10-10393 - Laserfiche WebLink

Browse Search

• Chapter 3 — System Design o Page 3 -8 REV. 2 Range Range 4. Small Wok (24 In. (61 cm) diameter x 6 in. (15 cm) Length - L Width — W Radius — R depth maximum) in (cm) in. (cm) in. (cm) Two nozzles are available for small wok protection: High 24 (61) 18 (46) 4 3/4 (12) proximity and low proximity. 24 (61) 19 (48) 41/2 (11) 24 (61) 20 (51) 4 1/8 (10) The 1H nozzle, Part No. 551029, Is used for high prox- 24 (61) 21 (53) 3 7/8 (10) lmity wok protection. This nozzle is a one (1) flow 24 (61) 22 (56) 3 1/2 (9) nozzle. The nozzle must be located anywhere on the 24 (61) 23 (58) 3 1/8 (8) perimeter of the appliance, 24 in. to 48 in. (61 to 24 (61) 24 (61) 2 7/8 (7) 122 cm) above the top edge of the wok and aimed at the 24 (61) 25 (64) 2 1/2 (6) center of the wok. See Figure 3 -6. 24 (61) 26 (66) 2 1/8 (5 ) The 1L nozzle, Part No. 551026, is used for low proxim- 24 (61) 27 (69) 1 3/4 (4) ity wok protection. This nozzle Is a one (1) flow nozzle. 24 (61) 28 (71) 1 3/8 (3) The nozzle must be located anywhere on the perlme- 25 (64) 18 (46) 4 3/8 (11) ter of the appliance, 13 in. to 24 in. (33 to 61 cm) above 25 (64) 19 (48) 4 1/8 (10) the top edge of the wok and aimed at the center of the 25 (64) 20 (51) 3 3/4 (10) 25 (64) 21 (53) 3 1/2 (9) wok. See Figure 3 -6. 25 (64) 22 (56) 31/8 (8) IIH 25 (64) 23 (58) 2 7/8 (7) 25 (64) 24 (61) 2 1/2 (6) 25 (64) 25 (64) 2 1/8 (5) /I 25 (64) 26 (66) 1 3/4 (4) ,' I 25 (64) 27 (69) 13/8 (3) 25 (64) 28 (71) 1 (2) 1' iH, 1L 26 (66) 18 (46) 4 (10) i I 26 (66) 19 (48) 3 3/4 (10) ; , II 48 IN. 26 (66) 20 (51) 3 3/8 (9) (122 cm) 26 (66) 21 (53) 31/8 (8) / ' I 1L 26 (66) 22 (56) 2 3/4 (7) i ii ,K 24 IN. 26 (66) 23 (58) 2 1/2 (6) 1 / , ' I I (81 cm) 26 (66) 24 (61) 2 1/8 (5) 1 , I ( 131N. 26 (66) 25 (64) 1 3/4 (4) I ,, , 3 cm) 26 (66) 26 (66) 13/8 (3) 1 '' I 26 (66) 27 (69) 1 (2) �,_____ �"--- NOZZLE LOCATED 26 (66) 28 (71) 3/4 (2) ON PERIMETER 000183PC 24 IN. (81 cm) 27 (69) 18 (46) 3 5/8 (9) DIAMETER MAXIMUM 27 (69) 19 (48) 31/4 (8) 27 (69) 20 (51) 3 (8) Figure 3 -6. 27 (69) 21 (53) 2 3/4 (7) 27 (69) 22 (56) 2 3/8 (6) 27 (69) 23 (58 21/8 (5) 27 (69) 24 (61) 1 3/4 (4) 27 (69) 25 (64) 1 3/8 (3) 27 (69) 26 (66) 1 (2) 27 (69) 27 (69) 3/4 (2) 27 (69) 28 (71) 3/8 (1) 28 (71) 18 (46) 31/8 (8) 28 (71) 19 (48) 2 7/8 (7) 28 (71) 20 (51) 2 5/8 (7) 28 (71) 21 (53) 21/4 (6) 28 (71) 22 (56) 2 (5) 28 (71) 23 (58) 1 5/8 (4) 28 (71) 24 (61) 1 3/8 (3) 28 (71) 25 (64) 1 (2) 28 (71) 26 (66) 3/4 (2) 28 (71) 27 (69) 3/8 (1) 28 (71) 28 (71) 0 (0) ULEX 3830 April 1, 2004 PN551274(2)