Laserfiche WebLink
<br />Installation <br /> <br />Specifications <br /> <br />ASD-PL2F plug-in sensors use a separate base to <br />simplify installation, service, and maintenancl3. A <br />special tool allows maintenance personnel to plug-in <br />and remove sensors without using a ladder. <br /> <br />2.1" (5.1 em) high )[ 4.1" (10.4 em) diameter <br />installed in 8501 base. 6.1" (15.5 em) <br />diameter installed in ADB-FL base. <br />Shipping weight: 5.2 oz. (147 g) <br />Operating <br />temperature: <br /> <br />Size: <br /> <br />Mount the base on a box which is at least 1.5. (3.8 en) <br />deep. Suitable mounting base boxes include: <br /> <br />. 4.0. (10.2 em) square box. <br />· 3.5" (8.9 em) or 4.0. (10.2 em) octagonal box. <br />. Single-gang box (except relay or isolator bases). <br />. With B501 BH or B501 BHT base, use a 4.0. (10,2 em) <br />square box. <br />· With B224RB or B224BI base, use a 3.5" (8.9 em) OGta9- <br />onal box, or a 4.0. (10.2 em) octagonal or square box. <br /> <br />UL-Llsted <br />velocity range: <br /> <br />ASD-PL2F: <br />:320 F to 1 ~~Oo F (00 C to 490 C) <br />ASD-PTL2F: <br />:320 F to 1000 F (00 C to 380 C) <br /> <br />0-4000 ft./min. (1,219.2 mlmin.), <br />suitable for installation in ducts. <br /> <br />Relative <br />humidity: 10-93% (non-condensing) <br />Thermal ratings: Fixed-temperature setpoint <br />1350 F (570 C) <br /> <br />Electrical Specifications <br /> <br />NOTE: Because of the inherent supervision providE!d <br />by the SLC. end-of-line resistors are not required. <br />Wiring "T-taps" or branches are permitted for Style 4 <br />(Class "B") wiring. <br /> <br />Voltage range: <br />Standby current: <br /> <br />15 - 32 volts DC peak <br />(max. avg.): 300 IJA @ 24 VDC <br />(one communication every 5 <br />seconds with LED enabled) <br /> <br />Maximum alarm <br />current: 6.5 mA @ 24 VDC (LED) lit). <br /> <br />Sensor Spacing <br />Gamewell-FCI recommends spacing sensors in ,:;om- <br />pliance with NFPA 72. In low airflow applications with <br />smooth ceilings, space sensors 30 feet (9.1 m) For <br />specific information regarding sensor spacing, place- <br />ment and special applications, refer to NFPA 72. <br /> <br />Bases and Options <br /> <br />ADB-FL: <br />B501: <br />B501 BH or <br />B501 BHT: <br /> <br />B224RB <br />Relay Base: <br /> <br />RA400Z <br />BCK-200 <br /> <br />6.1" (15.5 em) diameter <br />4.1" (10.4 em) diameter <br />Sounder base assembly (B501BHT <br />produces a temporal pattern). <br />Includes B501 base. <br /> <br />Screw terminals: <br />.) <br />Up to 14 AWG (2.0 mm-) <br />Relay tYPE!: Foml-C <br />Rating: <br />2.0A @ 30 VDC resistive; <br />0.3 A @ 1'10 \/DC inductiVE!; <br />1.0 A @ 30 VDC inductive. <br />Dimensions: <br />6.2" x 1.2" (15.7 x 3.0 em) <br />Maximum: 25 devices between <br />isolator bases. <br />Remote a1am1 indicator, LED. <br />Black detectN covers (box of 10). <br /> <br />GAMEWEl.L-FCI <br />12 Clintonville Road, Northford, CT 06472-1653 USA' Tel: (203) 484-7161' Fax: (203) 484-~'118 <br />, 9020-0617 Rev, E page 2 of 2 www.gamewell-fcl.com <br /> <br />----~--~~~-.... <br />\ <br /> <br />\ <br /> <br />, <br />