|
<br />sJ/8. G.WB. EACH SIDE
<br />
<br />O[
<br />~
<br />r-
<br />I
<br />....
<br />
<br /><i) NON-RATED
<br />A 3 5/8" METAL STUDS (20 GA.) @ 16" a.c.
<br />TO +8'-0" AJJ.
<br />W/ 5/8" GWB. ON BOTH SIDES
<br />W/ 5/8" GWB. TOP CAP.
<br />
<br />NOTE:
<br />
<br />v20 $A. 3-5/8" STEEL
<br />STUDS @ 16" O.C.
<br />
<br />GENERAL:
<br />-REPLACE ALL BURNED OUT LAMPS AND BALLASTS.
<br />-REMOVE ALL EXISTING VINYL BASE. PREPARE FOR NEW.
<br />-REPLACE ALL STAINED OR DAMAGED CEILING TILES.
<br />-CLEAN ALL HYAC DIFFUSERS.
<br />-REPAIR OR REPLACE ALL DAMAGED OR INOPERABLE EXISTING EXIT SIGNS AND
<br />EMERGENCY LIGHTING, AS REQUIRED.
<br />-RELOCATE ALARM SENSORS, CONTROLS, SECURITY CAMERAS, ETC, AS
<br />REQUIRED/DIRECTED BY PROJECT MANAGER.
<br />-REPAIR OR REPLACE ALL DAMAGED SPRINKLER ESCUTCHEONS, IF APPLICABLE.
<br />-CLEAN ALL EXISTING STOREFRONT GLASS AND FRAMING.
<br />
<br />ALL DRYWALL JOINTS SHALL BE TAPED 'MTH A MINIMUM OF TWO COATS JOINT
<br />COMPOUND. ALL COMPOUND JOINTS ARE TO BE WET-SANDED ONL Y1
<br />ALL DIMENSIONS ARE FINISH TO FINISH. .
<br />
<br />
<br />WALL TYPES
<br />SCALE: NOT TO SCALE
<br />
<br />RECEIVING AREA:
<br />-INSTALL NEW/RELOCATE EXISTING PALLET RACKING AND OS SHELYING AS SHOWN.
<br />
<br />I-
<br />L-
<br />
<br />FLO
<br />
<br />
<br />R PLAN
<br />
<br />SCALE: 1/8"="-0"
<br />I ,/ REFERENCED NORTH
<br />O~I 81 161
<br />
<br />32 FEET1 ~
<br />
<br />
<br />CD
<br />
<br />5
<br />u...
<br />
<br />0...
<br />::)
<br />
<br />:;0
<br />o
<br />r
<br />r
<br />Ii
<br />c:
<br />",
<br />o
<br />O.
<br />o
<br />:;0
<br />
<br />~
<br />
<br />RECEIVING
<br />AREA
<br />(EXISTING)
<br />
<br />0::
<br />W
<br />(;j
<br />>
<br />Z
<br />o
<br />()
<br />
<br />cr
<br />w
<br />W
<br />~
<br />
<br />
<br />FMPLOYEE
<br />BREAKROOM []
<br />. (EXISTIN G)
<br />
<br />LOCKERS CJ
<br />I
<br />
<br />C.P.U.
<br />
<br />.
<br />
<br />.
<br />
<br /><;~
<br />
<br />EJ?
<br />
<br />L
<br />
<br />~
<br />
<br />RETAIL:
<br />-INSTALL NEW COOLERS/FREEZERS AS SHOWN.
<br />-INSTALL NEW OUTLETS AT NEW COOLERS/FREEZERS AS SHOWN.
<br />-INSTALL NEW END PANELS AND DUMMY BOXES AS SHOWN.
<br />-INSTALL NEW CLM/FLM COOLERS AS SHOWN.
<br />-INSTALL NEW OUTLETS FOR NEW CLM/FLM COOLERS AS SHOWN.
<br />-PA TCH AND PAINT EXISTING RETAIL AREA WALLS, INCLUDING EXISTING
<br />WALL PAPER, BLUE ACCENTS AND TRIM, AND ALL AREAS EXPOSED
<br />AFTER FIXTURING.
<br />-REPLACE ALL EXISTING BLUE YCT TILES, REMAINING EXPOSED AFTER
<br />CARPETTING, 'MTH RECLAIMED WHITE TILES.
<br />-CLEAN AND POLISH EXISTING VCT TO REMAIN EXPOSED AFTER CARPETING
<br />A T EXISTING COOLER/FREEZER, LIFE AISLE, AND BEAUTY CONSULTATION
<br />CENTER LOCA 110NS AS SHOWN.
<br />-INSTALL NEW BEAUTY CARPET AS SHOWN.
