08-7849 - Laserfiche WebLink

Browse Search

Models available: Indoor wall-mount: horn, strobe, 2-wire hornJstrobl~, 4-wire horn/strobe. Indoor ceiling-mount: strobe, 2-wire horn/strobe, 4-wire horn/strobe. Outdoor wall-mount: horn, strobe, 2-wire horn/strobe, 4-wire horn/strobe. Outdoor ceiling-mount: strobe, 2-wire horn/strobe, 4-wire horn/strobe. ities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to switch between a Temporal 3 pattern and a Non-TE,mporal (continuous) pat- tern. These options are set by a multiple position switch. On four-wire products, the strobB shall be powered inde- pendently of the sounder. The horn on horn/strobe models shall operate on a coded or non..coded power supply. Engineering Specifications Outdoor Products SpectrAlert Advance outdoor horns, &trobes and horn! strobes shall be listed for outdoor use by UL and shall operate between -40oF and '1510F (-40oC and 660C). The products shall be listed for use with a System Sensor out- door/weatherproof backbox with half-inci1 and three- fourths-inch conduit entries. SpectrAlert Advance hOrnS, strobes, and horn/strobel; shall mount on a standard 4.0" x4.0" x 1.5" (10.16 x 10.16 x 3,81 em) backbox, 4.0" (10.16 em) octagonal backbox, or a double- gang backbox. Two-wire products shall also mount on a single-gang 2.0" x 4.0" x 1.875" (5.08 x 10,16 x 4.763 em) back- box. A universal mounting plate shall be used for mO'Jnting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate, Also, SpectrAlert Advance products, when used with the Sync.Circuit™ Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync-Circuit Module, 12-volt rated notification appliance circuit outputs shall operate between 9 and 17.5 volls; 24- volt rated notification appliance circuit outputs shall operate between 17 and 33 volts. Indoor SpectrAlert Advance prod- ucts shall operate between 320F and 1200F (OOC and 490C) from a regulated DC, or full-wave-rectified, unfiltered power supply. Strobes and horn/strobes shall have field-s,e1ed- able candela settings including 15, 15175,30,75,95, 110, 115,135,150,177,185. Synchronization Module The module shall be a System Sensor S:fnc.Circuit Listed to UL STD 464 and shall be approved for fire protective service. The modul,e shall synchronize Spec- trAlert strobes at 1 Hz and horns at Temporal 3. Also, while operating the strobes, the module shall silence the horns on horn/strobe models over a single pair of wires. The module shall mount to a 4.688" x 4.688" x 2.125" (11.906 x 11.906 x 5.398 em) backbox. The module shall also control two Style Y (Class B) circuits or one Style Z (Class A) cir- cuit. The module shall synchronize multiple zones. Daisy- chaining two or more synchronization modules together will synchronize all the zones the modull~S control. The module shall not operate on a coded power supply. Strobe The strobe shall be a System Sensor SpectrAlert Advance Model Listed to UL STD 1971 and shall he approved for fire protective service. The strobe shall he wired as a primary-signaling notification appliancEl and comply with the Americans with Disabilities Act require- ments for visible signaling appliances, flashing at 1 H;~ over the strobe's entire operating voltage range. The Strobi3 light shall consist of a xenon flash tube and associated lens! reflector system. Horn/Strobe Combination The horn/strobe shall be a System Sensor SpectrAIElrt Advance Model Listed to UL Standards 1971 and 464 and shall be approved for fire protective serviCE'. The horn/strobe shall be wired as a primary-signaling notifica- tion appliance and comply with the Americans with Disabil- /- ( ------ I GAMEWELL-FCI 12 Clinlonville Road, Northford, CT 06472-1653 USA' Tel: (203) 484-7161 . Fax: (203) 484-;'118 CS-2539 Rev. A page 2 of4 \'IfWVIr.gamewell-fci.com , '-,