Laserfiche WebLink
APPROVED ASSEMBLIES: <br /> Deck Type 1: Wood, Non-insulated <br /> � Deck Description 19 /32�� or greater plywood or wood plank <br /> System E(1): Anchor sheet mechanically fastened deck, membrane adheted, <br /> Base Sheet: One or more plies of ASTM D 226 Type II or ASTM D 2626 with a minimum 4" <br /> side Iap and a 6" end lap mechanically fastened to deck with approved nails and tin <br /> caps 6" o.c_ at the laps and two staggered rows 12" o.c. the field of the roll. <br /> Membrane: One or more plies of TW Metal and Tile Underlayment widi a minimum 4" side <br /> lap and 6" end lap. Place the first course of inembrane parallel to the eave, rolling <br /> the membrane to obtain ma�cimum contact. Remove the release liner as the <br /> membrane is applied. Vertical strapping of the roof with TW Metal and Tile <br /> Underlayrnent is acceptable. <br /> Surfacing: Approved Mechanicaliy Fastened Tile or Metal Roofing Assembly or Any <br /> Approved Rooftng Assemblies where an ASTM D 1970 underlayment is allowed. <br /> Deck Type 1: Wood, Non-insulated <br /> Deck Description 19 �32 „ or greater plywood or wood ptank <br /> System E(2): Anchor sheet mechanically fastened deck, membrane adhered. <br /> Base Sheet: One or more plies of ASTM D 226 Type II or ASTM D 2626 with a minimum 4" <br /> side lap and a 6" end lap mechanically fastened to deck with approved nails and tin <br /> caps 6" o.c. at the laps and two staggered rows 12" o.c. the feId of the roll. <br /> Membrane: One or more plies of Moistnre Guard Plns with a minimum 3.5" side lap and 6" <br /> end lap. Place the first course of inembrane parallet to the eave, rolling the <br /> membrane to obta.in maximum contact Remove the release liner as the membrane <br /> is applied. Vertical strapping of the roof with Moisture Guard Plus is acceptable. <br /> Surfacing: Any Approved Roofing Assemblies where an ASTM D 1970 underlayment is <br /> allowed. <br /> Deck Type 1: Wood, Non-insulated <br /> Deck Descriptiun; 19 /, Z " ar greater plywood or wood piank <br /> System E(3): Anchor sheet mechanically fastened deck, membrane adhered. <br /> Base Sheet: One or more piies of ASTM D 226 Type II or ASTM D 2626 wi� a minimum 4" <br /> side lap and a 6" end lap mechanically fastened to deck with approved nails and tin <br /> caps 6" o.c. at the laps and two staggered rows 12" o.c. the field of the roll. <br /> Membrane: One or more plies of TW Underlayment with a minunum 4" side lap and 6" end <br /> lap. Place the first course ofinembrane parallel to the eave, rolling the membrane <br /> to obta.in m�imum contact. Remove the release liner as the membrane is applied. <br /> Vertical strapping of the roof with TW UnderIayment is acceptable. <br /> Snrfacing: Any Approved Roofing Assemblies where an ASTM D 1970 underlayment is <br /> allowed. <br /> NOA No.: 07-] 130.01 <br /> Eapiration Date: 07/OS/I2 <br /> Approval Date: 02/28/08 <br /> Page 3 of 4 <br />