10-11103 - Laserfiche WebLink

Browse Search

Zephyrhills Fire Rescue 6907 Dairy Road, Zephyrhills, FL 33542 Fire Marshal Bus (813) 780 -0041 Kerry Barnett Fax (813) 780 -0044 E -mail: kbarnett @fire.zephyrhills.fl.us Plan Review #: 10 -127 Project: Interior Renovation/Reconstruction Number of Pages: 21 October 27, 2010 I have received and reviewed the plans for the interior remodel /reconstruction of a single tenant space into two separate units located at 7320 Gall Blvd and will allow it to move forward under the following conditions listed below. Paying for permit, the contractor acknowledges complying with those conditions. Should anyone have any questions, please do not hesitate to contact the Fire Marshal's office. Inspections Required: 1. This structure contains and existing fire sprinkler system, however, now the structure is being divided into 2 separate units. The fire sprinkler system shall be separated into two systems each having its own riser. If unable to do, then system shall have a water flow valve installed at each unit to indicate where the flow is occurring. The FDC connection shall be a 5" turndown Storz connection. There shall be a sign above the connection stating FDC. Lettering shall be 6 "red reflective letters on white background. Separate plans, cut sheets, details, calcs, etc... will be required to obtain a permit to complete this work. Ensure the all canopies have sprinkler protection. 2. This structure contains and existing fire alarm system, however, now the structure is being divided into 2 separate units. The fire alarm system shall be separated into two systems if the sprinkler system is separated. If not, the system shall be an addressable system with every device programmed to the panel with a location. The device shall be labeled to match the panel program. Ensure duct detectors are tied into the system. Separate plans, cut sheets, details, calcs, etc... will be required to obtain a permit to complete this work. Ensure there is an outside strobe horn at the main door of each unit. 3. Extinguisher location may need to be changed to ensure they are visible. Extinguisher placarding may be required showing location. 4. Ensure secondary exits have panic hardware. 5. Ensure address is located at front and rear of building. 6" numerical numbers required. 6. The building contains lightweight bar joist trusses. Per FAC 69A- 60.008, a lightweight truss sign shall be installed on the building. An "R" sign will be the correct one. It shall be located at the main door and every 100 feet. It shall also be required at each secondary exit door. 7. Ensure main disconnect to each unit is visibly marked. 8. Once project is complete, a key for the knox box will be required. 9. All penetrations to fire wall shall be done in an approved, listed method.