Laserfiche WebLink
<br />-- .....~" <br /> <br />. \ . <br />~ <br /> <br />..~ <br /> <br /> <br />For custom transition flashing specify the pitches of the two roof slopes and, if <br />required, specify dimensions "a" and b" <br /> <br />The transition flashing provides a continuous drainage where two slopes meet. <br /> <br /> <br />The Ridge Cap is used to seal the point at which two upward slopes meet. This <br />can be both along the ridge of the roof as well as a covering for a hip. Either <br />wood-grip or setf-drilling lap TEK screws are applied through the ribs of the metal <br />roofing panels, <br /> <br />Debris, insects, prevailing rain can find easy access under the ridge cap, so <br />closures are often used to either totally or partially seal the opening. Closures <br />under ridge caps are available in 3 types: solid, vented, and hip valley type. <br /> <br />See Diagram Drawings attached to this guide. <br />