<br />-INSTALL NEW RETAIL CARPET TILES.
<br />
<br />111'-0" (RETAIL) (V.IJ.)
<br />
<br />-INSTALL NEW PRICE CHECKERS AS SHOWN.
<br />-INSTALL NEW/RELOCATE EXISTING GREETING CARD AISLE MARKERS AS REQ'D.
<br />-INSTALL NEW 2 X 4 LIGHT FIXTURE AT NEW BEAUTY ARCH AS SHOWN.
<br />-INSTALL NEW BEAUTY CONSULT A 11 ON CENTER AS SHOWN.
<br />-INST ALL NEW KICKPLA TE OUTLETS ON SIDEWALLS AS SHOWN.
<br />-INSTALL NEW OUTLETS FOR BEAUTY FIXTURES AS SHOWN.
<br />-INSTALL NEW POWER POLES AT BEAUTY FIXTURES AS SHOWN.
<br />-INSTALL (3) NEW SEASONAL OUTLETS AS SHOWN.
<br />-INSTALL NEW HANGING AISLE MARKERS AS SHOWN.
<br />-RELOCATE EXISTING ALARM KEY PAD TO NEW S.O.A. AS SHOWN.
<br />-PAINT EXISTING BLUE ACT CEILING GRID WHITE, IF APPLICABLE.
<br />-INSTALL NEW HANGING GRAPHIC PANELS AS SHOWN.
<br />-INSTALL NEW LIGHTED FIXTURE HEADERS.
<br />-INSTALL NEW OUTLETS FOR LIGHTED HEADERS.
<br />-INSTALL NEW FRAGRANCE CALL BUTTON AS SHOWN.
<br />-INSTALL NEW 4" VINYL BASE AFTER FIXTURING.
<br />-INSTALL NEW SIDEWALL FIXTURE STRAPPING AS REQUIRED.
<br />
<br />NEW FLM
<br />
<br />
<br />RETAIL AREA
<br />(MODIFIED )
<br />
<br />
<br />
<br />SEE SHEET 1/A-1 FOR
<br />WALL TYPES
<br />
<br />SEE SHEET A- 4 FOR
<br />FINISH PLAN
<br />
<br />~
<br />@ E&
<br />~
<br />
<br />PHARMACY AND WAITING AREA:
<br />
<br />-REUSE EXISTING WAITING SEATS AT WAITING AREA AS SHOWN.
<br />-INSTALL NEW LAMINATE BELOW NEW CHAIR RAIL AT WAITING AREA AS SHOWN.
<br />-PATCH AND PAINT EXISTING WALL AND/OR WALL PAPER ABOVE NEW CHAIR RAIL
<br />AT WAJTlNG AREA.
<br />-INSTALL NEW CHAIR RAIL AT WAJTlNG AREA AS SHOWN.
<br />-INSTALL NEW CLM COOLER NEAR WAITING AREA.
<br />-INSTALL NEW OUTLET AT WAITING AREA FOR NEW CLM COOLER, IF NONE EXISTS.
<br />-RELAMINA TE EXISTING PHARMACY COUNTER FRONT FACES.
<br />-INSTALL NEW PARAWASH LIGHT FIXTURES AS SHOWN,
<br />-INSTALL NEW PHARMACY HANGING GRAPHIC PANELS AS SHOWN.
<br />-PATCH AND PAINT EXISTING PHARMACY YALANCE.
<br />
<br />103'-t (RETAIL) (V.l.F.)
<br />
<br />:t 140'-0" (OVERALL) (V.IJ.)
<br />
<br />
<br />STORE SETUP NOTES/AS-IS
<br />GENERAL CONTRACTOR RESPONSIBILITY
<br />
<br />1) HANG AISLE MARKER SIGNS AND GREETING CARD SIGN (SUPPLIED BY TENANT).
<br />2) INSTALL BULKHEAD PANELS, DUMMY COlUMNS, END PANELS AT GONDOLAS, WALL UNITS
<br />(INCLUDING TOP RAIL CLIPS ON EXIS11NG WALL UNITS ABOVE 60" AND
<br />WOOD STRAPPING ON NEW WALL UNITS) AS PER DWG. F -1.
<br />3) INSTALL DOOR HARDWARE (SUPPLIED BY TENANT), SEE DOOR SCHEDULE ON DWG. A-2
<br />4) MOUNT FIRE EXTINGUISHERS @ 4'-6" AJJ. (SUPPLIED BY G.C.).
<br />5) ASSEMBLE & INSTALL STOCK ROOM SHELYING, MISC. FIXT. & PALLET RACKING
<br />ALSO SECURITY CAGE IF NEW ONE IS REQUIRED.
