|
TYPE MANUFACTURER CATALOG NO.
<br />A LITHONIA 2SPG02– U31 –Al2 -120
<br />Al SAME AS A EXCEPT PROVIDE WITH
<br />EMERGENCY BALLAST
<br />8 LITHONIA EJ -2 -32 -120
<br />C KURTVERSEN P602 –SC –EB
<br />C1 SAME AS C EXCEPT PROVIDE WITH
<br />EMERGENCY BALLAST
<br />LITHONIA LED -1 –RC- 1201277
<br />EX -1
<br />NOTES:
<br />0 PROVIDE ELECTRONIC BALLAST
<br />0 PROVIDE EMERGENCY BALLAST
<br />LIGHTING FIXTURE SCHEDULE
<br />VOLTS NO. OF LAMP LAMP
<br />LAMPS WATTS TYPE
<br />120 2 31 TB
<br />DESCRIPTION
<br />120 2 31 18 2'X2' RECESSED FLUOR. TROFFER
<br />120 2 32 T8 4' FLOUR, INDUSTRIAL FIXTURE
<br />120 2 26 PL SURFACE MTD FLUOR FIXTURE
<br />120 2 26 PL
<br />120 – – LED TOP MOUNTED EXIT SIGN
<br />0
<br />0
<br />0
<br />0
<br />0
<br />REMARKS
<br />GENERAL NOTES:
<br />THE CONTRACTOR SHALL PROVIDE AND MAKE OPERAT1ONAL THE ELECTRICAL
<br />SYSTEMS & EQUIPMENT ASSOCIATED WITH THE WORK DESCRIBED IN THE BID
<br />DOCUMENTS FOR THIS PROJECT.
<br />2. ALL CONDUITS St- ALL BE 3/4" UNLESS OTHERWISE INDICATED
<br />3. ALL WIRING SHALL. BE RUN CONCEALED UNLESS OTHERWISE SPECIFIED.
<br />4, EXACT LOCATION OF HVAC Sc PLUMBING EQUIPMENT THAT REQUIRE ELECTRICAL
<br />CONNECTIONS ART: SHOWN ON THE HVAC & PLUMBING DRAWINGS.
<br />5. THE CONTRACTOR SHALL COORDINATE THE EXACT LOCATION AND ROUGHING IN
<br />DIMENSIONS OF ALL EQUIPMENT AND SHALL MAKE ALL FINAL CONNECTIONS AS
<br />REQUIRED, I.E., POWER, CONTROL, INTERLOCK, ETC.
<br />6. `IRE AND CONDUIT SIZES INDICATE ON HOMERUNS SHALL BE CONTINUOUS
<br />THROUGH CIRCUIT. WIRING AND CONDUIT SHALL BE REQUIRED BETWEEN ALL
<br />OUTLETS INDICATED WITH CIRCUIT NUMBERS AND PANEL DESIGNATIONS,
<br />7. ALL SWITCH CON ROLS SHALL BE PROVIDED WITH WIRING AND CONDUIT AS
<br />REQUIRED.
<br />8. ALTHOUGH ALL BRANCH CIRCUIT W1RE AND CONDUIT IS NOT SHOWN, IT IS THE
<br />INTENT OF THESE DOCUMENTS THAT A COMPLETE BRANCH CIRCUIT WRING
<br />SYSTEM BE INSTF LLED.
<br />9. THE ELECTRICAL :ON TRACTOR SHALL FURNISH AND INSTALL ALL INCIDENTAL
<br />ACCESSORIES NECESSARY TO MAKE THE ELECTRICAL WORK COMPLETE AND
<br />READY FOR OPERATION.
<br />10. DRAWINGS ARE D AGRAMMATIC ONLY: EXACT LOCATION, MOUNTING HEIGHTS OF
<br />EQUIPMENT AND ?OUTING OF RACEWAYS SHALL BE COORDINATED WITH THE
<br />EQUIPMENT RFQU REMENTS AND FIELD CONDITIONS.
<br />11. THE CONTRACTCF SHALL PROVIDE AND INSTALL ALL NECESSARY SUPPORTS AND
<br />HARDWARE FOR HOUNTING OF ELECTRICAL EQUIPMENT.
<br />12. THE ENTIRE ELECTRICAL SYSTEM SHALL BE TESTED FOR PROPER GROUNDING AND
<br />OPERATION PRICF TO FINAL ACCEPTANCE AS SPECIFIED IN THE BID
<br />SPECIFICATIONS 4 ND /OR AS SPECIFIED HEREIN. TESTS SHALL VERIFY THAT THE
<br />ENTIRE ELECTRICAL SYSTEM HAD NO SHORT– CIRCUITS, OPENS, OVERLOADS, OR
<br />PANEL UNBALANCES. ALL EQUIPMENT AND WIRING SYSTEMS SHALL BE
<br />GROUNDED IN ACCORDANCE WITH THE REQUIREMENTS OF THE N.E.C.
