|
Jeld , Wen Inc.
<br /> NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
<br /> A. DRAWINGS
<br /> 1. Manufacturer's parts and sections drawings.
<br /> 2. Drawing No "DC9970 -1 ", titled "6' -8" & 8' -0 Single Inswing Opaque Steel Edge ", sheets 1
<br /> through 5 of 5, dated 12 -07 -07 and last revised on 02- 05 -08, prepared by the manufacturer,
<br /> signed and sealed by Nimesh Bhaysar, P.E.
<br /> B. TESTS (Photo copies from files # 02- 1211.11), original test report conducted per SFBC, 201,
<br /> 202 and 203 -94, now termed as FBC, TAS 201, 202 and 203 -94.
<br /> 1. Test report on
<br /> 1) Air Infiltration Test, per TAS 202 -94
<br /> 2) Uniform Static Air Pressure Test, Loading per TAS 202 -94
<br /> 3) No Water Resistance Test performed.
<br /> 4) Large Missile Impact Test per FBC, TAS 201 -94
<br /> 5) Cyclic Wind Pressure Loading per FBC, TAS 203 -94
<br /> 6) Forced Entry Test, per PA 202 -94
<br /> along with marked -up drawings and installation diagram of single outswing and inswing
<br /> residential insulated steel doors, prepared by Certified Testing Laboratories, Test Report No(s)
<br /> Test Report No, CTLA455W, dated October 11, 1999 and CTLA650W, dated January 03, 2001
<br /> and, both signed and sealed by Ramesh Patel, P.E.
<br /> C. CALCULATIONS:
<br /> 1. Anchor calculations prepared by O.M. Engineering Services Inc., dated 02- 06 -08, signed and
<br /> sealed by Nimesh Bhaysar, P. E.
<br /> D. QUALITY ASSURANCE BY;
<br /> 1. Miami -Dade County Building Codc Compliance Office (BCCO).
<br /> E. MATERIAL CERTIFICATIONS (Photo copies from files # 02- 1211.11)
<br /> 1. Tensile Test prepared by Certified Testing Laboratories, Test Report No. CTLA455W, dated
<br /> October 11, 1999, for steel samples, tested per ASTM E8 -93a, signed and sealed by signed
<br /> and sealed by Ramesh Patel, P.E.
<br /> 2. Test Report No. ITS- J99006660 -001, prepared by Intertek Testing Services NA, Inc., issued
<br /> to Jeld -Wen Research and Development, dated April 8, 1999, for samples of foam, tested per
<br /> ASTM E 84 -94 "Standard Test Methods for Surface Burning Characteristics of Building
<br /> Materials" and ASTM D 1929 -91A "Standard Test Method for Ignition Properties of
<br /> Plastics "; signed and sealed by Douglas Keith Tucker, P.E.
<br /> F. STATEMENTS
<br /> 1. Letter of conformance & "No financial interest" dated February 01, 2008, signed and sealed
<br /> by Nimesh Bhaysar, P.E.
<br /> 2. Laboratory Statement of compliance, part of the test report CTLA455W & CTLA650W,
<br /> signed and sealed by Ramesh Patel, P.E.
<br /> F. OTHER
<br /> 1. This NOA renews NOA # 02- 1211.11, expiring February 11, 2008.
<br /> 1 ,4101 l . l itAvtek.
<br /> shag I Chanda, P.E.
<br /> Product Control Examiner
<br /> NOA No 08- 0208.06
<br /> Expiration Date: February 11, 2013
<br /> Approval Date: March 20, 2008
<br /> E - l
<br />
|