Laserfiche WebLink
• <br /> Chapter 3 — System Design <br /> Page 3 -4 <br /> REV. 3 <br /> PCI- 25sABC with 2 Nozzles <br /> (Duct nozzles only) <br /> CYLINDER 0 <br /> T1 <br /> 1 NOZZLE if <br /> 002863PC <br /> ► Maximum Maximum Nozzle <br /> Nozzle Nozzle Length Elbows Height From <br /> Cylinder Size Quantity Type Piping Section Size Maximum Maximum Base of Tank <br /> • PCI- 25sABC 2 N -DCT Cylinder to T1 3/4 in. 35 ft. (10.7 m) 5 16 ft. 1 in. (4.9 m) <br /> ► T1 to Nozzle 3/4 in. 15 ft. (4.6 m) 3 16 ft. 1 in. (4.9 m) <br /> NOTE: <br /> 1. These limitations apply to PCI- 25sABC using two N -DCT nozzles. <br /> 2. System piping must be balanced. Balanced piping is that in which the difference between the shortest actual pipe length <br /> from T1 to nozzle and the longest actual pipe length from T1 to nozzle does not exceed 10% of the longest actual pipe <br /> length from T1 to nozzle. The number and type of fittings for all last tee to nozzle sections must be equal. <br /> 3. A Main /Reserve Swing Check Valve, Part No. 417788, may be located between the cylinder and Ti. <br /> ULEX 3437 CEx732 <br /> September 1, 2006 <br />