<br />13, ALL ELECTRICAL MATERIALS AND EQUIPMENT FURNISHED FOR THIS PROJECT
<br />SHALL BE NE ' AND APPROVED BY U.L., EXCEPT WHERE NOTED.
<br />14, FOR ADDITIONAL 'REQUIREMENTS, THE CONTRACTOR SHALL REFER TO DRAWING
<br />AND BID SPECIFICATIONS.
<br />15. ALL ELECTRICAL WORK TO BE DONE IN ACCORDANCE WITH THE LATEST NATIONAL
<br />ELECTRICAL COCE AND LOCAL CODES WHERE APPLICABLE.
<br />16. ALL FLUORESCENT FIXTURES SHOW ARE RELOCATED UNLESS NOTED OTHERWISE.
<br />17, ALL SHADED rLU)RESCENT LIGHTING FIXTURES SHALL BE CONTROLLED BY A
<br />SWITCH AS INDICATED ON FLOOR PLAN AND ALSO CONNECTED TO LINE SIZE OF
<br />LOCAL SWITCH FOR PROPER EMERGENCY BALLAST OPERATION.
<br />18, ALL TYPE "EX" L GHTING FIXTURES SHALL BE CONNECTED TO CIRCUIT INDICATED
<br />AHEAD OF LOCAL SWITCH.
<br />19. CONTRACTOR TO PROVIDE ALL NEW ELECTRONIC BALLASTS FOR ALL
<br />FLUORESCENT FI ›TURES UNDER THIS PROJECT AND PROVIDE EMERGENCY BALLAST
<br />FOR THOSE FIX1LRES THAT ARE GOING TO BE EMERGENCY LIGHTS.
<br />20. ALL NEW 2`X2' FLUORESCENT FIXTURES ARE TO BE TYPE 'A' UNLESS OTHERWISE
<br />NOTED ON DWGS (SEE LIGHTING FIXTURE SCHEDULE FOR DESCRIPTION OF TYPE
<br />'A' FIXTURES)
<br />!OEM
<br />Revisions:
<br />Seal:
<br />Consultants:
<br />BOSEK, GIBSON & ASSOCIATES
<br />ENGINEERING CONSULTANTS
<br />508 11. F1ZTC H ER AVENUE
<br />TAMPA. FLORIDA 33812
<br />OPPICE:(6 960 -3999 PAX:(513) 964 -0920
<br />E -MAIL: b`atpa•gte.net
<br />E ENTS
<br />ARCHITECTS .INTERIOR DESIGNERS
<br />\***>%•%•/-WiN:"
<br />7- ay I 4N
<br />I 7A 3".. c 1
<br />Vo \ aft.
<br />"<"•.:\ X >
<br />The Edgewater Building
<br />600 South Magnolia Avenue
<br />Suite 150
<br />Tampa, Florida 33606
<br />Phone (813) 251 -0565
<br />Fax (813) 251 -0567
<br />First Union Notional Bank
<br />o f Florida
<br />ZEFNYRNILLS
<br />38421 5TH AVENUE
<br />ZEPPYRNILLS, FLORIDA
<br />Drawing No. /Date
<br />E-
<br />99255
<br />3 MAY 19
<br />Drawing Title /Scale /Drawn by W.J.C.
<br />LEGEND, GENERAL NOTES
<br />AND LIGHTING SCHEDULE
<br />SCALE: NOT TO SCALE
<br />BL DGi:
<br />ELECTRICAL SYMBOL LEGEND
<br />SYMBOL
<br />DESCRIPTION
<br />MOUNTING
<br />O
<br />CEILING MOUNTED LIGHT FIXTURE, LETTER INDICATES TYPE. LOWER CASE LETTER
<br />INDICATES SWITCH CONTROL.
<br />SEE FIXTURE SCHEDULE
<br />•
<br />SAME AS ABOVE EXCEPT EMERGENCY BRANCH, NO SWITCH CONTROL.
<br />SEE FIXTURE SCHEDULE
<br />2'x4' FLUOR FIXTURE
<br />' FLUOR, FIXTURE
<br />El FLUORESCENT
<br />FIXTURE ON EMERGENCY BRANCH.
