Laserfiche WebLink
<br />PART 1 - GENERAL <br /> <br />1.1 <br />A. <br /> <br />SUMMARY <br />Related Documents: Provisions established within General and Supplementary Conditions of <br />the Contract, Division 1 - General Requirements, and the Drawings are collectively applicable <br />to this Section. <br />B. Section Includes: Formed metal roofing panels with colored stone chip finish. <br />C. Associated metal flashings. <br />************************************************************************************************************************ <br /> <br />Edit the Related Sections paragraph below to suit project requirements; delete sections that will not be <br />used, or add sections as required. <br />************************************************************************************************************************ <br /> <br />D. Related Sections: <br />1. Division 6 Section "Rough Carpentry" for framing and sheathing. <br />2. Division 7 Section "Sheet Metal Flashing and Trim" for metal flashing, gutters, and <br />downspouts. <br />3. Division 7 Section "Roof Accessories" for roof ventilators. <br />4. Division 7 Section "Joint Sealants" for field-applied sealants. <br />5. Division 9 Section "Painting" for painting of roof accessories. <br />E. Alternates. <br /> <br />************************************************************************************************************************ <br /> <br />If work of this section will affect alternate bids, retain the following subparagraph. <br />************************************************************************************************************************ <br /> <br />1. Refer to Section 01230 for alternatives involving work of this Section. <br /> <br />1.2 SUBMITTALS <br /> <br />************************************************************************************************************************ <br /> <br />Include submittal requirements below, which are consistent with the scope of the project and extent of <br />work of this section - only request submittals, which are necessary for review of design intent. <br /> <br />Do not request submittals if drawings sufficiently describe the products of this section or if proprietary <br />specifying techniques are used. The review of submittals increases the possibility of unintended varia- <br />tions to drawings. <br /> <br />Insert the appropriate reference to the Division 1 section. <br />************************************************************************************************************************ <br /> <br />1.3 <br />A. <br /> <br />A. <br />B. <br /> <br />Submit under provisions of Section 01300 L-J. <br />Product Data: Include construction details, material descriptions, dimensions of individual <br />components and profiles, finishes, fasteners, accessories, and manufacturers written installation <br />instructions. <br />Shop Drawings: Include roof plans and elevations; sections at hips, ridges, gables, valleys, and <br />eaves; and details of components, accessories, and attachments to other work. <br />Samples for Initial Selection: Manufacturer's color charts and samples consisting of units or <br />sections of units showing the full range of colors, textures, and patterns available for each type <br />DECRA Villa Tile indicated. <br /> <br />C. <br /> <br />D. <br /> <br />QUALITY ASSURANCE <br />Regulatory Requirements: <br />1. Conform to applicable building code for roof assembly fire hazard requirements. <br />2. Conform to building code for minimum wind uplift resistance. <br /> <br />DECRA Roofing Systems <br />Master Guide Specifications <br /> <br />07314 - 2 <br /> <br />Stone Coated Metal Roof Tile (Villa Tile) <br />12-07 -07 <br />