Laserfiche WebLink
<br />Premdor Exterior Door Products <br /> <br />NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED <br />(For File ONLY, Not part of NO A) <br /> <br />A. DRAWINGS <br />1. Manufacturer's die drawings and sections. <br />2. Drawing No. 8-2202, titled "Exterior Door Product Single & Doubl Outswing 6'8 <br />Glazed Fiberglass Door", sheets 1 through 8, prepared by RW Building <br />Consultants, Inc., dated 1/17/02. <br /> <br />B. TESTS <br />1. Test reports on 1) Air Infiltration Test, per FBC, T AS 202-94 <br />2) Uniform Static Air Pressure Test, Loading per FBC TAS 202-94 <br />3) Water Resistance Test, per FBC, TAS 202-94 <br />4) Forced Entry Test, per FBC 3603.2 (b) and TAS 202-94 <br />along with marked-up drawings and installation diagram of a fiberglass <br />outswinglinswing glazed double door, prepared by Certified Testing Laboratories, <br />Test Report No. CTLA805W-2, dated 2/3/02, signed and sealed by Ramesh <br />Patel, P ,E. <br /> <br />C. CALCULATIONS <br />1. Anchor Calculations and structural analysis, prepared by Lyndon Schmidt, P.E., <br />dated 3/12/02, signed and sealed by Lyndon Schmidt, P.E. <br /> <br />D. MATERIAL CERTIFICATIONS <br />1. Notice of Acceptance No. 01-0718.08 issued to ODL, Inc. for "HP Polypropylene <br />Doorlight Assembly" dated 1/17/02, expiring on 1/17/06. <br />2. Test Report No. ETC-00-577-10 148.0; prepared by ETC Laboratories, issued to <br />RSL, Inc" dated 12/15/01, for Extruded PVC, tested per ASTM D 635- <br />91"Standard Test Method for Rate of Burning and Time of Burning of Self- <br />Supporting Plastics in a Horizontal Position"; ASTM D 2843-93 "Standard Test <br />Method for Density of Smoke from the Burning or Decomposition of Plastics"; <br />ASTM D790-96 "Standard Test Methods for Flexural Properties of Unrein forced <br />and reinforced Plastics and Electrical Insulating Materials, signed and sealed by <br />Joseph L. Doldan, P.E. <br />3. Test Report No. ETC-01-756-10828.0, prepared by ETC Laboratories, issued to <br />Trinity Glass International, dated 5/22/01, for non-foam lupoy, tested per ASTM <br />D 635 -96"Standard Test Method for Rate of Burning and Time of Burning of <br />Self-Supporting Plastics in a Horizontal Position"; ASTM D 2843-93 "Standard <br />Test Method for Density of Smoke from the Burning or Decomposition of <br />Plastics"; ASTM D1929-96 "Standard Test Methods for Ignition Properties of <br />Plastics, ASTM D 638 -96"Standard Test Method for Ten' roperties of <br />Plastics" signed and sealed by Joseph L. Doldan, P.E. <br /> <br /> <br />an, P.E., Deputy Director <br />Product Control Division <br />NOA No 02-0418.03 <br />Expiration Date: December 26, 2007 <br />Approval Date: December 26, 2002 <br /> <br />E -1 <br />