<br />SEE FIXTURE SCHEDULE
<br />EXIT LIGHT CEILING MOUNTED
<br />S
<br />SINGLE POLE TOGGLE SWITCH. LOWER CASE LETTER INDICATES LIGHTING CONTROLLED.
<br />M.H. 4' -0" TO CENTERLINE;
<br />FLOOR OUTLET BOX W /(3) IG DUPLEX, (1) VOICE /DATA OUTLET.
<br />FLUSH MTD TO FLOOR
<br />10 lo
<br />DUPLEX RECEPTACLE, 20A 125V.
<br />�Pot
<br />.H. 'LI
<br />B V�(/E COUNTER
<br />U.O.N.
<br />DUPLEX RECEPTACLE WITH GROUND FAULT CIRCUIT INTERRUPTER.
<br />DUPLEX RECEPTACLE, 20A 125V,
<br />M.H. 4' -0" TO CENTERLINE,
<br />M.H. 18° TO CENTERLINE
<br />U.O.N.
<br />. ;.
<br />DOUBLE DUPLEX RECEPTACLE, 20A 125V.
<br />M.H. 4' -0" TO CENTERLINE
<br />DOUBLE DUPLEX RECEPTACLE, 20A 125V.
<br />TWO CELL SURFACE METAL RACEWAY, WITH SEPARATE CELLS FOR POWER RECEPTACLES
<br />AND VOICE /DATA, WIREMOLD G6000 SERIES WITH REQ'D SUPPORT,
<br />MTD BELOW COUNTER
<br />CEILING MOUNTED DUPLEX RECEPTACLE, 20A 125V,
<br />_ .
<br />DATA /TELEPHONE OUTLET. PROVIDE 3/4 "C EMPTY CONDUIT STUB –UP SUSP. CEILING.—
<br />FLUSH CEILING
<br />�'$� 11�E LI N
<br />UM ,ON .N.
<br />V
<br />AS INDICATED
<br />MI
<br />ELECTRICAL PANELBOARD
<br />1 1
<br />LA-1.3
<br />HOMERUN TO PANEL BOARD INDICATED. LETTERS INDICATE PANEL, NUMBERS INDICATE
<br />CIRCUIT(S). ALL HOMERUNS SHALL HAVE A GROUND AND NEUTRAL CONDUCTOR. UNLESS
<br />OTHERWISE NOTED PROVIDE #12 AWG CU CONDUCTORS AS REQUIRED FOR CIRCUITS
<br />SHOWN. ALL CONDUITS SHALL BE SIZED PER CODE. MINIMUM 3/4 "C. IT SHALL BE
<br />PERMISSIBLE TO GROUP A MAXIMUM OF THREE CIRCUITS WITH NEUTRAL AND EQUIPMENT
<br />GROUND PER HOMERUN.
<br />SEE SPECIFICATIONS
<br />—
<br />•�-- -_.-- --
<br />CONDUIT CONCEALED IN CEILING SPACE OR WALL MINIMUM 3/4 ". UNLESS OTHERWISE
<br />NOTED PROVIDE #12 AWG CU CONDUCTORS AS REQUIRED FOR CIRCUITS SHOWN.
<br />PROVIDE EQUIPMENT GROUND CONDUCTOR SIZED AS PER N.E.C.
<br />SEE SPECIFICATIONS
<br />—
<br />CONDUIT UNDERGROUND ON 3/4" C. UNLESS OTHERWISE NOTED. PROVIDE
<br />#12 AWG CU CONDUCTORS AS REQUIRED FOR CIRCUITS SHOWN. ALL CONDUITS SHALL
<br />BE SIZED PER CODE. MINIMUM 3/4 "C. IT SHALL BE PERMISSIBLE TO GROUP A MAXIMUM
<br />OF THREE CIRCUITS WITH NEUTRAL AND EQUIPMENT GROUND PER HOMERUN.
<br />SEE SPECIFICATIONS
<br />JUNCTION BOX OR OUTLET BOX, SIZE AS REQUIRED PER N.E.C.
<br />0
<br />DRY TYPE TRANSFORMER.
<br />a
<br />FIRE ALARM MANUAL PULL STATION.
<br />M,H. 4' - TO CENTER
<br />SMOKE DETECTOR
<br />CEILING MOUNTED
<br />1 0
<br />FIRE ALARM STROBE
<br />MOUNT 80" ABOVE FLOOR
<br />OR 6" BELOW CEILING,
<br />WHICHEVER IS LOWER
<br />FIRE ALARM CONTROL PANEL.
