Laserfiche WebLink
<br /> <br />C-BUCK Engineering <br /> <br />FL #: FL 8068.1 <br />Date: 11/30/06 <br />Report No.: 06-168-NS-16-S4W <br />Page 20f6 <br /> <br />Specialty Structural Engineering <br /> <br />C-Buck, Inc. Florida Certificate of Authorization # 8064 <br /> <br />EVALUATED INSTALLATION METHOD <br /> <br />ATTACHMENT: <br />Fastener Description: <br /> <br />Adhesive Description: <br /> <br />INSTALLATION: <br />Method 1: <br /> <br />Method 2: <br /> <br />Manufacturer's <br />Installation Instructions: <br /> <br />Evaluation Report: <br /> <br />Panels shall be attached to the deck with #10 x minimum penetration <br />through deck 3/16", pancake head, corrosion resistant, wood screws, per <br />ANSI/ASME BI8.6.4. <br /> <br />3M Scotch-Seal™ Polyurethane Adhesive Sealant 560: One component, <br />polyurethane adhesive sealant conforming to ASTM D 412. <br /> <br />Method 1: 84.25 osf Desien Pressure <br />Install the "I" Nail Strip" panel to the deck with Fasteners spaced a <br />maximum of 12" o.c. along the length of the panel and 3" from all ends. <br />Panel ribs shall be fully engaged to form an integral snap-lock. <br /> <br />Apply a 3/8" minimum bead of 3M Scotch-Seal™ polyurethane adhesive <br />sealant 560 atop the rear leg of the male joint, adjacent to the fasteners <br />and along the entire length of the panel. Attach adjacent panel by placing <br />the female rib over the adhesive and over the male rib. <br /> <br />Method 2: 114.25 osf Desien Pressure <br />Install the "I" Nail Strip" panel to the deck with Fasteners spaced a <br />maximum of 6" o.c. along the length of the panel and 3" from all ends. <br />Panel ribs shall be fully engaged to form an integral snap-lock. <br /> <br />Apply a 3/8" minimum bead of 3M Scotch-Seal™ polyurethane adhesive <br />sealant 560 atop the rear leg of the male joint, adjacent to the fasteners <br />and along the entire length of the panel. Attach adjacent panel by placing <br />the female rib over the adhesive and over the male rib. <br /> <br />Install the system in compliance with the attached installation method. <br /> <br />Refer to the manufacturer's installation instructions as a supplemental <br />guide for attachment. <br /> <br />Conditions and Limitations of the Evaluation Report Apply <br />