Laserfiche WebLink
CAUTION: Direct contact between pressure treated lumber, green, <br /> damp, and metal roofing must be avoided in order to prevent potential <br /> corrosion and moisture buildup. THE battens must be fastened to the roof <br /> deck with minimum #6 screws at 12" on- center or two mimnimum 8d common <br /> or pneumatic nails spaced 8" on- center or one every 4" on- center (or by <br /> applicable calculations according to ASCE 7 -98.) <br /> Battens must be installed to support the entire width and length of ridge, <br /> eave, hip, valley, and gable end trims. Battens are optional if re- roofing over <br /> shingles. <br /> Note: Re- roofing over shingles without a batten is allowed providing the roof <br /> has been checked by a licensed roofing contractor to insure levelness and <br /> pullout integrity. Put down 30# Felt with a 30" lap on Felt Paper. <br />