<br />FACF
<br />8
<br />COMBINATION FIRE ALARM CHIME /STROBE
<br />MOUNT 80" ABOVE FLOOR
<br />OR 6" BELOW CEILING,
<br />WHICHEVER IS LOWER
<br />Q
<br />P.A. SPEAKER
<br />FA
<br />SECURITY KEY PAD
<br />��
<br />CEILING MTD. SECURITY CAMERA
<br />EWC
<br />EXISTING TO REMAIN
<br />(E)
<br />EXISTING TO REMAIN
<br />(N)
<br />NEW ITEM
<br />IG
<br />ISOLATED GROUND
<br />AFF,
<br />ABOVE FINISHED FLOOR
<br />N.I.C.
<br />NOT IN CONTRACT
<br />(R)
<br />EXISTING ITEM TO BE REMOVED
<br />(RL)
<br />EXISTING ITEM TO BE RELOCATED
<br />TYPE MANUFACTURER CATALOG NO.
<br />A LITHONIA 2SPG02– U31 –Al2 -120
<br />Al SAME AS A EXCEPT PROVIDE WITH
<br />EMERGENCY BALLAST
<br />8 LITHONIA EJ -2 -32 -120
<br />C KURTVERSEN P602 –SC –EB
<br />C1 SAME AS C EXCEPT PROVIDE WITH
<br />EMERGENCY BALLAST
<br />LITHONIA LED -1 –RC- 1201277
<br />EX -1
<br />NOTES:
<br />0 PROVIDE ELECTRONIC BALLAST
<br />0 PROVIDE EMERGENCY BALLAST
<br />LIGHTING FIXTURE SCHEDULE
<br />VOLTS NO. OF LAMP LAMP
<br />LAMPS WATTS TYPE
<br />120 2 31 TB
<br />DESCRIPTION
<br />120 2 31 18 2'X2' RECESSED FLUOR. TROFFER
<br />120 2 32 T8 4' FLOUR, INDUSTRIAL FIXTURE
<br />120 2 26 PL SURFACE MTD FLUOR FIXTURE
<br />120 2 26 PL
<br />120 – – LED TOP MOUNTED EXIT SIGN
<br />0
<br />0
<br />0
<br />0
<br />0
<br />REMARKS
<br />GENERAL NOTES:
<br />THE CONTRACTOR SHALL PROVIDE AND MAKE OPERAT1ONAL THE ELECTRICAL
<br />SYSTEMS & EQUIPMENT ASSOCIATED WITH THE WORK DESCRIBED IN THE BID
<br />DOCUMENTS FOR THIS PROJECT.
<br />2. ALL CONDUITS St- ALL BE 3/4" UNLESS OTHERWISE INDICATED
<br />3. ALL WIRING SHALL. BE RUN CONCEALED UNLESS OTHERWISE SPECIFIED.
<br />4, EXACT LOCATION OF HVAC Sc PLUMBING EQUIPMENT THAT REQUIRE ELECTRICAL
<br />CONNECTIONS ART: SHOWN ON THE HVAC & PLUMBING DRAWINGS.
<br />5. THE CONTRACTOR SHALL COORDINATE THE EXACT LOCATION AND ROUGHING IN
<br />DIMENSIONS OF ALL EQUIPMENT AND SHALL MAKE ALL FINAL CONNECTIONS AS
<br />REQUIRED, I.E., POWER, CONTROL, INTERLOCK, ETC.
<br />6. `IRE AND CONDUIT SIZES INDICATE ON HOMERUNS SHALL BE CONTINUOUS
<br />THROUGH CIRCUIT. WIRING AND CONDUIT SHALL BE REQUIRED BETWEEN ALL
<br />OUTLETS INDICATED WITH CIRCUIT NUMBERS AND PANEL DESIGNATIONS,
<br />7. ALL SWITCH CON ROLS SHALL BE PROVIDED WITH WIRING AND CONDUIT AS
<br />REQUIRED.
<br />8. ALTHOUGH ALL BRANCH CIRCUIT W1RE AND CONDUIT IS NOT SHOWN, IT IS THE
<br />INTENT OF THESE DOCUMENTS THAT A COMPLETE BRANCH CIRCUIT WRING
<br />SYSTEM BE INSTF LLED.
<br />9. THE ELECTRICAL :ON TRACTOR SHALL FURNISH AND INSTALL ALL INCIDENTAL
<br />ACCESSORIES NECESSARY TO MAKE THE ELECTRICAL WORK COMPLETE AND
<br />READY FOR OPERATION.