<br />6) ALL WORK PERFORMED IN ACCORDANCE w/ ALL LOCAL & STATE BUILDING CODES,
<br />7) GENERAL CONTRACTOR RESPONSIBLE TO UNLOAD ALL DELIVERIES TO JOB SITE &
<br />REMOVAL OF ALL DEBRIS CAUSED BY THEIR WORK.
<br />
<br />ALL DIMENSIONS ARE FINISH TO FINISH
<br />
<br />1----
<br />
<br />INSTALL NEW FINISHED
<br />CHASEWA Y TO ABOVE
<br />EXISTING CEILING
<br />
<br />
<br />f-
<br />(j)
<br />w
<br />Z
<br />f-
<br />a::
<br /><{
<br /><.)
<br />
<br />--
<br />o
<br />
<br />1
<br />Co
<br />~
<br />
<br />o
<br />
<br />EXISTING EAS
<br />PEDESTALS
<br />
<br />
<br />NEW "l-HOUR
<br />PHOTO" HANGING
<br />SIGN. SEE
<br />DETAIL 4/E-3.
<br />
<br />NEW FLM
<br /> NEW "GREETING
<br />CHECKOUT (/) 'G' ~ CARDS" HANGING
<br /> -0 u..; ~
<br />(NEW) Cl: :z: 0 ~ u..; SIGN. SEE
<br />:::> >=
<br />f- ~ (/) ~ DETAIL 4/E-3.
<br /> x x ~
<br /> c;: ~ ~
<br /> f- ~ 3
<br /> :::> B (/) w <(
<br /> 0 W 0:: 0::
<br /> :.:: 0:: '-' ~
<br /> u ~ 0
<br /> w S
<br /> :r: 0 0 x co
<br /> U c;: 1
<br /> u... :r: Co 'b
<br /> 0 <..:l r- I
<br /> u.: I 0
<br /> co
<br /> -.J D; ~
<br /> 0
<br /> '"
<br /> l.1...
<br /> D~ MACHINES
<br /> VENDING
<br /> EXISTING
<br />
<br />
<br />~~ [
<br />Gl
<br />V>
<br />,.,
<br />>
<br />!i
<br />-o~ .~
<br />"'r- D .1
<br />'0""'
<br /> 00
<br /> PAY PHONES
<br />-o~ EXISTING
<br />~~ D
<br />
<br />INSTALL NEW FINISHED
<br />CHASEWA Y TO ABOVE
<br />EXISTING CEILING
<br />
<br />PHOTO LAB:
<br />-PATCH AND PAINT EXISTING WALLS AS REQUIRED.
<br />-INSTALL NEW PHOTO LAB, COMPLETE, AS SHOWN.
<br />-RELOCATE EXISTING FILM PROCESSOR AND UTILITIES AS SHOWN.
<br />-INSTALL NEW/RELOCATE EXISTING UTILITIES AS REQUIRED.
<br />-iNSTALL NEW POWER POLE(S) AS SHOWN.
<br />-CLEAN AND POLISH EXISTING VCT.
<br />-INSTALL NEW VINYL BASE AS REQUIRED.
<br />-INSTALL NEW OUTLET FOR NEW "I-HOUR PHOTO" SIGN, IF NONE EXISTS.
<br />-INSTALL NEW HANGING "I-HOUR PHOTO" SIGN AS SHOWN.
<br />-INSTALL NEW PARAWASH LIGHT FIXTURES AS SHOWN.
<br />-INSTALL NEW HANGING PHOTO LAB GRAPHIC PANELS AS SHOWN.
<br />-EXTEND EXISTING l/t COLD WATER LINE TO NEW SINK AS SHOWN.
<br />-RELOCA TE EXISTING WATER HEATER AND ELECTRICAL CONNEC110N TO
<br />NEW PHOTOLAB AS SHOWN.
<br />-INSTALL NEW SINK PUMP UNIT AT NEW SINK. EXTEND TO EXISTING
<br />OVERHEAD SANITARY LINE, OR INSTALL NEW'" OVERHEAD SANITARY LINE
<br />AND INDIRECT WASTE AT EXISTING JANITORS SINK IN RECEIVING AREA.
<br />ALL PIPING TO BE CONCEALED.
<br />-INST ALL NEW PHOTO LAB SINK. CONNECT TO EXISTING PLUMBING.
<br />-INST ALL NEW FINISHED CHASEWA Y TO ABOVE EXISTING CEILING.
<br />
<br />LEGEND:
<br />@
<br />
<br />ill
<br />
<br />INTERIOR FINISH DESIGNA 110N-SEE
<br />FINISHES LEGEND, DWG. NO. A-2.
