SWITCHES SHAlL BE VISIBLE BLADE. EXTERNAlL Y OPERATED, WITH All CURRENT CARRYING
<br />PARTS SILVER OR TIN-PLATED, AlL SWITCHES SHAlL HAVE PROVISIONS FOR NOT LESS THAN
<br />TH.AN TWO EXTERNAl PADLOCK
<br />
<br />-0-
<br />-t-
<br />
<br />INSPECTiON SLEEVE
<br />
<br />GROUND ROO EXOTHERMiCN.L Y WElDED TO
<br />BURIED GROUND RING
<br />
<br />ELECTRICAL LOAD SUMMARY - NEXTEL
<br />EXISTING 1201240V-SINGlE PHASE-3W 200 AMPERE SERVICE
<br />22,000 A<C.
<br />lOA<D DESCRIPTION IS..U
<br />
<br />LICHTING
<br />
<br />RECEP T AClES
<br />
<br />A<R CONDITlONINC
<br />
<br />COMMUNICATION EQUIPMENT
<br />
<br />FANS
<br />
<br />TOT N. CONNECTED lOAD
<br />
<br />. VERIFY A<C - OBTAJN AVA<LABLE FAULT CURRENT IAFC) FOR
<br />ElECTRIC UTILITY A<C MUST EXCEED AFC 0 POINT OF SERVICE
<br />
<br />GROUNDING
<br />
<br />A. ~~2~:S;ENGrLOyUN3,t ~~F fCLT I~~f~ WI~ Y 1Cg~~18~ct'4~1 ?HT I~t ~0~~M[SvrMOEFN T
<br />
<br />THE '4ATIONAl ELECTRICAl CODE AND AS HEREINAFTER SPECIFIED AlL
<br />GROUNOED NEUTRAl CONDUCTORS SHAlL BE CONTINUOUSLY IDENTIFIED. AlL
<br />CROUNDING AND BONDING CONNECTIONS SHALL BE SOlDERLESS,
<br />
<br />B PROVIDE iNSULATED GROUNDING CONDUCTORS FOR FEEDER I-NO BRANCH CIRCUIT
<br />WIRING AS CAlLED FOR ON THE PLANS. PROVIDE GROUNDING BLOCKS,
<br />TERMINAlS, ETC ,FOR CONNECTION OF GROUND WIRE IN AlL DISTRIBUTION
<br />EQUIPMENT, OUTLETS, JUNCTiON BOXES, AND UTILIZATION EOUIPMENT TERMINATE
<br />WITH LUGS OR COMPRESSION TERMiNAlS. CONDUCTORS LOOPED UNDER BOLTS OR
<br />SCREWS Will NOT BE ACCEPT ABLE.
<br />
<br />C GROUNO ROOS WHEN NEEDED SHAlL BE STEEL, COPPER CLAD 'Ie" DIAMETER BY
<br />TEN FEET LONG GROUND ROD SHIELDS TO BE PROVIDED FOR DRIVING RODS.
<br />
<br />D PRIOR TO INSTAlLATION OF THE GROUNOING S~STEM, THE EARTH RESISTIVITY
<br />SHAlL BE MEASURED USING WENNER FOUR TERMINAl METHOD REPORTS OF THE
<br />MEASURED RESISTIVITY MUST BE SUBMITTED TO THE CONSTRUCTION MA'iAGER
<br />
<br />E. THE MAXIMUM RESISTANCE OF THE COMPLETED GROUNDING S~STEM SHALL NOT
<br />EXCEED 5 OHMS ON ANY PART Of THE SYSTEM, IF DUE TO SOil CONDITIONS
<br />OR OTHER PARAMETERS THIS MAXIMUM VALUE IS EXCEEDED, CONTACT THE
<br />ENGINEER FOR ADOITIONAl INSTRUCTIONS
<br />
<br />10 KVA
<br />16 KVA
<br />120 KVA
<br />250 KVA
<br />037 KVA
<br />3997 KVA
<br />
<br />CALCULATED TOTAL DEMAND
<br />DEMAND 18 KW NEXTEL (BASED ON SIMILAR SITES)
<br />88 A<MPS 0 0 B5 Pf,240V . 441
<br />
<br />F. GROUND BAR PLATES ARE TO BE MANUFACTURED EXACTL~ AS DETAILED AND
<br />DIMENSIONED DIMENSIONS TO BE ACCURATE TO ioS2"
<br />G. AlL MOUNTING HARDWARE SHAlL BE STAINLESS STEEL
<br />H, AlL BARE COPPER SURFACES SHALL BE COATED PRIOR TO LUGGING. JOINT
<br />COMPOUND SHAlL BE KOPR-SHIELD BY THOMAS I< BETTS
<br />I. CONNECTION OF CONDUCTORS BELOW GRADE TO GROUND RODS. GROUND
<br />RINGS, GROUND WELL, ETC ,SHAlL BE EXOTHERMIC TYPE WELDiNG CONNECTIONS
<br />"CADWELD"
<br />J CONNECTION OF CONDUCTORS ABOVE GRADE TO METAlliC OBJECTS OR IN
<br />HANDHOLES SHAlL BE WITH PRESSURE T~PE CRIMP CONNECTORS, BOl TED
<br />CLAMPS, OR SPLIT BOLT CONNECTIONS WITH SOLiD BRONZE H!>RDWARE, CADMIUM
