08-7456 - Laserfiche WebLink

Browse Search

PRODUCT LINE INFORMATION AUTOPULSE 542R: Six zone, 24 volt Agent Release Control Panel (includes backpox, power supply, technical manual, and a frame & post operating instruction sheet) for single and dual hazard deluge and preaction applications. AUTOPULSE 542R(E): Same as above but allows connection to 220/240 VAC. CAC-5X: Class A Converter Module can be used to convert the Style B (Class B) Initiating Device Circuits to Style 0 (Class A) and Style Y (Class B) Output Circuits to Style Z (Class A). Note: Two Class A Converter modules are required to convert all four Output Circuits and six Initiating Device Circuits. 4XTM: Transmitter Module provides a supervised output for local energy municipal box transmitter and alarm and trouble reverse polarity. It includes a disable switch and disable trouble LED. N-ANN-80: LCD Annunciator is a remote LCD annunciator that mimics the information displayed on the FACP LCD display. Recommended wire type is un-shielded. N-ANN-LED: Annunciator Module mounts in the DP-51050LED Dress Panel and provides three LEOs for each zone: Alarm, Trouble and Supervisory. N-ANN-RLY: Relay Module, which can be mounted inside the cabinet, provides 10 programmable Form-C relays. N-ANN-SIPG: SeriallParallel Printer Gateway module provides a connection for a serial or parallel printer. N-ANN-I/O: LED Driver Module provides connections to a user-supplied graphic annunciator. DP-51050: Dress panel (red) is available as an option. The dress panel restricts access to the system wiring while allowing access to the membrane switch panel. DP-51050LED: Dress panel is available as an option. The dress panel restricts access to the system wiring while allowing access to the membrane switch panel. It also allows the installation of an optional ANN-LED annunciator module. TR-CE: Trim-ring (red) is available as an option. The trim-ring allows semi-flushing mounting of the cabinet. BB-26: Battery box, holds up to two 26 Amp Hour batteries and CHG-75. BB-55: Battery box, houses two 55 Amp Hour batteries. BAT Series Batteries F SYSTEM SPEClFlCAnONS SYSTEM CAPACITY . Annunciators: 8 ELECTRICAL SPECIFICATIONS . AUTOPULSE 542R (FLPS-7 Power Supply): 120 VAG, 50/60 Hz, 2.3 amps . AUTOPULSE 542R(E) (FLP5-7 Power Supply): 240 VAC, 50 HZ, 1.15 amps . Wire size: minimum 14 AWG (2.0 mm2) with 600 V insulation, super- vised, nonpower-Iimited CABINET SPECIFICATIONS Door: 19.26 in. (48.92 cm) high x 16.82 in. (42.73 cm) wide x 0.72 in. (1.82 cm) deep Backbox: 19.00 in. (48.26 cm) high x 16.65 in. (42.29 cm) wide x 5.25 in. (13.34 cm) deep Trim Ring (TR- CE):22.00 in. (55.88 cm) high x 19.65 in. (49.91 cm) wide SHIPPING DIMENSIONS - Height: 20.00 in. (50.80 cm) - Width: 22.50 in. (57.15 cm) - Depth: 8.50 in. (21.59 cm) TEMPERATURE AND HUMIDITY RANGES This system meets NFPA requirements for operation at 32-120 OF (049 OC) and at a relative humidity 93% :l: 2% RH (non-condensing) at 90 OF :l: 3 OF (32 oC :l: 2 OC). However, the useful life of the system's standby batteries and the electronic components may be adversely a ft:lcted by extreme temperature ranges and humidity. Therefore. it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of 60-80 OF (15-27 OC). NFPA STANDARDS - NFPA 12 CO2 Extinguishing Systems (High Pressure Only) - NFPA 12A Halon 1301 Extinguising Systems - NFPA 72 National Fire Alarm Code for Local Fire Alarm Systems and Remote Station Fire Alarm Systems (requires an optional Remote Station Output Module) - NFPA 2001 Clean Agent Fire Extinguishing Systems USTINGS AND APPROVALS The listings and approvals below apply to the basic AUTOPULSE 542R and AUTOPULSE 542R(E) control panels. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. . UL: S4935 ORDERING INFORMA11ON Part No. 433605 433606 Description AUTOPULSE 542R FACP, 120 VAC AUTOPULSE 542RE FACP, 220/240 VAC