11-11533 - Laserfiche WebLink

Browse Search

CARLISLE'S V�� L .� GUIDE-SPEC MECHANICALLY-FASTENED ROOFING SYSTEM December, 2004 This GUIDE-SPEC is a brief outline of Carlisle's Sure- F1exT"' Mechanically-Fastened Roofing System requirements and A. To ensure compliance with Carlisle's warranty requirements, is intended for use as a submittal with a bid package. Specifiers the following projects should be forwarded to Carlisle for and the Carlisle Authorized Roofing Applicator must comply with review prior to installation, preferably prior to bid. our Sure-Flex Specification prior to design or bid. 1. Projects with fasteners specified to exceed 12". PART1 GENERAL 2. Air pressurized buildings, canopies and buildings with 1.01 DESCRIPTION lazge openings where the total wall opening exceeds 10% of the total wall area where openings aze located. The Sure-FIexTM Mechanically-Fastened Roofing System incorporates Sure-Flex Polyvinyl Chloride (PVC) membrane, 3 Cold storage buildings and freezer facilities. available in 81" wide field sheets and 40.5" perimeter sheets. All sheets are mechanically fastened over an approved 4. Projects where the membrane is expected to come in insulation/underlayment to an acceptable roof deck with the direct contact with petroleum-based products or other appropriate Carlisle Fasteners and Fastening Plates. The chemicals. membrane is available in white, tan or gray and in thicknesses of 50-mil (100' long), 60-mil (80' long) or 80-mil (65' long). B. Along with the project submittals (shop drawings and Adjoining sheets of Sure-Flex membrane are overlapped and Request for Warranty), the roofing contractor must include joined together with a minimum 1-1/2 inch wide heat weld. pullout tests when the pullout values are less than the Sure- Membrane fastening requirements aze outlined in "Attachment II" Flex Specification requirements. in Carlisle's Sure-Flex Specification. C. For all projects (prior to proj ect inspection by Carlisle) a final Notes: Projects utilizing 50- or 60-mil membrane are eligible shop drawing must be approved by Cazlisle. for a ma�cimum 10-year System Warranty or 15-year Total System Warranty When a 20-year Total System 1.04 PRODUCT DELIVERY, STORAGE AND NANDLING Warranty is required, 80-mil membrane must be used. A. Deliver materials to the job site in the original, unopened 1.02 QUALITY ASSURANCE containers labeled with the manufacturer's name, brand name and installation instructions. A. This roofing system must be installed by a Carlisle Authorized Roofing Applicator in compliance with shop B Store Sure-Flex membrane on provided pallets in the original drawings as approved by Carlisle. There must be no undisturbed plastic wrap. deviations made without the PRIOR WRITTEN APPROVAL of Carlisle. C. Job site storage temperatures in excess of 90°F inay affect shelf life of curable materials (i.e., adhesives and sealants). B. Upon completion of the installation, an inspection will be conducted by a Field Service Representative of Carlisle to D When liquid adhesives and sealants are exposed to lower ascertain that the membrane roofing system has been installed temperatures, restore to a minimum of 60°F before use. according to Carlisle's published specifications and details applicable at the time of bid. E. Do not store adhesive containers with opened lids due to the loss of solvent which will occur from flash off. C. This roofing system meets Underwriters Laboratories (ITL) and Factory Mutual (FM) requirements. For specific code F. Insulation and underlayment must be stored so it is kept dry approvals achieved with this roofing system, refer to the and is protected from the elements. Store insulation on a skid Sure-Flex Code Approval Guide, Factory Mutual Approval and completely cover with a breathable material such as tarp Guide or Underwriters Fire Resistance and Roofing Materials or canvas. If insulation is lightweight, it should be weighted and Systems Directories. to prevent possible wind damage � • � 1.05 JOB CONDITIONS � 1.03 SUBMITTALS A. This system must not be �M� �Tec Incorpora�d 602125 1 Sure-Flex "MF" Guide - 12/2004