Laserfiche WebLink
SPEC. DESCRIPTION OF WORK LOCATION COST <br /> 87 PAINTING- GENERAL SPECIFICATIONS <br /> Pressure clean, scrape and prepare exterior for painting, <br /> by following the paint manufactures recommended <br /> preparation instructions. Apply a primer to the whole exterior <br /> of the surfaces to be painted, primer to be specific to the surface <br /> being applied to. When primer has set, paint the entire exterior <br /> of the house, including all exposed wood, concrete, stucco <br /> masonry and ferrous metal. Paint with two (2) coats of 100% acrylic <br /> elastomeric paint, follow manufactures recommended drying time <br /> between coats. Paint coating thickness shall be a min. Smm per coat. <br /> The roller and brush method of application will only be used on this <br /> building to assure the proper penetration and thickness of the paint <br /> coatings. No spraying will be permitted on the exterior. <br /> Contractor to advise the Housing Specialist of the start time <br /> of this process. All materials must be verified by the Housing <br /> Specialist and inspected between coatings. Failure to notify <br /> the Housing Specialist, 2 days lead time, and starting the paint <br /> process without prior approval, will result in the work being rejected <br /> and the process starting from the beginning at the contractors expense. <br /> Contractor to furnish manufactures preparation and application <br /> recommendation specifications of all products used, to the Housing <br /> Specialist prior to the start of the primer process. Exterior <br /> Color of body to be Daybreak Sun ECC-11-1U and trim <br /> color to be pure white colors are off Behr paint chart. <br /> Include painting of soffit and fascia, overhead garage door. Info Only <br /> PAGE TOTAL: <br /> GDR/EP/EF ADDENDUM TOTAL: <br /> CASE #10-6169 7906 Merchantville 3/8/2012 PAGE 2 <br />