Laserfiche WebLink
DEC -16 -2009 16:17 P.05 <br /> OIL <br /> 70948.01409-47 <br /> ,Architectural Testing Page 3of9 <br /> I <br /> Test Specimen Descriptions: (Continued) ,' <br /> Test S ecimen #3: TI -R40 1219 x,2286 (48 x 90) (Fin) <br /> Overall Size: 1219 mm (48 ") wide by 2286 mm (90 ") high <br /> Sash Size: 1186 min (46- 1,1/1 ") wide by 906 nun (35- 11/16 ") high <br /> Fixed Daylight Opening Size: 1137 mm (44 -314 ") wide by 13081mm (51 -1/2 ") high <br /> Screen Size:, 1156 um (45- 1J2 ") wide by 900 mm (35 -7/16 ")'high <br /> Overall Area: 2.79 m (30 ft <br /> Glazing Type: The unit was glazed with a single sheet of 3116" annealed glass. <br /> The sash and the fixed lite were channel glazed with a wrap mound rubber gasket <br /> Reinforcement: No reinforcerment was utilized. <br /> Installation; The window was installed into a #2 Spruce-Pine-Fir wood test buck. The <br /> nail fin was set •onto a bead of silicone and secured with #6 x .1 -5/8" drywall screws <br /> located 3" from each comer and 12" on center through the nail fin into the wood buck. <br /> The following descriptions apply to all specimen <br /> Finish: All aluminum was white. <br /> Frame Construction: The frame was constructed from extruded'8luxn3uum with coped, <br /> butted, and sealed corners. The corners were secured with two #6 x 3/8" pan head screws <br /> located through the jambs into the , sill and head screw boss. The i ed sash was secured to <br /> the frame with one #8 x 1/2" long square drive pan head screw at each corner, through the <br /> frame into the sash. <br /> Sash Construction: The sash were constructed of extruded alurxiir :u with coped, butted, <br /> and sealed corners. The corners were secured with one #6 x 5/8" pan head screw through <br /> the stiles into the rails screw boss. <br /> • <br /> • <br /> • <br />