Laserfiche WebLink
Limitations <br /> 1. This product has been evaluated and is in compliance with the 2007 Florida Building Code <br /> (FBC) structural requirements including the "High Velocity Hurricane Zone" (HVHZ). <br /> 2. Product anchors shall be as listed and spaced as shown on details. Anchor embedment to <br /> base material shall be beyond wall dressing or stucco. <br /> 3. When used in the "HVHZ ", this product is required to be protected with an impact resistant <br /> covering that complies with Section 1626 of the Florida Building Code. <br /> 4. When used in areas outside of the "HVHZ" requiring wind borne debris protection, this <br /> product is required to be protected with an impact resistant covering that complies with <br /> Section 1609.1.2 of the Florida Building Code. <br /> 5. For 2x stud framing construction, anchoring of these units shall be the same as that shown <br /> for 2x buck masonry construction. Increase anchor length to account for any sheathing or <br /> wall covering. <br /> 6. Site conditions that deviate from the details of drawing FL 6163.2 require further <br /> engineering analysis by a licensed engineer or registered architect. <br /> 7. This product meets water infiltration requirements for "HVHZ ". <br /> 8. See drawing FL 6163.2 for size and design pressure limitations. <br /> Lyndon F. Schmidt, P.E. <br /> FL No. 43409 <br /> December 16, 2008 <br /> PF 907 Sheet 2 of 3 <br />