<br />PLATED STEEL HARDWARE is NOT ACCEPTABLE CONNECTIONS TO INTERIOR HAlO
<br />GROUND RING SHAlL BE WITH 'C' CLAMPS. SOLID TO SOliD AND STRANDED
<br />CONOUCTORS REQUIRES TWO (2) CLAMPS AlL 'C' CLAMPS REQUIRE INSTAlLATION
<br />WITH THE CORRECT HYDRAULIC CLAMP TOOL
<br />
<br />ABBREVIATIONS &
<br />SYMBOLS
<br />A - AMPERE
<br />AFF - ABOVE FINISHED FLOOR
<br />AFG ,ABOVE FINISHED GRADE
<br />AFR - ABOVE FINISHED ROOf
<br />ACB - ANTENNA GROUND BAR
<br />A<HU - A<R HANDlINO UNIT
<br />A<C - AMPERES INTERRvPTING
<br />AWG - EYER,{jE~ WIRE GA(X;E
<br />BKR, C8 - CIRCUIT BREAAER
<br />CAT - CATALOG
<br />C, CONDo - CONDUT
<br />CK T - CIRCUIT
<br />DWO - DRAWING
<br />EMT - ElECTRICAl METAllC TU81NO
<br />FSS - FUSED SAFETY SWITCH
<br />GFI - GROUND F AVLT INTERRUPTING
<br />GRO - GROUND
<br />KVA - KIlOVOL T-A<MPERES
<br />MC8 - MAJN CIRCUT BREAAER
<br />MGB - MA<N GROUND BAR
<br />M.H - MOUNTING HEIGHT
<br />lolL 0 - MAJN LUG ONLY
<br />NEC - NATIONN. ElECTRICAL CODE
<br />NEMA 'NATlONN. ElECTRICAl
<br />MANUF ACTURERS ASSOCIATION
<br />NETA - NATIONAl ElECTRICAl TESTING
<br />ASSOCIA TlON
<br />NFSS - NON-FUSED SAFETY SWITCH
<br />NIC - NOT IN CONTRACT
<br />NO. - NUMBER
<br />OCP - OVER CURRENT PRO,ECTlON
<br />P - POLE
<br />PVC - POL YVINn CHL ORIDE
<br />ReS 'RIGID GAlVANIZED STEEl
<br />SPST - SINGLE POLE, SINGLE THROW
<br />TYP - TYPICN.
<br />V - VOlTS
<br />WP - WEATHERPROOF
<br />'1l - PHASE
<br />
<br />SUPPORTS, HANGERS A'iD FOUNDATIONS
<br />
<br />A_ PROVIDE AlL SUPPORTS, HA'iGERS, BRACES, ATT ACHME'4TS, AND FOUNDATIONS
<br />REQUIRED FOR THE WORK SUPPORT AND SET THE WORK IN A THOROUGrlL ~
<br />SUBST ANTIAl AND WORKMANLIKE MANNER WITHOUT PLACINC STRAINS ON THE
<br />MATERiAlS, EQUIPMENT, OR THE BUILDING STRUCTURE
<br />
<br />B SUPPORTS, HANGERS, BRACES AND ATT ACHMENTS SHAlL BE ST A'4DARD
<br />M,ANUF ACTURED ITEMS OR FABRICATED STRUCTURAl STEEL SHAPES.
<br />
<br />AS-BUILT DATA
<br />
<br />A, CONTRACTOR SHAlL PREPARE AND SUBMIT TO THE CO'4STRUCTION MANAGER
<br />"AS-BUlL T" DRAWiNCS FOR CHA'iGES OR DEVIATIONS FROM CONTRACT DRAWINGS
<br />TO THE FOLLOWING'
<br />
<br />1. SOURCE, ORIGIN, AND/OR ROUTING OF MAlN FEEDERS
<br />
<br />2. LOCATION OF MAJOR PIECES OF DISTRIBUTION EQUIPMENT
<br />SUCH AS KllOWATTHOUR METER AND MNN FEEDER
<br />OVERCURRENT DEVICES
<br />
<br />
<br />NEXTEL CORPORATION
<br />4710 EISE.....llOWER BLVD.
<br />BLDG, D-1
<br />TAM.PA. FWRIDA 33634
<br />(813) 806-4000
<br />
<br />BIRD LAKE
<br />SITE No, FL-3412-B
<br />
<br />I DATE'DECEMBER 13,2005
<br />
<br />REVISIONS
<br />NO. DATE
<br />1 ISSUED FOR CONSTRUCTION
<br />
<br />2
<br />
<br />3
<br />
<br />4
<br />
<br />5
<br />6
<br />
<br />~
<br />.
<br />A
<br />A
<br />A
<br />-..-
<br />
<br />KC]
<br />
<br />ISITE NAME
<br />
<br />BIRD LAKE
<br />
<br />I SHE NUMBER
<br />
<br />FL-3412-B
<br />
<br />I SITE ADDRESS
<br />
<br />38122 HENRY DRIVE
<br />ZEPHYRHILLS, FLORIDA 335~
<br />(PASCO COUNTY)
<br />
<br />~~T TITLE '
<br />
<br />
<br />LECTRICAL SPECIFICATIO
<br />
<br />rv\i~\ b'J E-'
<br />
<br />10054100AB
<br />
|