10-10031 - Laserfiche WebLink

Browse Search

• • A rJ / LStar• Gruvlok Product - Submittal Sheet €10 /.1NVI Figure 7400* Rigidlite Coupling The Figure 7400 Rigidlite Coupling from Gruvlok is specially designed to provide a rigid, locked -in pipe connection to meet the specific demands of rigid design steel pipe. Fast and easy swing -over installation of the rugged lightweight housing produces a secure, rigid pipe joint. The Figure 7400 Rigidlite Coupling is UL /ULC Listed and FM Approved for fire protection service in both wet and dry systems, with roll grooved or cut grooved steel pipe prepared in accordance with Gruvlok grooving specifications. Working pressure ratings shown are for reference only and are based on schedule 40 pipe. For the latest UL /ULC Listed and FM approved pressure ratings versus e aa pipe schedule, see www.anvilstar.com or contact your local AnvilStar Representative. The Figure 7400 Rigidlite Coupling with aDRI- SEALe, "C" Style, Grade E Type "A" gasket (coupling is easily identified by purple nuts) is intended for use in fire protection systems installed in accordance ❑ g— Available galvanized. with NFPA Standard 13 "Sprinkler Systems ". • When ordering, refer to product as FP7400. MATERIAL SPECIFICATIONS: Housing: Gaskets: Materials (Specify when ordering) Ductile Iron conforming to ASTM A -536, Grade 65- 45 -12. Flush gap gasket available ANSI Bolts and Heavy Hex Nuts: Properties as designated in accordance with ASTM D -2000 Heat,treated, oval neck track head bolts conforming to ASTM A -183 Grade ❑ DRI - SEAL° "C" Style Grade "E ", Type "A" Gasket (Violet color code) 2 with a minimum tensile strength of 110,000 psi and heavy hex nuts of -40 °F to 150 °F (Service Temperature Range)( -40 °C to 66 °C) carbon steel conforming to ASTM A -563. Bolts and nuts are provided zinc Recommended for wet and dry(oil free air) pipe fire protectio sprin- electroplated as standard, kler systems. For dry pipe systems and freezer applications, Gruvlok Metric Bolts and Heavy Hex Nuts: XtremeTN Lubricant is required. Heat treated, zinc electroplated oval -neck track head bolts made of carbon ❑ Grade "E" EPDM (Green color code) NSF -61 Certified steel with mechanical properties per ISO 898 -1 Class 8.8. Hex nuts and -40 °F to 230 °F (Service Temperature Range)( -40 °C to 110 °C) bolts are zinc electroplated followed by a yellow chromate dip. Recommended for water service, diluted acids, alkalies solutions, oil -free air and many chemical services. Stainless Steel Bolts and Nuts NOT FOR USE IN PETROLEUM APPLICATIONS. Stainless steel bolts and nuts are also available. Contact a AnvilStar Rep- ❑ Grade "T" Nitrile (Orange color code) resentative for more information. -20 °F to 180 °F (Service Temperature Range)( -29 °C to 82 °C) Coatings: Recommended for petrolium applications. air with oil vapors and ❑ Rust inhibiting lead -free paint Color: ORANGE (standard) vegetable and mineral oils. NOT FOR USE IN HOT WATER OR HOT AIR ❑ Hot Dipped Zinc Galvanized (optional) ❑ Other ❑ Other (Specify): (IE: RAL3000 or RAL9000) Gasket Type: (Specify) For other Coating requirements contact a AnvilStar Representative. ❑ Standard C Style Lubrication: (Specify) CI Flush Gap (11/4" - 8 ") ❑ Standard Gruvlok ❑ Gruvlok XtremeTM Recommended for dry pipe systems and freezer applications ❑ Other (Specify): PROJECT INFORMATION: APPROVAL STAMP: Project: undefined Date: undefined I Phone: undefined Architect / Engineer: undefined Contractor: undefined Address: undefined Notes 1: undefined Notes 2: undefined 3/05 - 3 For the latest UL/ULC Listed and FM Approved pressure ratings, versus pipe schedule, go to www.anvllstar.com or contact your local AnvilStar representative Page 1 of 2