12-12801 - Laserfiche WebLink

Browse Search

DN-6726:C1 •H-240 �' NBG==�iT2LX� N OT 1 F 1 E R° ,� ..,�: v�..��<<,�.,..�:.:�: Y� �J Addressable Manual Pull Station _ by Honeywell , General The Notifier NBG-12LX is a state-of-the-art, dual-action (i.e., requires two motions to activate the station) pull statian that �° _ inciudes an addressabie intertace for any Notifier inteiligent ; � ,. -..� control panel except FireWarden series panels, and the NSP- 25 panel. Because the NBG-12LX is addressable, the control Y� panel can display the exact location of the activated manual station.This leads fire personnel quickiy to the location of the alarm. Features • Maintenance personnei can open station for inspection and address setting without causing an alarm condition. • Built-in bicolor LED, which is visible through the handle of � the station, flashes in normal operation and latches steady . � red when in alarm � • Handle latches in down position and the word"ACTIVATED" appears to clearly indicate the station has been operated. • Captive screw terminals wire-ready for easy connection to The NBG-12LX SLC loop(accepts up to 12 AWG/3.25 mm wire). • Can be surtace mounted (with SB-10 or Se-I/O) or semi- Addressable Manual Pull Station flush mounted. Semi-flush mount to a standard single- gang,double-gang,or 4"(10.16 cm)square electrical box. Installation • Smooth dual-action design. The NBG-12LX will mount semi-flush into a single-gang,dou- • Meets ADAAG controls and operating mechanisms guide- ble-gang, or standard 4" (10.16 cm) square electrical outlet lines (Section 4.1.3[13]); meets ADA requirement for 5 Ib. box, or wiil surtace mount to the model SB-10 or S8-I/O sur- maximum activation force. face backbox. If the NBG-12LX is being semi-flush mounted, • Highly visible. - then the optional trim ring (BG12TR) may be used. The • Attractive shape and textured finish. BG12TR is usually needed for semi-ilush mounting with 4" (10.16 cm)or double-gang boxes(not with single-gang boxes). • Key reset. • Includes Braille text on station handle. �peration � • Optional trim ring(BG12TR). • Meets UL 38, Standard for Manualiy Actuated Signaling Pushing in,then pulling down on the handle causes it to latch Boxes. in the down/activated position. Once latched,the word"ACTI- VATED" (in bright yellow) appears at the top of the handle, • Up to 99 NBG-12LX stations per loop on CLIP protocol While a portion of the handle protrudes from the bottom of the loops. station.To reset the station,simply uniock the station with the • Up to 159 NBG-12LX stations per loop on FlashScan�pro- key and pull the door open.This action resets the handle;clos- tocol loops. ing the door automatically resets the switch. • Dual-color LED blinks green to indicate normal on FlashS- Each manual station, on command from the control panel, can�systems. sends data to the panel representing the state of the manual switch.Two rotary decimal switches allow address settings Construction (1 —159 on FlashScan�systems, 1 —99 on CLIP systems). Sheli, door, and handle are moided of durable polycarbonate materiai w�tn a textured tinisn. Architectural/Engineering Specifications Specifications Manual Fire Alarm Stations shall be non-coded, with a key- • Shipping Weight:9.6 oz.(272.15 g) operated reset lock in order that they may be tested, and so • Normal operating voltage:24 VDC. designed that after actual Emergency Operation, they cannot Maximum SLC loop voltage:28.0 VDC. be restored to normal except by use of a key.An operated sta- � tion shall automatically condition itself so as to be visually • Maximum SLC loop current:375�A. detected as activated. Manual stations shall be constructed of • Temperature Range:32°F to 120°F(0°C to 49°C) red-colored polycarbonate material with clear�y visible operat- • Relative Humidity: 10%to 93%(noncondensing) ing instructions provided on the cover The word FIRE shall • For use indoors In a dry location appear on the front of the stations in white letters, 1.00 inches (2.54 cm) or larger. Stations shall be suitable for surtace mounting on matching backbox SB-10 or SB-I/O;or semi-flush mounting on a standard single-gang, double-gang, or 4" DN-6726:C1•8/16/10—Page 1 ot 2