<br />
<br />DOOR DESIGNA 110N, SEE DOOR
<br />SCHEDULE ON DWG. A-2.
<br />LOW STUD PARTITION
<br />NEW STUD PARllTlON (TO +96" AJJ.)
<br />
<br />EXISTING PARTIl10N TO REMAIN
<br />
<br />CD FIRE EXTINGUISHER
<br />
<br />MANAGERS OFFICE:
<br />
<br />-RELOCA TE EXISTING CCTV MONITORS AS DIRECTED BY PROJECT MANAGER.
<br />-RELOCA TE EXISTING SAFE AS DIRECTED BY PROJECT MANAGER.
<br />-RELOCA TE EXIS11NG ALARM KEYPAD AS SHOWN.
<br />-INSTALL NEW YINYL BASE.
<br />-INSTALL NEW CARPET AS SHOWN.
<br />- APPL Y NEW WALL COVERING AS SHOWN.
<br />-INSTALL NEW/RELOCATE EXISTING COUNTERS AND SHELYING AS
<br />DIRECTED BY PROJECT MANAGER.
<br />-INSTALL NEW UTILITY CHASE IN CORNER AS SHOWN.
<br />-INSTALL NEW/RELOCATE EXISTING UTILITIES AS REQUIRED.
<br />-INSTALL NEW DOOR, FRAME, AND HARDWARE.
<br />-CONSTRUCT NEW OFFICE WALLS AS SHOWN.
<br />
<br />CHECKOUT:
<br />
<br />-INSTALL NEW "GREETING CARD" HANGING NEON SIGNS AS SHOWN.
<br />-INSTALL NEW GATE AS SHOWN.
<br />-INSTALL NEW PARAWASH LIGHT FIXTURES AS SHOWN.
<br />-INSTALL NEW HANGING GRAPHICS PANELS.
<br />-INSTALL NEW YINYL BASE.
<br />-INSTALL NEW CUSHION-BACKED CARPET AT CHECKOUT AS SHOWN.
<br />-INSTALL NEW 20'-4" BAGWELL CHECKOUT COUNTER AND ALL ASSOCIATED
<br />MILLWORK. INSTALL NEW/RELOCATE EXISTING ELECTRICAL AND DATA LINES
<br />AS REQUIRED.
<br />- TRENCH AS REQUIRED TO INSTALL NEW /RELOCA TE EXISTING UTILITIES.
<br />REMOVE OLD UTILITY STUB AND PATCH f'LOOR, IF REQUIRED.
<br />-INSTALL NEW/RELOCATE EXISTING UTILITIES AS REQUIRED.
<br />-PATCH AND PAINT EXISTING WALLS AS REQUIRED.
<br />
<br />
<br />DES I
<br />GRG
<br />
<br />~~~
<br />
<br />AOR: ROBERT J. GEHR, A.I.A., NCARB
<br />STATE OF FLORIDA SEAL #AR0092168
<br />LARSON DESIGN GROUP, INC.
<br />1000 COMMERCE PARK DR.
<br />SUITE 201
<br />WILLlAMSPORT, PA 17701
<br />TEL (570) 323-6603
<br />FAX (570) 323-9902
<br />
<br />CONSUL TANT:
<br />
<br />Plans, maps, specifications, studies,
<br />and reports not containing, a red
<br />ink seal imprint accompanied by an
<br />original signature by the licensed
<br />orofessional may have been
<br />traudulently altered and shall not
<br />be considered an original copy. All
<br />information should be disregarded
<br />unless verified by the professional
<br />whose signature appears above.
<br />Copyright Protected 200.3,
<br />Larson Design Group, Inc.
<br />
<br />
<br />pharmacy
<br />STORE NUMBER: 0651
<br />
<br />37943 EILAND BLVD
<br />ZEPHYRHILLS, FL 33541
<br />PROJECT TYPE:
<br />00048 ACQUISITION(#0115)
<br />
<br />
<br />REVISIONS:
<br />
<br />STORE SET-UP MANAGER:
<br />LAYOUT COORD.:
<br />PROJECT ARCHITECT:
<br />PLANNING MGR:
<br />DRAWING BY:
<br />
<br />RJG
<br />
<br />CS
<br />
<br />SAB AJM ABB RLW
<br />
<br />DRAWING SCALE
<br />TITLE:
<br />
<br />AS SHOWN
<br />
<br />FLOOR PLAN
<br />
<br />SHEET NUMBER:
<br />
<br />A-1
<br />
<br />OUTLINE : -
<br />REVIEW:
<br />FINAL: 9/1/04
<br />REVISION
<br />
<br />IPERMITI
<br />
|