<br />10. DRAWINGS ARE D AGRAMMATIC ONLY: EXACT LOCATION, MOUNTING HEIGHTS OF
<br />EQUIPMENT AND ?OUTING OF RACEWAYS SHALL BE COORDINATED WITH THE
<br />EQUIPMENT RFQU REMENTS AND FIELD CONDITIONS.
<br />11. THE CONTRACTCF SHALL PROVIDE AND INSTALL ALL NECESSARY SUPPORTS AND
<br />HARDWARE FOR HOUNTING OF ELECTRICAL EQUIPMENT.
<br />12. THE ENTIRE ELECTRICAL SYSTEM SHALL BE TESTED FOR PROPER GROUNDING AND
<br />OPERATION PRICF TO FINAL ACCEPTANCE AS SPECIFIED IN THE BID
<br />SPECIFICATIONS 4 ND /OR AS SPECIFIED HEREIN. TESTS SHALL VERIFY THAT THE
<br />ENTIRE ELECTRICAL SYSTEM HAD NO SHORT– CIRCUITS, OPENS, OVERLOADS, OR
<br />PANEL UNBALANCES. ALL EQUIPMENT AND WIRING SYSTEMS SHALL BE
<br />GROUNDED IN ACCORDANCE WITH THE REQUIREMENTS OF THE N.E.C.
<br />13, ALL ELECTRICAL MATERIALS AND EQUIPMENT FURNISHED FOR THIS PROJECT
<br />SHALL BE NE ' AND APPROVED BY U.L., EXCEPT WHERE NOTED.
<br />14, FOR ADDITIONAL 'REQUIREMENTS, THE CONTRACTOR SHALL REFER TO DRAWING
<br />AND BID SPECIFICATIONS.
<br />15. ALL ELECTRICAL WORK TO BE DONE IN ACCORDANCE WITH THE LATEST NATIONAL
<br />ELECTRICAL COCE AND LOCAL CODES WHERE APPLICABLE.
<br />16. ALL FLUORESCENT FIXTURES SHOW ARE RELOCATED UNLESS NOTED OTHERWISE.
<br />17, ALL SHADED rLU)RESCENT LIGHTING FIXTURES SHALL BE CONTROLLED BY A
<br />SWITCH AS INDICATED ON FLOOR PLAN AND ALSO CONNECTED TO LINE SIZE OF
<br />LOCAL SWITCH FOR PROPER EMERGENCY BALLAST OPERATION.
<br />18, ALL TYPE "EX" L GHTING FIXTURES SHALL BE CONNECTED TO CIRCUIT INDICATED
<br />AHEAD OF LOCAL SWITCH.
<br />19. CONTRACTOR TO PROVIDE ALL NEW ELECTRONIC BALLASTS FOR ALL
<br />FLUORESCENT FI ›TURES UNDER THIS PROJECT AND PROVIDE EMERGENCY BALLAST
<br />FOR THOSE FIX1LRES THAT ARE GOING TO BE EMERGENCY LIGHTS.
<br />20. ALL NEW 2`X2' FLUORESCENT FIXTURES ARE TO BE TYPE 'A' UNLESS OTHERWISE
<br />NOTED ON DWGS (SEE LIGHTING FIXTURE SCHEDULE FOR DESCRIPTION OF TYPE
<br />'A' FIXTURES)
<br />!OEM
<br />Revisions:
<br />Seal:
<br />Consultants:
<br />BOSEK, GIBSON & ASSOCIATES
<br />ENGINEERING CONSULTANTS
<br />508 11. F1ZTC H ER AVENUE
<br />TAMPA. FLORIDA 33812
<br />OPPICE:(6 960 -3999 PAX:(513) 964 -0920
<br />E -MAIL: b`atpa•gte.net
<br />E ENTS
<br />ARCHITECTS .INTERIOR DESIGNERS
<br />\***>%•%•/-WiN:"
<br />7- ay I 4N
<br />I 7A 3".. c 1
<br />Vo \ aft.
<br />"<"•.:\ X >
<br />The Edgewater Building
<br />600 South Magnolia Avenue
<br />Suite 150
<br />Tampa, Florida 33606
<br />Phone (813) 251 -0565
<br />Fax (813) 251 -0567
<br />First Union Notional Bank
<br />o f Florida
<br />ZEFNYRNILLS
<br />38421 5TH AVENUE
<br />ZEPPYRNILLS, FLORIDA
<br />Drawing No. /Date
<br />E-
<br />99255
<br />3 MAY 19
<br />Drawing Title /Scale /Drawn by W.J.C.
<br />LEGEND, GENERAL NOTES
<br />AND LIGHTING SCHEDULE
<br />SCALE: NOT TO SCALE
<br />BL DGi:
<br />
|