Laserfiche WebLink
• <br /> 11•141„T, Material Safety Data Sheet <br /> MSDS No.: 259 <br /> Revision No.: 010 <br /> Revision Date: 08/17/04 <br /> Page: 2 of 2 <br /> EMERGENCY AND FIRST AID PROCEDURES <br /> Eyes: Immediately flush with plenty of water. Call a physician if symptoms occur. <br /> Skin: Immediately wipe off material and wash with soap and water. Material can adhere to the skin. If material has <br /> adhered to the skin, use an abrasive containing hand cleaner. If material does not come off, buff with a <br /> pumice stone. <br /> Inhalation: Move victim to fresh air if discomfort develops. Call a physician if symptoms persist. <br /> Ingestion: Seek medical attention. Do not induce vomiting unless directed by a physician. If a large quantity was ingest- <br /> ed, give 1 to 2 glasses of water to dilute. Never give anything by mouth to an unconscious person. <br /> Other: Referral to a physician is recommended if there is any question about the seriousness of the injury/exposure. <br /> CONTROL MEASURES AND PERSONAL PROTECTIVE EQUIPMENT <br /> Ventilation: General (natural or mechanically induced fresh air movements), <br /> Eye Protection: Not required, however, safety glasses should be wom in most industrial settings. <br /> Skin Protection: Avoid skin contact. Cloth gloves are suitable for hand protection. <br /> Respiratory Protection: None normally required. Where ventilation is inadequate to control vapors, use a NIOSHapproved respirator <br /> with organic vapor cartridges. Never enter a confined space without an appropriate air - supplied respirator. <br /> PRECAUTIONS FOR SAFE HANDLING AND USE <br /> Handling and Storing Precautions: Store in a cool, dry area preferably between 40o and 77o F. Keep from freezing. Do not store in <br /> direct sunlight. Avoid contact with the eyes or skin. Practice good hygiene; i.e. always wash thoroughly after <br /> handling and before eating or smoking. For industrial use only. Keep out of reach of children. Follow <br /> label /use instructions. <br /> Spill Procedures: Immediately wipe away spilled material before it hardens. Place in a container for proper disposal in accor- <br /> dance with all applicable local, state, or federal requirements. <br /> REGULATORY INFORMATION <br /> Hazard Communication: This MSDS has been prepared in accordance with the federal OSHA Hazard Communication Standard 29 CFR <br /> 1910.1200. <br /> HMIS Codes: Health 1, Flammability 0, Reactivity 0, PPE 8 <br /> ......................... _... <br /> DOT Shipping Name: Not regulated. <br /> IATA / ICAO Shipping Name: Not regulated. <br /> TSCA Inventory Status: Chemical components listed on TSCA inventory. <br /> SARA Title III, Section 313: This product contains < 3% ethylene glycol (CAS 107 -21 -1) and < 15% zinc borate (re: zinc compounds) <br /> which are subject to reporting under Section 313 of SARA Title III (40 CFR Part 372). <br /> EPA Waste Code(s): Not regulated by EPA as a hazardous waste. <br /> Waste Disposal Methods: Consult with regulatory agencies or your corporate personnel for disposal methods that comply with local, <br /> state, and federal safety, health and environmental regulations. <br /> CONTACTS <br /> Customer Service: 1 800 879 8000 Technical Service: 1 800 879 8000 <br /> Health / Safety: 1 800 879 6000 Jerry Metcalf (x6704) <br /> Emergency # (Chem - Trec): 1 800 424 9300 (USA, PR, Virgin Islands, Canada); 001 703 527 3887 (other countries) v, <br /> The information and recommendations contained herein are based upon data believed to be correct; however, no guarantee or warranty of any kind n <br /> expressed or implied is made with respect to the information provided. <br /> • <br /> --1 <br /> m <br /> • <br /> --1 <br /> D <br /> Saving Lives through innovation & education I Hilti Firestop Guide 2005 -2006 I 1 - 800 - 879 - 8000 I www.us.hilti.com 455 <br />