Laserfiche WebLink
� <br /> TRINITY�ERD <br /> 4. PRODUCT DESCRIPTION: <br /> 4.1 Royal Sovereign is a fiberglass reinforced, 3-tab asphalt roof shingles. <br /> 4.2 Camelot, Camelot II / Camelot 30, Capstone, Country Mansion, Country Mansion II, Grand <br /> Canyon, Grand Sequoia, Grand Slate, Grand Slate II, Timberline ArmorShield II, Timberline <br /> Natural Shadow, Timberline HD / Timberiine Prestique 30, Timberline Prestique 40 / Timberline <br /> Cool Series, Timberline Ultra HD / Timberline Prestique Lifetime, and Timberline Majestic / <br /> Timberline Majestic 30 are fiberglass reinforced, laminated asphalt roof shingles. <br /> 4.3 Slateline is a fiberglass reinforced, 5-tab asphalt roof shingle. <br /> 4.4 SeaI-A-Ridge, SeaI-A-Ridge Armorshield, Ridglass 8, Ridglass 10, Ridglass 12 and Timbertex Hip <br /> and Ridge are fiberglass reinforced, hip and ridge asphalt roof shingles. <br /> 4.5 ProStart Starter is a starter strip for asphalt roof shingles. <br /> 5. LIMITATIONS: <br /> 5.1 This Evaluation Report is not for use in the HVHZ. <br /> 5.2 Fire Classification is not part of this Evaluation Report; refer to current Approved Roofing <br /> Materials Directory for fire ratings of this product. <br /> 5.3 Wind Classification: <br /> 5.3.1 All GAF shingles noted herein are Classified in accordance with FBC 'Tables 1507.2.10 and <br /> R905.2.6.1 to ASTM D3161, Class F or ASTM D7158, Class H, indicating the shingles are <br /> acceptable for us in all wind zones up to 150 mph. Refer to Seckion 6 for installation <br /> requirements to meet this wind rating. <br /> 5.3.2 Classification by this method applies to buildings less than 60 feet high and with Wind Exposure <br /> B and C only in an Occupancy Category of I or II. <br /> 5.3.3 For buildings falling outside the constraints in 5.3.1 or 5.3.2, calculations by a qualified design <br /> professional in accordance with UL2390 / ASTM D7158 / ASCE 7 may be conducted for the <br /> specific project with data for the specific shingle. Contact the shingle manufacturer for data <br /> specific to each shingle. <br /> 5.3.4 All GAF hip & ridge shingles noted herein have been evaluated in accordance with ASTM D3161, <br /> Class F. Refer to Section 6 for installation requirements to meet this wind rating. <br /> 5.5 All products in the roof assembly shall have quality assurance audit in accordance with the <br /> Florida Building Code and F.A.C. Rule 9N-3. <br /> 6. INSTALLATION: <br /> 6.1 Underlayment: <br /> 6.1.1 Underlayment shall be acceptable to GAF Materials Corporation and shall hold current FBC <br /> Approval, or be Locally Approved per Rule 9N-3, per FBC Sections 1507.2,3 and/or 1507.2.4. <br /> Exterior Research and Design, LLC. Evaluation Report 01506.01.08-R5 <br /> Certi�cate of Authorization#9503 FL 10124-R4 <br /> Revision 6: 02/02/2011 <br /> Page 3 of 4 <br />